A1 Auto Parts
325-235-2420
a1auto@a1-autoparts.com
10525 S IH 20
Sweetwater
TX 79556



PDF associated: /2022PRECISIONUJOINT.pdf
2022 UNIVERSAL JOINT CATALOG 2022 UNIVERSAL JOINT CATALOG UNIVERSAL JOINTS iii CONTENTS PREMIUM U-JOINT CATALOG Features and Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv-v Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-109 Application Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-15 Dimensional Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-27 PTO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-105 Strap Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106-109 Cross Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110-127 Application Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129-2378 Universal Joints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-1964 U-Joint Strap Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1965-2146 U-Joint Bolt Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2147-2378 IMPORTANT NOTICE The data listed herein is correct to the best of our knowledge and belief, having been compiled from reliable and official sources of information. However, we cannot assume any responsibility for possible errors. © Copyright 2022 by Ozark Automotive All rights reserved. No part of this book may be reproduced in any form without specific written permission by the copyright owner. UNIVERSAL JOINTS iv STANDARD U-JOINTS Features & Benefits •Special Corrosion Resistant steel alloy cross •High Strength Steel needle bearings •Multi-Stage Testing prior to assembly •Precision Ground bearing caps and trunnions •Exact Fit snap ring included HEAVY DUTY U-JOINTS Features & Benefits •Nitrile Rubber seals provide optimal grease retention and reduce contamination •Bearing surfaces are case hardened to uniform depths for Higher Strength and Durability •Journal Trunnion ends are Precision Ground to length ensuring Proper Fit of mating parts Precision offers Heavy Duty U-Joints to meet all of your fleets’ needs including: •Commercial •Industrial •Heavy Duty •Medium Duty •Agricultural Precision carries premium U-Joints to cover all your needs. Manufactured to meet or exceed OE standards, you can count on the strength and durability to get you where you need to go. UNIVERSAL JOINTS v COATED ANTI-GALVANIC U-JOINTS FOR USE IN ALUMINUM YOKES Typically, most vehicles use steel yokes and driveshafts. To reduce vehicle weight and improve gas mileage, some manufacturers have introduced aluminum driveshafts and yokes for certain vehicles. When a plain, steel U-Joint is installed onto one of these aluminum yokes, it will drastically increase the rate of corrosion, called galvanic corrosion. To combat this, Precision offers a specially designed U-Joint with chemically coated bearing caps that prevent this galvanic corrosion between the steel U-Joint and the aluminum yoke. For any application using an aluminum yoke, please use a Precision anti-galvanic coated Universal Joint for added corrosion protection. Aluminum Coated U-Joint Standard U-Joint 369C..................369 330C..................330 331C..................331 231C..................231 354C..................433 351C...............534G 355C..................355 372C..................372 458C..................458 ALUMINUM COATED APPLICATION DIAGRAMS 2UNIVERSAL JOINTS REFERENCE 275 UNIVERSAL JOINTS REFERENCE Application Diagrams 3UNIVERSAL JOINTS REFERENCE 276 UNIVERSAL JOINTS REFERENCE Application Diagrams 4UNIVERSAL JOINTS REFERENCE 277 UNIVERSAL JOINTS REFERENCE Application Diagrams 5UNIVERSAL JOINTS REFERENCE 278 UNIVERSAL JOINTS REFERENCE Application Diagrams 6UNIVERSAL JOINTS REFERENCE 279 UNIVERSAL JOINTS REFERENCE Application Diagrams 7UNIVERSAL JOINTS REFERENCE 280 UNIVERSAL JOINTS REFERENCE Application Diagrams 8UNIVERSAL JOINTS REFERENCE 281 UNIVERSAL JOINTS REFERENCE Application Diagrams 9UNIVERSAL JOINTS REFERENCE 282 UNIVERSAL JOINTS REFERENCE Application Diagrams 10UNIVERSAL JOINTS REFERENCE 283 UNIVERSAL JOINTS REFERENCE Application Diagrams 11UNIVERSAL JOINTS REFERENCE 284 UNIVERSAL JOINTS REFERENCE Application Diagrams 12UNIVERSAL JOINTS REFERENCE 285 UNIVERSAL JOINTS REFERENCE Application Diagrams 13UNIVERSAL JOINTS REFERENCE 286 UNIVERSAL JOINTS REFERENCE Application Diagrams 14UNIVERSAL JOINTS REFERENCE 287 UNIVERSAL JOINTS REFERENCE Application Diagrams 15UNIVERSAL JOINTS REFERENCE 288 UNIVERSAL JOINTS REFERENCE Application Diagrams 16UNIVERSAL JOINTS REFERENCE 289 UNIVERSAL JOINTS REFERENCE DI 392 0.788 1.496 Cap-1 385 0.886 1.492 Cap-1 1501 0.938 1.4 Cross-1 338 0.938 1.496 Cross-1 838 0.938 1. Cap-1 983 0.968 1.689 Cross-1 861 0.969 1.448 Cross-1 839 0.969 1.448 Cap-1 Cross-1 397 0.984 1.717 Cap-1 391 0.984 1.732 Cap-1 514G 1 1.717 Cap-1 507 1 2.344 Cross-1 394 1.024 1.843 Cap-1 390 1.024 2.205 Cross-1 386 1.043 1.984 Cap-1 436 1.063 1.641 None 995 1.063 1.654 Cross-1 446 1.063 1.933 None 378 1.063 2.188 Cap-1 365 1.063 2.189 None 429 1.063 2.193 Cross-1 225 1.063 2.193 Cross-1 368 1.063 2.205 Cross-1 270 1.063 2.262 Cross-1 354C 1.063 2.634 Cross-1 433 1.063 2.661 Cross-1 254 1.063 2.661 Cross-1 315G 1.078 2.118 Cross-1 17UNIVERSAL JOINTS REFERENCE 290 UNIVERSAL JOINTS REFERENCE DI 317 1.078 2.118 Cap-1 245 1.078 2.118 Cross-1 246 1.078 2.118 Cap-1 315 1.078 2.118 Cross-1 832M 1.078 2.125 Cross-1 393 1.102 2.209 Cross-1 384 1.102 2.323 Cap-1 513 1.125 2.118 Cap-1 Cross-1 235 1.125 2.374 Cross-1 351C 1.125 2.374 Cross-1 534G 1.125 2.563 Cross-1 545 1.125 3.251 Cross-1 492 1.126 2.37 None 316 1.127 2.622 Cross-1 248 1.127 2.622 Cross-1 285 1.142 2.047 Cross-1 387 1.142 2.047 Cross-1 383 1.142 2.087 Cross-1 411 1.142 2.835 Cap-1 450 1.181 2.287 Cross-1 412 1.181 2.925 Cross-1 377 1.188 2.069 Cap-1 371 1.188 2.187 None 423 1.188 2.556 Cross-1 427 1.188 3.117 Cross-1 305 1.23 2 Cross-1 304 1.23 2.969 Cross-1 389 1.26 2.52 Cross-1 888 1.31 2.791 Cross-1 958 1.313 3.28 Cross-1 567 1.313 4.313 Cross-1 816 1.339 2.217 Cross-1 464 1.375 2.925 Cross-1 374 1.375 2.996 Cross-1 479 1.375 3.702 Cross-1 424 1.375 3.78 Cross-1 923 1.625 4.375 Cross-1 18UNIVERSAL JOINTS REFERENCE 291 UNIVERSAL JOINTS REFERENCE DO 810 0.563 1.5 None 405 0.75 1.906 None 395 0.787 2.244 Cap-1 410 0.788 2.157 Cap-1 811 0.866 2.126 Cross-1 812 0.866 2.157 Cross-1 870 0.875 2.433 Cap-1 853 0.875 2.938 Cross-1 341 0.938 2.413 Side of Cross-1 340 0.938 2.413 None 341AG 0.938 2.413 Center of Cross-1 413 0.945 2.492 None 399 0.984 3.024 None 398 0.985 2.517 Cap-1 856 1 3.909 Cross-2 408 1.024 2.748 Cross-1 380 1.06 3.2 Cap-1 813 1.06 2.756 Cross-1 437 1.063 2.439 None 437G 1.063 2.439 Cap-1 240 1.063 2.439 Cap-1 409 1.063 2.657 None 344AG 1.063 2.925 Cross-1 344 1.063 2.937 Cross-2 369 1.063 3.22 Cross-1 379 1.063 3.22 Cross-1 Plug 280 1.063 3.22 Cross-1 19UNIVERSAL JOINTS REFERENCE 292 UNIVERSAL JOINTS REFERENCE DO 369C 1.063 3.22 Cross-1 354 1.063 3.622 Cross-1 345 1.063 3.622 Cross-1 396 1.122 3.067 Cross-1 880 1.126 2.624 Cross-1 882 1.126 2.624 Cap-1 451 1.181 3.217 Cross-1 456 1.188 3.228 None 331 1.188 3.624 Cross-1 231 1.188 3.624 None 331A 1.188 3.624 Cross-1 232 1.188 3.624 Cross-1 331C 1.188 3.624 Cross-1 231C 1.188 3.624 None 331AG 1.188 3.624 Center of Cross-1 330 1.188 4.185 Cross-1 330A 1.188 4.185 Cross-1 295 1.188 4.185 Cross-1 330C 1.188 4.185 Cross-1 471 1.188 4.193 Cross-1 815 1.189 3.15 Cross-1 890 1.25 4.063 Cross-1 964 1.251 3.21 Cross-1 934 1.251 3.21 Cap-1 814 1.26 2.988 Cross-1 382 1.299 3.661 Cross-1 818 1.375 3.701 Cross-1 351 1.375 4.185 Side of Cross-1 351A 1.375 4.185 Side of Cross-1 351AG 1.375 4.185 Center of Cross-1 351R 1.375 4.187 Cross-1 358A 1.375 4.96 Cross-1 358 1.375 4.965 Cross-1 432 1.375 4.969 Side of Cross-1 461 1.378 4.091 Cross-1 817 1.417 3.496 Cross-1 889 1.534 4.307 Cross-1 428 1.551 4.181 Cross-1 370 1.563 4.565 Cross-1 462 1.575 4.528 Cross-1 819 1.614 4.252 Cross-1 359 1.623 5.591 Cross-1 20UNIVERSAL JOINTS REFERENCE 293 UNIVERSAL JOINTS REFERENCE DO 460 1.625 4.961 Cross-1 898 1.625 5.064 Cross-1 821 1.657 4.075 Center of Cross-1 892 1.935 5.13 Cross-1 899 1.938 5.934 Cross-2 893 1.997 5.937 Cross-1 578 2.162 6.45 Cross-1 932 2.185 8.11 Cross-1 579 2.362 6.417 Cross-1 Type Grease 840 4 GROOVED 0.938 0.97 1.444 1.485 - - Cross-1 505 2 PLAIN 2 GROOVED 1 1.063 2.339 - - 3.22 Cross-1 361 2 PLAIN 2 GROOVED 1 1.063 - 1.715 2.441 - Cross-1 498 4 GROOVED 1 1.125 2.339 2.339 - - Cross-1 445 2 PLAIN 2 GROOVED 1.063 1.063 - 2.344 3.22 - Cross-1 431 2 PLAIN 2 GROOVED 1.063 1.063 - 2.38 3.622 - Cross-1 455 2 PLAIN 2 GROOVED 1.063 1.063 - 3.219 2.188 - Cross-1 353 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 275 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 319 2 PLAIN 2 GROOVED 1.063 1.078 2.378 2.118 3.219 - Cross-1 293 UNIVERSAL JOINTS REFERENCE DO 460 1.625 4.961 Cross-1 898 1.625 5.064 Cross-1 821 1.657 4.075 Center of Cross-1 892 1.935 5.13 Cross-1 899 1.938 5.934 Cross-2 893 1.997 5.937 Cross-1 578 2.162 6.45 Cross-1 932 2.185 8.11 Cross-1 579 2.362 6.417 Cross-1 Type Grease 840 4 GROOVED 0.938 0.97 1.444 1.485 - - Cross-1 505 2 PLAIN 2 GROOVED 1 1.063 2.339 - - 3.22 Cross-1 361 2 PLAIN 2 GROOVED 1 1.063 - 1.715 2.441 - Cross-1 498 4 GROOVED 1 1.125 2.339 2.339 - - Cross-1 445 2 PLAIN 2 GROOVED 1.063 1.063 - 2.344 3.22 - Cross-1 431 2 PLAIN 2 GROOVED 1.063 1.063 - 2.38 3.622 - Cross-1 455 2 PLAIN 2 GROOVED 1.063 1.063 - 3.219 2.188 - Cross-1 353 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 275 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 319 2 PLAIN 2 GROOVED 1.063 1.078 2.378 2.118 3.219 - Cross-1 293 UNIVERSAL JOINTS REFERENCE DO 460 1.625 4.961 Cross-1 898 1.625 5.064 Cross-1 821 1.657 4.075 Center of Cross-1 892 1.935 5.13 Cross-1 899 1.938 5.934 Cross-2 893 1.997 5.937 Cross-1 578 2.162 6.45 Cross-1 932 2.185 8.11 Cross-1 579 2.362 6.417 Cross-1 Type Grease 840 4 GROOVED 0.938 0.97 1.444 1.485 - - Cross-1 505 2 PLAIN 2 GROOVED 1 1.063 2.339 - - 3.22 Cross-1 361 2 PLAIN 2 GROOVED 1 1.063 - 1.715 2.441 - Cross-1 498 4 GROOVED 1 1.125 2.339 2.339 - - Cross-1 445 2 PLAIN 2 GROOVED 1.063 1.063 - 2.344 3.22 - Cross-1 431 2 PLAIN 2 GROOVED 1.063 1.063 - 2.38 3.622 - Cross-1 455 2 PLAIN 2 GROOVED 1.063 1.063 - 3.219 2.188 - Cross-1 353 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 275 4 PLAIN 1.063 1.063 - - 3.211 3.618 Cross-1 319 2 PLAIN 2 GROOVED 1.063 1.078 2.378 2.118 3.219 - Cross-1 21UNIVERSAL JOINTS REFERENCE 294 UNIVERSAL JOINTS REFERENCE Type Grease 457 2 PLAIN 2 GROOVED 1.063 1.079 - 2.118 3.622 - Cross-1 430 2 PLAIN 2 GROOVED 1.063 1.125 2.35 2.193 3.217 3.217 Cross-1 255 2 PLAIN 2 GROOVED 1.063 1.125 2.35 - - 3.217 Cross-1 372C 2 PLAIN 2 GROOVED 1.063 1.125 2.379 2.556 3.218 - Cross-1 372 2 PLAIN 2 GROOVED 1.063 1.125 2.379 2.556 3.218 - Cross-1 434 2 PLAIN 2 GROOVED 1.063 1.125 2.771 - 3.622 3.622 Cross-1 265 2 PLAIN 2 GROOVED 1.063 1.125 2.771 - 3.622 3.622 Cross-1 458C 2 PLAIN 2 GROOVED 1.063 1.125 2.78 2.624 3.619 - Cross-1 458 2 PLAIN 2 GROOVED 1.063 1.125 2.78 2.624 3.619 - Cross-1 355 2 PLAIN 2 GROOVED 1.063 1.125 - 2.559 3.622 - Cross-1 449 2 PLAIN 2 GROOVED 1.063 1.125 - 2.636 3.22 3.636 Cross-1 290 2 PLAIN 2 GROOVED 1.063 1.125 2.559 3.622 Cap-1 497 2 PLAIN 2 GROOVED 1.063 1.126 - 2.047 3.22 - Cap-1 448 4 PLAIN 1.063 1.188 - - 2.667 3.624 Cross-1 348 4 PLAIN 1.063 1.188 - - 3.219 3.624 None 355C 2 PLAIN 2 GROOVED 1.064 1.126 - 2.559 3.622 - None 320 2 PLAIN 2 GROOVED 1.078 1.125 2.125 - - 3.22 Cross-1 347 4 GROOVED 1.078 1.125 2.614 2.121 - - Cross-1 375 2 PLAIN 2 GROOVED 1.125 1.125 - 2.563 3.624 - Cross-1 447 2 PLAIN 2 GROOVED 1.125 1.188 2.551 - - 3.622 Cross-1 459 4 PLAIN 1.125 1.189 - - 3.624 3.624 Cross-1 362 2 PLAIN 2 GROOVED 1.188 1.231 - 3.004 4.187 - Cross-1 22UNIVERSAL JOINTS REFERENCE 295 UNIVERSAL JOINTS REFERENCE DI 332 1.561 4.563 Cross-1 900 1.812 5.937 Cross-1 333 1.875 5.307 Cross-1 334 1.937 6.089 Cross-2 376 1.937 7 Cross-2 381 1.937 7.55 Cross-2 388 2.185 8.094 Cross-2 335 2.323 6.592 Cross-1 23UNIVERSAL JOINTS REFERENCE 296 UNIVERSAL JOINTS REFERENCE DO 475 1.875 5.307 Cross-1 875 1.875 5.307 Cross-1 476 1.938 6.089 Cross-2 876 1.938 6.089 Cross-2 477 1.938 7 Cross-2 877 1.938 7 Cross-2 478 1.938 7.55 Cross-2 878 1.938 7.55 Cross-2 24UNIVERSAL JOINTS REFERENCE 297 UNIVERSAL JOINTS REFERENCE Type P 951 4 LWT 3.119 3.119 Cross-1 1.312 952 2 LWT / 2 LWD 3.119 3.119 Cap-1 1.312 994 2 LWT / 2 LWD 3.119 3.119 Cap-1 1.312 967 3.557 3.557 Cross-1 1.437 495 4 LWD 3.557 3.557 Cross-1 1.437 536 4 LWT 3.557 3.557 Cross-1 1.437 535 2 LWT / 2 LWD 3.557 3.557 Cross-1 1.437 966 3.557 3.557 Cross-1 1.437 530 4 LWT 3.557 3.557 Cross-1 1.437 969 4.245 4.245 Cross-1 1.437 549 4 LWD 4.245 4.245 Cross-1 1.437 540 4 LWT 4.245 4.245 Cross-1 1.437 541 2 LWT / 2 LWD 4.245 4.245 Cross-1 1.437 929 4.245 4.245 Cross-1 1.437 996 2 LWT / 2 LWD 4.252 4.252 Cross-1 1.441 968 4.53 4.53 Cross-1 1.688 999 4 LWD 4.53 4.53 Cross-1 1.688 558 4.53 4.53 Cross-1 1.688 550 4 LWT 4.53 4.53 Cross-1 1.688 552 2 LWT / 2 LWD 4.53 4.53 Cross-1 1.688 933 4.53 4.53 Cross-1 1.688 486 5.12 5.12 Cross-1 1.93 895 4 DWT 5.315 5.315 Cross-1 1.937 896 5.315 5.315 Cross-1 1.937 894 5.315 5.315 Cross-1 1.937 905 5.53 5.53 Cross-1 1.688 560 4 LWT 5.53 5.53 Cross-1 1.688 561 2 LWT / 2 LWD 5.53 5.53 Cross-1 1.688 25UNIVERSAL JOINTS REFERENCE 298 UNIVERSAL JOINTS REFERENCE Type P 563 5.53 5.53 Cross-1 1.688 763 5.53 5.53 Cross-1 1.688 568 4 DWT 5.53 5.84 None 1.690 (A) 1.940 (B) 569 5.53 5.84 None 1.690 (A) 1.940 (B) 927 5.842 5.842 Cross-1 1.937 482 5.842 5.842 Cross-4 1.937 575 4 LWD 5.842 5.842 Cross-1 1.937 576 5.842 5.842 Cross-1 1.937 572 2 LWT / 2 LWD 5.842 5.842 Cross-1 1.937 574 5.842 5.842 Cross-1 1.937 570 4 LWT 5.842 5.842 Cross-1 1.938 963 6.496 6.496 Cross-2 2.813 785 4 LWT 6.496 6.496 Cross-1 2.813 928 8.122 8.122 Cross-1 1.938 582 4 LWD 8.122 8.122 Cross-1 1.938 584 4 LWD 8.122 8.122 Cross-1 1.938 581 4 LWT 8.122 8.122 Cross-1 1.938 783 8.122 8.122 Cross-1 1.938 911 8.252 8.252 Cross-1 2.813 793 4 LWT 8.252 8.252 Cross-1 2.813 792 8.252 8.252 Cross-1 2.813 26UNIVERSAL JOINTS REFERENCE 299 UNIVERSAL JOINTS REFERENCE Type Cap Cap Hole CL to DPI 522 2 GROOVED / 2 LWD 1 2.344 3.119 Cap-1 1.312 508 2 GROOVED / 2 LWT 1 2.344 3.126 Cross-1 1.312 998 1.125 2.563 3.557 Cross-1 1.437 531G 2 GROOVED / 2 LWT 1.125 2.563 3.557 Cross-1 1.437 546 2 GROOVED / 2 LWD 1.125 3.25 4.25 Cross-1 1.44 494 1.125 3.251 4.245 Cross-1 1.437 544 2 GROOVED / 2 LWT 1.125 3.251 4.245 Cross-1 1.437 997 1.312 3.122 4.529 Cross-1 1.688 557 1.312 3.319 4.53 Cross-1 1.688 554 2 GROOVED / 2 LWT 1.312 3.319 4.53 Cross-1 1.688 565 1.313 4.32 5.53 Cross-1 1.69 957 2 GROOVED / 2 LWT 1.313 4.32 5.53 Cross-1 1.69 483 1.625 4.22 5.842 Cross-1 1.94 931 1.625 6.625 8.12 Cap-1 1.94 27UNIVERSAL JOINTS REFERENCE 300 UNIVERSAL JOINTS REFERENCE Type Cap Cap Hole D OP 559 1.375 4.185 4.53 Cross-1 1.688 484 1.375 4.96 5.315 Cross-1 1.94 470 1.375 4.965 5.524 Cross-1 1.688 480 1.937 7.55 8.25 Cross-1 2.813 300 UNIVERSAL JOINTS REFERENCE Type Cap Cap Hole D OP 559 1.375 4.185 4.53 Cross-1 1.688 484 1.375 4.96 5.315 Cross-1 1.94 470 1.375 4.965 5.524 Cross-1 1.688 480 1.937 7.55 8.25 Cross-1 2.813 28UNIVERSAL JOINTS REFERENCE 301 UNIVERSAL JOINTS REFERENCE 29UNIVERSAL JOINTS REFERENCE 302 UNIVERSAL JOINTS REFERENCE 30UNIVERSAL JOINTS REFERENCE 303 UNIVERSAL JOINTS REFERENCE 31UNIVERSAL JOINTS REFERENCE 304 UNIVERSAL JOINTS REFERENCE 32UNIVERSAL JOINTS REFERENCE 305 UNIVERSAL JOINTS REFERENCE 33UNIVERSAL JOINTS REFERENCE 306 UNIVERSAL JOINTS REFERENCE 34UNIVERSAL JOINTS REFERENCE 307 UNIVERSAL JOINTS REFERENCE 35UNIVERSAL JOINTS REFERENCE 308 UNIVERSAL JOINTS REFERENCE 36UNIVERSAL JOINTS REFERENCE 309 UNIVERSAL JOINTS REFERENCE 37UNIVERSAL JOINTS REFERENCE 310 UNIVERSAL JOINTS REFERENCE 38UNIVERSAL JOINTS REFERENCE 311 UNIVERSAL JOINTS REFERENCE 39UNIVERSAL JOINTS REFERENCE 312 UNIVERSAL JOINTS REFERENCE see page 7 40UNIVERSAL JOINTS REFERENCE 313 UNIVERSAL JOINTS REFERENCE 41UNIVERSAL JOINTS REFERENCE 314 UNIVERSAL JOINTS REFERENCE 42UNIVERSAL JOINTS REFERENCE 315 UNIVERSAL JOINTS REFERENCE 43UNIVERSAL JOINTS REFERENCE 316 UNIVERSAL JOINTS REFERENCE see page 7 44UNIVERSAL JOINTS REFERENCE 317 UNIVERSAL JOINTS REFERENCE 45UNIVERSAL JOINTS REFERENCE 318 UNIVERSAL JOINTS REFERENCE 46UNIVERSAL JOINTS REFERENCE 319 UNIVERSAL JOINTS REFERENCE (Cont'd.) 47UNIVERSAL JOINTS REFERENCE 320 UNIVERSAL JOINTS REFERENCE see page 7 48UNIVERSAL JOINTS REFERENCE 321 UNIVERSAL JOINTS REFERENCE 49UNIVERSAL JOINTS REFERENCE 322 UNIVERSAL JOINTS REFERENCE 50UNIVERSAL JOINTS REFERENCE 323 UNIVERSAL JOINTS REFERENCE 51UNIVERSAL JOINTS REFERENCE 324 UNIVERSAL JOINTS REFERENCE see page 7 52UNIVERSAL JOINTS REFERENCE 325 UNIVERSAL JOINTS REFERENCE 53UNIVERSAL JOINTS REFERENCE 326 UNIVERSAL JOINTS REFERENCE 54UNIVERSAL JOINTS REFERENCE 327 UNIVERSAL JOINTS REFERENCE see page 7 55UNIVERSAL JOINTS REFERENCE 328 UNIVERSAL JOINTS REFERENCE A 56UNIVERSAL JOINTS REFERENCE 329 UNIVERSAL JOINTS REFERENCE 57UNIVERSAL JOINTS REFERENCE 330 UNIVERSAL JOINTS REFERENCE see page 7 58UNIVERSAL JOINTS REFERENCE 331 UNIVERSAL JOINTS REFERENCE 59UNIVERSAL JOINTS REFERENCE 332 UNIVERSAL JOINTS REFERENCE 60UNIVERSAL JOINTS REFERENCE 333 UNIVERSAL JOINTS REFERENCE 61UNIVERSAL JOINTS REFERENCE 334 UNIVERSAL JOINTS REFERENCE 62UNIVERSAL JOINTS REFERENCE 335 UNIVERSAL JOINTS REFERENCE 63UNIVERSAL JOINTS REFERENCE 336 UNIVERSAL JOINTS REFERENCE 64UNIVERSAL JOINTS REFERENCE 337 UNIVERSAL JOINTS REFERENCE 65UNIVERSAL JOINTS REFERENCE 338 UNIVERSAL JOINTS REFERENCE 66UNIVERSAL JOINTS REFERENCE 339 UNIVERSAL JOINTS REFERENCE 67UNIVERSAL JOINTS REFERENCE 340 UNIVERSAL JOINTS REFERENCE 68UNIVERSAL JOINTS REFERENCE 341 UNIVERSAL JOINTS REFERENCE 69UNIVERSAL JOINTS REFERENCE 342 UNIVERSAL JOINTS REFERENCE 70UNIVERSAL JOINTS REFERENCE 343 UNIVERSAL JOINTS REFERENCE 71UNIVERSAL JOINTS REFERENCE 344 UNIVERSAL JOINTS REFERENCE 72UNIVERSAL JOINTS REFERENCE 345 UNIVERSAL JOINTS REFERENCE 73UNIVERSAL JOINTS REFERENCE 346 UNIVERSAL JOINTS REFERENCE 74UNIVERSAL JOINTS REFERENCE 347 UNIVERSAL JOINTS REFERENCE 75UNIVERSAL JOINTS REFERENCE 348 UNIVERSAL JOINTS REFERENCE 76UNIVERSAL JOINTS REFERENCE 349 UNIVERSAL JOINTS REFERENCE 77UNIVERSAL JOINTS REFERENCE 350 UNIVERSAL JOINTS REFERENCE 78UNIVERSAL JOINTS REFERENCE 351 UNIVERSAL JOINTS REFERENCE 79UNIVERSAL JOINTS REFERENCE 352 UNIVERSAL JOINTS REFERENCE 80UNIVERSAL JOINTS REFERENCE 353 UNIVERSAL JOINTS REFERENCE 81UNIVERSAL JOINTS REFERENCE 354 UNIVERSAL JOINTS REFERENCE 82UNIVERSAL JOINTS REFERENCE 355 UNIVERSAL JOINTS REFERENCE 83UNIVERSAL JOINTS REFERENCE 356 UNIVERSAL JOINTS REFERENCE 84UNIVERSAL JOINTS REFERENCE 357 UNIVERSAL JOINTS REFERENCE 85UNIVERSAL JOINTS REFERENCE 358 UNIVERSAL JOINTS REFERENCE see page 7 86UNIVERSAL JOINTS REFERENCE 359 UNIVERSAL JOINTS REFERENCE 87UNIVERSAL JOINTS REFERENCE 360 UNIVERSAL JOINTS REFERENCE 88UNIVERSAL JOINTS REFERENCE 361 UNIVERSAL JOINTS REFERENCE 89UNIVERSAL JOINTS REFERENCE 362 UNIVERSAL JOINTS REFERENCE 90UNIVERSAL JOINTS REFERENCE 363 UNIVERSAL JOINTS REFERENCE 91UNIVERSAL JOINTS REFERENCE 364 UNIVERSAL JOINTS REFERENCE 92UNIVERSAL JOINTS REFERENCE 365 UNIVERSAL JOINTS REFERENCE 93UNIVERSAL JOINTS REFERENCE 366 UNIVERSAL JOINTS REFERENCE 94UNIVERSAL JOINTS REFERENCE 367 UNIVERSAL JOINTS REFERENCE 95UNIVERSAL JOINTS REFERENCE 368 UNIVERSAL JOINTS REFERENCE 96UNIVERSAL JOINTS REFERENCE 369 UNIVERSAL JOINTS REFERENCE 97UNIVERSAL JOINTS REFERENCE 370 UNIVERSAL JOINTS REFERENCE 98UNIVERSAL JOINTS REFERENCE 371 UNIVERSAL JOINTS REFERENCE 99UNIVERSAL JOINTS REFERENCE 372 UNIVERSAL JOINTS REFERENCE 100UNIVERSAL JOINTS REFERENCE 373 UNIVERSAL JOINTS REFERENCE 101UNIVERSAL JOINTS REFERENCE 374 UNIVERSAL JOINTS REFERENCE 102UNIVERSAL JOINTS REFERENCE 375 UNIVERSAL JOINTS REFERENCE 103UNIVERSAL JOINTS REFERENCE 376 UNIVERSAL JOINTS REFERENCE 104UNIVERSAL JOINTS REFERENCE 377 UNIVERSAL JOINTS REFERENCE 105UNIVERSAL JOINTS REFERENCE 378 UNIVERSAL JOINTS REFERENCE 106UNIVERSAL JOINTS REFERENCE 379 UNIVERSAL JOINTS REFERENCE Ki ts Type Notes 604 606 6 11 Saginaw Saginaw w/o Ball Series Dimension 633 636 637 638 1310 Series Ford 1330 Series Ford 2.5” X .083” 2.0” X .120” 2.0” X .120” 2.5” X .083” Series ID 607 608 609 615 1310 1330 1210 1330 .500” .500” .500” .625” 3.218” 3.622” 2.438” 3.622” Type U-Joint Center Lines Dimension 643 646 647 648 649 Mechanics 2.5 Series Saginaw S-44 Spicer 1310 Spicer 1330 Spicer 1210 2.183” 3.250” 2.688” 2.750” 2.688” Type U-Joint Center Lines Dimension 624 626 627 628C 628F 630F Saginaw S-44 Series 1310 Series Ford 1330 Series Ford 1350 Series Ford Later w/ .513” Stud w/ 3.125” Pilot, w/ Cup Liner installed w/ 2.0” Pilot, .500” ID 3.50” Bolt Circle w/ 3.125” Pilot, .500 ID w/ 2.0” Pilot, .500” ID w/ 2.0” Pilot, .500” ID 4.25” Bolt Circle ID Series 612 613 614 616 617 .500” .467” .513” .625” .500” 609, 627, 608, 607 615 628C, 628F 1330, 1210 Lincoln 1330 Late Design 107UNIVERSAL JOINTS REFERENCE 380 UNIVERSAL JOINTS REFERENCE Contents Bolt Center Straps 318-10 331-10 351-10 360-10 437-10 475-10 476-10 492-10 530-10 1.50” 1.81” 2.12” 1.59” 1.59” 2.50” 2.81” 1.66” 1.81” 1/4”-28 x 5/8” 5/16”-24 x 3/4” 3/8”-24 x 3/4” 5/16”-24 x 1-5/16” 1/4”-28 x 5/8” 3/8”-24 x 1-3/4” 1/2”-20 x 1” 5/16”-24 x 1-5/16” 5/16”-24 x 1-5/16” 4 Type 621 622 Extended 1.5” 1/4”-28 1/8” PTF Pipe threading 329-10 330-10 358-10 534-10 1-1/16” or 1.063” 1-3/16” or 1.375 1-3/8” or 1.125” 1-1/8” or 1.188” 5/16”-24 3/8”-24 7/16”-20 5/16”-18 621 622 108UNIVERSAL JOINTS REFERENCE 381 UNIVERSAL JOINTS REFERENCE U-Joint Fits Strap Kit Fits U-Bolt 231 315G 316 317 319 319 320 320 330 331 331AG 333 334 344 344AG 347 347 348 348 351 351AG 353 354 355 355 358 361 362 365 368 369 371 372 372 374 375 376 377 378 379 381 423 427 428 429 430 430 1.188 1.078 1.125 1.078 1.063 1.078 1.078 1.125 1.188 1.188 1.188 1.875 1.937 1.063 1.063 1.078 1.125 1.063 1.188 1.375 1.375 1.063 1.063 1.063 1.125 1.375 1.063 1.188 1.063 1.063 1.063 1.188 1.063 1.125 1.375 1.125 1.937 1.188 1.063 1.063 1.937 1.188 1.188 1.375 1.063 1.063 1.125 331-10 / 492-10 318-10 530-10 318-10 360-10 / 437-10 318-10 318-10 530-10 331-10 / 492-10 331-10 / 492-10 331-10 / 492-10 475-10 476-10 360-10 / 437-10 360-10 / 437-10 318-10 530-10 360-10 / 437-10 331-10 / 492-10 351-10 351-10 360-10 / 437-10 360-10 / 437-10 360-10 / 437-10 530-10 351-10 360-10 / 437-10 331-10 / 492-10 360-10 / 437-10 360-10 360-10 / 437-10 331-10 / 492-10 360-10 / 437-10 530-10 351-10 530-10 476-10 331-10 / 492-10 360-10 360-10 / 437-10 476-10 331-10 / 492-10 331-10 / 492-10 351-10 360-10 / 437-10 360-10 / 437-10 530-10 330-10 - 534-10 - 329-10 - - 534-10 330-10 330-10 330-10 - - 329-10 329-10 - 534-10 329-10 330-10 358-10 358-10 329-10 329-10 329-10 534-10 358-10 329-10 330-10 329-10 329-10 329-10 330-10 329-10 534-10 358-10 534-10 - 330-10 329-10 329-10 - 330-10 330-10 358-10 329-10 329-10 534-10 109UNIVERSAL JOINTS REFERENCE 382 UNIVERSAL JOINTS REFERENCE U-Joint Fits Strap Kit Fits U-Bolt 431 432 433 434 434 436 437G 446 447 447 448 448 449 449 456 457 457 458 458 461 475 476 477 478 480 484 492 494 497 497 498 505 513 531G 534G 544 545 546 813 815 818 880 882 899 995 998 1.063 1.375 1.063 1.063 1.125 1.063 1.063 1.063 1.125 1.188 1.063 1.188 1.063 1.125 1.188 1.063 1.078 1.063 1.125 1.375 1.875 1.937 1.937 1.937 1.937 1.375 1.125 1.125 1.063 1.125 1.125 1.063 1.125 1.125 1.125 1.125 1.125 1.125 1.063 1.188 1.375 1.125 1.125 1.937 1.063 1.125 360-10 / 437-10 351-10 360-10 / 437-10 360-10 / 437-10 530-10 360-10 / 437-10 360-10 / 437-10 360-10 / 437-10 530-10 331-10 / 492-10 360-10 / 437-10 331-10 / 492-10 360-10 / 437-10 530-10 331-10 / 492-10 360-10 / 437-10 318-10 360-10 / 437-10 530-10 351-10 475-10 476-10 476-10 476-10 476-10 351-10 530-10 530-10 360-10 / 437-10 530-10 530-10 360-10 / 437-10 530-10 530-10 530-10 530-10 530-10 530-10 360-10 / 437-10 331-10 / 492-10 351-10 530-10 530-10 476-10 360-10 / 437-10 530-10 329-10 358-10 329-10 329-10 534-10 329-10 329-10 329-10 534-10 330-10 329-10 330-10 329-10 534-10 330-10 329-10 - 329-10 534-10 358-10 - - - - - 358-10 534-10 534-10 329-10 534-10 534-10 329-10 534-10 534-10 534-10 534-10 534-10 534-10 329-10 330-10 358-10 534-10 534-10 - 329-10 534-10 110UNIVERSAL JOINTS REFERENCE 383 UNIVERSAL JOINTS REFERENCE AC DELCO PRE. AC DELCO PRE.AC DELCO PRE. AC DELCO PRE. ................. 479 .................437G ................... 341 ................... 391 ................... 340 ................... 341 ................... 361 ................... 385 ................... 392 ................... 397 ................... 413 ................... 437 .................514G ................... 240 .................437G ................... 395 ................... 398 ................... 386 ....................411 ................... 412 ................... 331 ................... 371 ................... 434 ................... 354 ................... 369 .................534G ................... 232 ................... 235 ................... 280 ................... 317 ................... 355 ................... 377 ................... 254 ................... 387 .................315G ................... 265 ................... 353 ................... 246 ................... 379 ................... 436 ................... 231 ................... 316 ................... 365 ................... 372 ................... 348 ................... 378 ................... 430 ................... 433 ................... 429 ................... 429 ................... 447 ................... 225 ................... 255 ................... 254 ................... 235 ................... 245 ................... 248 ................... 225 ................... 275 ................... 254 ................... 255 ................... 254 ................... 265 ................... 280 ................... 269 ................... 285 ................... 305 .................315G ................... 369 ................... 429 ................... 375 ................... 396 ................... 431 ................... 446 ................... 449 ................... 459 ................... 492 ................... 497 ................... 498 ................... 505 ................... 507 ................... 508 ................... 507 ................... 285 ................... 290 ................... 319 ................... 344 ................... 347 ................... 380 ................... 384 ................... 389 ................... 390 ................... 393 ................... 394 ................... 399 ................... 429 ................... 448 ................... 450 ................... 455 ................... 457 ................... 458 .................437G ................... 513 ................... 383 ................... 225 ................... 408 ................... 409 ................. 331A ................... 330 ................... 374 ................... 320 .................531G ................... 295 ................... 464 ................. 330A .................231C .................330C .................331C .................354C .................355C .................369C .................372C .................458C .............. 329-10 .............. 318-10 .............. 331-10 .............. 360-10 .............. 437-10 .............. 530-10 .............. 534-10 .............. 330-10 .............. 492-10 ....................611 ................... 612 ................... 613 ................... 614 ................... 616 ................... 620 ................... 621 ................. 626L ................... 617 ................... 622 ................... 610 ................... 606 ................... 604 ................... 609 ................... 607 ................... 615 ................... 608 ................... 626 ................... 648 ................... 624 ................... 633 ................... 636 ................... 637 ................... 638 ................... 647 ................... 648 ................... 649 ................... 627 .................628C ................. 628F ................... 643 ................... 646 ................. 630F ................... 338 ................... 838 ................... 861 ................. 1501 ................. 1501 ................... 838 ................... 423 ................... 461 ................... 351 ................... 304 ................... 362 ................... 382 ................... 427 ................... 428 ................. 351A ................... 560 ................... 460 ................... 895 ................... 896 ................... 332 ................... 359 ................... 560 ................... 563 ................... 334 ................... 333 ................... 376 ................... 476 ................... 477 ................... 475 ................... 570 ................... 574 ................... 335 ................... 568 ................... 569 ................... 875 ................... 876 ................... 877 ................... 462 ................... 358 ................... 370 ................... 432 ................... 424 ................... 381 ................... 478 ................... 480 ................... 581 ................... 783 ................... 878 .............. 476-10 .............. 351-10 .............. 358-10 .............. 475-10 ................. 1588 ................. 1780 ................. 1513 ................. 1517 ................. 1518 ................. 1519 ................. 1521 ................. 1522 ................. 1521 ................. 1526 ................. 1529 ................. 1530 ................. 1535 ................. 1537 ................. 1540 ................. 1545 ................. 1546 ................. 1548 ................. 1575 ................. 1703 ................. 1224 ................. 1392 ................. 1398 ................. 1780 ................. 1750 ................. 1751 ................. 1752 ................. 1754 ................. 1755 ................. 1756 ................. 1765 111UNIVERSAL JOINTS REFERENCE 384 UNIVERSAL JOINTS REFERENCE ................. 1780 ................. 1577 ................. 1581 ................... 410 ................... 983 ................... 451 ................... 452 ................... 951 ................... 456 ................... 522 ................ 832M .................351R ................... 994 ................... 471 ................... 495 ................... 536 ................... 535 ................... 536 ................... 890 ................... 966 ................... 967 ................... 998 ................... 905 ................... 550 ................... 563 ................... 968 ................... 470 ................... 474 ................... 905 ................... 484 ................... 486 ................... 552 ................... 554 ................... 557 ................... 558 ................... 561 ................... 565 ................... 567 ................... 892 ................... 894 ................... 898 ................... 899 ................... 933 ................... 957 ................... 958 ................... 997 ................... 999 ................... 559 ................. 927B ................... 928 ................... 482 ................... 483 ................... 572 ................... 575 ................... 576 ................... 785 ................... 893 ................... 900 ................... 923 ................... 963 ................... 540 ................... 494 210-0160 .................. 330 210-0170 .................. 338 210-0178 .................. 331 210-0213 .................. 354 210-0248 .................. 361 210-0260 .................. 365 210-0278 .................. 379 210-0297 .................. 371 210-0315 .................. 437 210-0332 .................. 374 210-0350 .................. 368 210-0443 ................437G 210-0445 .................. 445 210-0447 .................. 231 210-0455 .................. 455 210-0456 .................. 436 210-0464 .................. 464 210-1200 .................. 429 210-1201 .................. 430 210-1202 .................. 431 210-1203 .................. 433 210-1204 .................. 434 210-1205 .................. 423 210-1206 .................. 427 210-1210 .................. 432 210-1214 .................. 428 210-1300 .................. 305 210-1301 .................. 304 210-1306 ................315G 210-1309 .................. 316 210-1557 .................. 479 210-2011 ................... 507 210-2031 .................. 508 210-2033 .................. 522 210-2140 .................. 505 210-2173 .................. 498 210-2500 .................. 513 210-2530 .................. 497 210-3008 .................. 492 210-3105 ................534G 210-3117 ................... 535 211-0160 ................. 330A 211-0170 ................... 838 211-0178 ................. 331A 211-1306 ................... 317 213-1306 ............... 832M 214-0017 .................. 287 214-0443 .................. 237 214-1200 .................. 229 214-1203 .................. 233 214-3105 .................. 234 215-0021 .................. 285 215-0134 .................. 275 215-0153 .................. 280 215-0160 .................. 295 215-0160 ................ 295A 215-0178 .................. 232 215-0178 ................ 232A 215-0213 .................. 345 215-0269 .................. 378 215-0278 .................. 269 215-0299 .................. 377 215-0354 .................. 270 215-0443 .................. 240 215-1200 .................. 225 215-1200 .................. 250 215-1201 .................. 255 215-1203 .................. 254 215-1203 .................. 260 215-1204 .................. 265 215-1306 .................. 245 215-1307 .................. 246 215-1309 .................. 248 215-3105 .................. 235 215-4009 .................. 290 218-0153 .................. 380 218-0443 .................. 466 218-1306 .................. 315 219-0153 ................369C 219-0160 ................330C 219-0178 ................331C 219-0231 ................355C 219-0356 ................372C 219-0359 ................458C 219-0447 ................231C 219-1203 ................354C 219-3105 ................351C 220-0002 .................. 410 220-0006 .................. 384 220-0007 .................. 397 220-0009 .................. 386 220-0010 .................. 385 220-0011 ................... 395 220-0012 .................. 390 220-0013 .................. 394 220-0014 .................. 396 220-0020 .................. 389 220-0021 .................. 387 220-0027 .................. 391 220-0028 .................. 392 220-0029 .................. 393 220-0046 .................. 446 220-0052 .................. 383 220-0062 .................. 461 220-0064 .................. 462 220-0066 .................. 382 220-0081 .................. 398 220-0088 .................. 399 220-0093 .................. 450 220-0410 .................. 413 220-0411 ....................411 220-0412 .................. 412 220-0456 .................. 456 220-0500 .................. 341 220-0500 .............. 341BL 220-0501 .................. 340 220-1100 ................... 344 220-1501 .................. 983 220-3500 .................. 370 220-7410 .................. 408 222-1948 .................. 405 230-0004 .................. 890 230-0006 .................. 892 230-0007 .................. 893 ................... 541 ................... 544 ................... 545 ................... 546 ................... 549 ................... 929 ................... 969 ................... 996 ....................911 ................... 582 ................... 584 ................... 792 ................... 793 ................... 931 ................... 932 ................... 388 ................... 995 ................... 861 ....................811 ................... 812 ................... 839 ................... 840 .............. 341AG ................... 880 ................... 964 .............. 344AG .............. 331AG ................... 815 ................... 934 ................... 813 ................... 810 ................... 853 ................... 856 ................... 870 ................... 882 ................... 814 ................... 888 .............. 351AG ................... 816 ................... 817 ................... 818 ................... 889 ................... 819 ................... 821 ................. 1086 ................... 507 ................. 1924 ................. 1936 ................. 1223 ................. 1305 ................. 1843 ................. 1566 ................. 1782 ................. 1076 ................. 1877 210-0006 .................. 821 210-0105 ................514G 210-0134 .................. 353 210-0153 .................. 369 AC DELCO PRE.AC DELCO PRE. GMB PRE. GMB PRE. GMB PRE. 112UNIVERSAL JOINTS REFERENCE 385 UNIVERSAL JOINTS REFERENCE 230-0075 .................. 898 230-0085 .................. 899 230-0115 ................... 332 230-0124 .................. 335 230-0155 .................. 358 230-0155 ................358R 230-0165 .................. 359 230-0170 .................. 578 230-0188 .................. 351 230-0250 .................. 579 230-0279 .................. 333 230-0280 .................. 334 230-0281 .................. 381 230-0308 .................. 388 230-0328 .................. 484 230-0407 .................. 376 230-0409 .................. 409 230-0424 .................. 424 230-0451 .................. 451 230-0471 .................. 471 230-0486 .................. 486 230-0558 .................. 475 230-0560 .................. 476 230-0562 .................. 478 230-0674 .................. 875 230-0675 .................. 876 230-0676 .................. 878 230-0677 .................. 877 230-0814 .................. 477 230-0900 .................. 900 230-0931 .................. 931 230-0957 .................. 957 230-0998 .................. 998 230-1555 ................ 358A 230-1880 .................. 932 230-2002 .................. 951 230-2116 ................... 452 230-2117 ................... 994 230-3000 .................. 536 230-3001 .................. 530 230-3012 ................531G 230-3020 .................. 495 230-3143 .................. 967 230-3158 .................. 966 230-4002 .................. 540 230-4014 .................. 544 230-4015 .................. 545 230-4016 .................. 546 230-4104 .................. 549 230-4110 ................... 929 230-4140 .................. 541 230-4141 .................. 996 230-4143 .................. 969 230-4156 .................. 494 230-5000 .................. 550 230-5008 .................. 554 230-5015 .................. 557 230-5109 .................. 958 230-5121 .................. 552 230-5148 .................. 999 230-5150 .................. 558 230-5154 .................. 997 230-5173 .................. 933 230-5177 .................. 968 230-5800 .................. 894 230-5801 .................. 895 230-5802 .................. 896 230-6000 .................. 560 230-6008 .................. 567 230-6016 .................. 565 230-6101 .................. 561 230-6102 .................. 563 230-6106 .................. 905 230-6108 .................. 568 230-7000 .................. 570 230-7008 .................. 923 230-7015 .................. 483 230-7105 ................ 927B 230-7202 .................. 574 230-7203 .................. 575 230-7204 .................. 576 230-7206 .................. 572 230-7569 .................. 569 230-7705 .................. 482 230-8105 .................. 928 230-8200 .................. 581 230-8200 .................. 781 230-8201 .................. 582 230-8202 .................. 783 230-8202 .................. 583 230-8203 .................. 584 230-8500 .................. 785 230-8502 .................. 963 230-9000 .................. 793 230-9001 ...................911 230-9017 .................. 792 231-0188 ................ 351A 231-6012 .................. 763 240-0220 .................. 474 240-0221 .................. 470 240-0231 .................. 355 240-0324 .................. 480 240-0347 .................. 559 240-0353 .................. 319 240-0354 .................. 449 240-0356 .................. 372 240-0358 .................. 348 240-0359 .................. 458 240-0362 .................. 375 240-0369 .................. 347 240-0447 .................. 447 240-0448 .................. 448 240-0457 .................. 457 240-0459 .................. 459 240-0460 .................. 460 240-0840 .................. 840 240-1201 .................. 320 240-1301 .................. 362 250-0030 ...................811 250-0040 .................. 812 250-0050 ............. 341AG 250-0070 .................. 813 250-0080 ............. 344AG 250-0110 ................... 815 250-0120 ............. 331AG 250-0140 .................. 814 250-0150 .................. 816 250-0170 ............. 351AG 250-0200 .................. 817 250-0264 .................. 853 250-0265 .................. 856 250-0600 .................. 861 250-0601 .................. 839 250-0810 .................. 810 250-0818 .................. 818 250-0819 .................. 819 250-0870 .................. 870 250-1200 .................. 995 250-1400 .................. 880 250-1401 .................. 882 250-3500 .................. 964 250-3501 .................. 934 250-4400 .................. 888 250-5500 .................. 889 251-0630 ................ 630F 251-1000 ................ 1000 251-1002 ................ 1002 251-1004 ................ 1004 251-1006 ................ 1006 251-1008 ................ 1008 251-1009 ................ 1009 251-1010 ................ 1010 251-1011 ..................1011 251-1012 ................ 1012 251-1013 ................ 1013 251-1016 ................ 1016 251-1020 ................ 1020 251-1021 ................ 1021 251-1022 ................ 1022 251-1023 ................ 1023 251-1024 ................ 1024 251-1026 ................ 1026 251-1027 ................ 1027 251-1028 ................ 1028 251-1033 ................ 1033 251-1034 ................ 1034 251-1035 ................ 1035 251-1036 ................ 1036 251-1037 ................ 1037 251-1041 ................ 1041 251-1042 ................ 1042 251-1043 ................ 1043 251-1044 ................ 1044 251-1045 ................ 1045 251-1046 ................ 1046 251-1047 ................ 1047 251-1048 ................ 1048 251-1051 ................ 1051 251-1052 ................ 1052 251-1053 ................ 1053 251-1054 ................ 1054 251-1055 ................ 1055 251-1056 ................ 1056 251-1057 ................ 1057 251-1058 ................ 1058 251-1061 ................ 1061 251-1062 ................ 1062 251-1064 ................ 1064 251-1065 ................ 1065 251-1067 ................ 1067 251-1071 ................ 1071 251-1072 ................ 1072 251-1073 ................ 1073 251-1075 ................ 1075 251-1076 ................ 1076 251-1078 ................ 1078 251-1081 ................ 1081 251-1082 ................ 1082 251-1083 ................ 1083 251-1084 ................ 1084 251-1085 ................ 1085 251-1086 ................ 1086 251-1087 ................ 1087 251-1088 ................ 1088 251-1089 ................ 1089 251-1106 ..................1106 251-1119 ..................1119 251-1120 ..................1120 251-1121 ..................1121 251-1122 ..................1122 251-1124 ..................1124 251-1126 ..................1126 251-1128 ..................1128 251-1132 ..................1132 251-1148 ..................1148 251-1149 ..................1149 251-1154 ..................1154 251-1155 ..................1155 251-1164 ..................1164 251-1174 ..................1174 251-1177 ..................1177 251-1182 ..................1182 251-1187 ..................1187 251-1190 ..................1190 251-1194 ..................1194 251-1200 ................ 1200 251-1201 ................ 1201 251-1203 ................ 1203 251-1206 ................ 1206 251-1209 ................ 1209 251-1211 ..................1211 251-1213 ................ 1213 251-1214 ................ 1214 251-1216 ................ 1216 251-1217 ................ 1217 251-1219 ................ 1219 251-1221 ................ 1221 251-1223 ................ 1223 251-1224 ................ 1224 251-1226 ................ 1226 251-1227 ................ 1227 251-1229 ................ 1229 251-1230 ................ 1230 251-1231 ................ 1231 251-1241 ................ 1241 251-1242 ................ 1242 251-1243 ................ 1243 251-1244 ................ 1244 GMB PRE. GMB PRE. GMB PRE. GMB PRE. 113UNIVERSAL JOINTS REFERENCE 386 UNIVERSAL JOINTS REFERENCE 251-1245 ................ 1245 251-1246 ................ 1246 251-1247 ................ 1247 251-1248 ................ 1248 251-1249 ................ 1249 251-1254 ................ 1254 251-1257 ................ 1257 251-1258 ................ 1258 251-1259 ................ 1259 251-1263 ................ 1263 251-1264 ................ 1264 251-1265 ................ 1265 251-1266 ................ 1266 251-1267 ................ 1267 251-1272 ................ 1272 251-1275 ................ 1275 251-1277 ................ 1277 251-1287 ................ 1287 251-1291 ................ 1291 251-1293 ................ 1293 251-1294 ................ 1294 251-1300 ................ 1300 251-1305 ................ 1305 251-1309 ................ 1309 251-1310 ................ 1310 251-1311 ..................1311 251-1312 ................ 1312 251-1313 ................ 1313 251-1314 ................ 1314 251-1315 ................ 1315 251-1317 ................ 1317 251-1319 ................ 1319 251-1320 ................ 1320 251-1321 ................ 1321 251-1322 ................ 1322 251-1323 ................ 1323 251-1325 ................ 1325 251-1326 ................ 1326 251-1347 ................ 1347 251-1348 ................ 1348 251-1349 ................ 1349 251-1351 ................ 1351 251-1352 ................ 1352 251-1353 ................ 1353 251-1366 ................ 1366 251-1367 ................ 1367 251-1372 ................ 1372 251-1373 ................ 1373 251-1374 ................ 1374 251-1375 ................ 1375 251-1387 ................ 1387 251-1389 ................ 1389 251-1390 ................ 1390 251-1392 ................ 1392 251-1395 ................ 1395 251-1396 ................ 1396 251-1397 ................ 1397 251-1398 ................ 1398 251-1406 ................ 1406 251-1408 ................ 1408 251-1412 ................ 1412 251-1414 ................ 1414 251-1426 ................ 1426 251-1432 ................ 1432 251-1442 ................ 1442 251-1447 ................ 1447 251-1448 ................ 1448 251-1449 ................ 1449 251-1450 ................ 1450 251-1452 ................ 1452 251-1453 ................ 1453 251-1454 ................ 1454 251-1455 ................ 1455 251-1457 ................ 1457 251-1460 ................ 1460 251-1461 ................ 1461 251-1464 ................ 1464 251-1470 ................ 1470 251-1472 ................ 1472 251-1473 ................ 1473 251-1474 ................ 1474 251-1475 ................ 1475 251-1482 ................ 1482 251-1485 ................ 1485 251-1492 ................ 1492 251-1500 ................ 1501 251-1503 ................ 1503 251-1504 ................ 1504 251-1505 ................ 1505 251-1507 ................ 1507 251-1509 ................ 1509 251-1510 ................ 1510 251-1512 ................ 1512 251-1513 ................ 1513 251-1516 ................ 1516 251-1517 ................ 1517 251-1518 ................ 1518 251-1519 ................ 1519 251-1520 ................ 1520 251-1521 ................ 1521 251-1522 ................ 1522 251-1523 ................ 1523 251-1525 ................ 1525 251-1526 ................ 1526 251-1527 ................ 1527 251-1529 ................ 1529 251-1530 ................ 1530 251-1531 ................ 1531 251-1532 ................ 1532 251-1534 ................ 1534 251-1535 ................ 1535 251-1537 ................ 1537 251-1539 ................ 1539 251-1540 ................ 1540 251-1545 ................ 1545 251-1546 ................ 1546 251-1548 ................ 1548 251-1550 ................ 1550 251-1552 ................ 1552 251-1553 ................ 1553 251-1558 ................ 1558 251-1559 ................ 1559 251-1560 ................ 1560 251-1566 ................ 1566 251-1567 ................ 1567 251-1570 ................ 1570 251-1571 ................ 1571 251-1572 ................ 1572 251-1573 ................ 1573 251-1574 ................ 1574 251-1575 ................ 1575 251-1576 ................ 1576 251-1577 ................ 1577 251-1579 ................ 1579 251-1581 ................ 1581 251-1582 ................ 1582 251-1583 ................ 1583 251-1585 ................ 1585 251-1587 ................ 1587 251-1588 ................ 1588 251-1589 ................ 1589 251-1591 ................ 1591 251-1592 ................ 1592 251-1593 ................ 1593 251-1594 ................ 1594 251-1595 ................ 1595 251-1596 ................ 1596 251-1597 ................ 1597 251-1600 ................ 1600 251-1610 ................ 1610 251-1612 ................ 1612 251-1613 ................ 1613 251-1614 ................ 1614 251-1616 ................ 1616 251-1620 ................ 1620 251-1624 ................ 1624 251-1627 ................ 1627 251-1630 ................ 1630 251-1631 ................ 1631 251-1635 ................ 1635 251-1636 ................ 1636 251-1641 ................ 1641 251-1642 ................ 1642 251-1643 ................ 1643 251-1644 ................ 1644 251-1646 ................ 1646 251-1647 ................ 1647 251-1651 ................ 1651 251-1652 ................ 1652 251-1653 ................ 1653 251-1654 ................ 1654 251-1657 ................ 1657 251-1661 ................ 1661 251-1662 ................ 1662 251-1666 ................ 1666 251-1667 ................ 1667 251-1671 ................ 1671 251-1672 ................ 1672 251-1676 ................ 1676 251-1677 ................ 1677 251-1700 ................ 1700 251-1703 ................ 1703 251-1705 ................ 1705 251-1708 ................ 1708 251-1750 ................ 1750 251-1751 ................ 1751 251-1752 ................ 1752 251-1754 ................ 1754 251-1755 ................ 1755 251-1756 ................ 1756 251-1759 ................ 1759 251-1760 ................ 1760 251-1761 ................ 1761 251-1763 ................ 1763 251-1765 ................ 1765 251-1766 ................ 1766 251-1769 ................ 1769 251-1772 ................ 1772 251-1780 ................ 1780 251-1782 ................ 1782 251-1784 ................ 1784 251-1800 ................ 1800 251-1801 ................ 1801 251-1803 ................ 1803 251-1806 ................ 1806 251-1810 ................ 1810 251-1811 ..................1811 251-1812 ................ 1812 251-1814 ................ 1814 251-1815 ................ 1815 251-1816 ................ 1816 251-1820 ................ 1820 251-1825 ................ 1825 251-1826 ................ 1826 251-1827 ................ 1827 251-1841 ................ 1841 251-1842 ................ 1842 251-1843 ................ 1843 251-1847 ................ 1847 251-1848 ................ 1848 251-1849 ................ 1849 251-1852 ................ 1852 251-1853 ................ 1853 251-1854 ................ 1854 251-1855 ................ 1855 251-1856 ................ 1856 251-1857 ................ 1857 251-1864 ................ 1864 251-1865 ................ 1865 251-1870 ................ 1870 251-1871 ................ 1871 251-1877 ................ 1877 251-1882 ................ 1882 251-1887 ................ 1887 251-1890 ................ 1890 251-1911 ..................1911 251-1913 ................ 1913 251-1916 ................ 1916 251-1921 ................ 1921 251-1923 ................ 1923 251-1924 ................ 1924 251-1925 ................ 1925 251-1926 ................ 1926 251-1927 ................ 1927 251-1932 ................ 1930 251-1935 ................ 1935 251-1936 ................ 1936 251-1947 ................ 1947 GMB PRE. GMB PRE. GMB PRE. GMB PRE. 114UNIVERSAL JOINTS REFERENCE 387 UNIVERSAL JOINTS REFERENCE MCQUAY NORRIS PRE. MCQUAY NORRIS PRE. MCQUAY NORRIS PRE. 251-1948 ................ 1948 251-1949 ................ 1949 251-1952 ................ 1952 251-1953 ................ 1953 251-1954 ................ 1954 251-1955 ................ 1955 251-1956 ................ 1956 251-1957 ................ 1957 251-1961 ................ 1961 251-1977 ................ 1977 251-1987 ................ 1987 253-1004 ................ 2033 253-1046 ................ 2039 260-0121 ............. 329-10 260-0153 ............. 360-10 260-0155 ............. 358-10 260-0160 ............. 331-10 260-0178 ............. 330-10 260-0180 .................. 609 260-0188 ............. 351-10 260-0266 ............. 318-10 260-0267 ............. 316-10 260-0279 ............. 475-10 260-0280 ............. 476-10 260-0358 ................351R 260-0443 ............. 437-10 260-0624 .................. 624 260-0626 .................. 626 260-0627 .................. 627 260-0628 ................628C 260-0633 .................. 633 260-0636 .................. 636 260-0637 .................. 637 260-0638 .................. 638 260-0643 .................. 643 260-0646 .................. 646 260-0647 .................. 647 260-0648 .................. 648 260-0649 .................. 649 260-0779 .................. 608 260-0782 .................. 607 260-0878 .................. 610 260-1100 ................... 604 260-1200 .................. 606 260-1204 ............. 534-10 260-1628 ................ 628F 260-4105 ............. 530-10 260-4178 ............. 492-10 261-0611 ....................611 261-0612 .................. 612 261-0613 .................. 613 261-0614 .................. 614 261-0615 .................. 615 261-0616 .................. 616 261-0617 .................. 617 261-0626L .............. 626L 262-0620 .................. 620 262-0621 .................. 621 262-0622 .................. 622 ................. 812 .......................514G ......................... 838 ...................... 341 ......................... 332 ....................... 429 ................. 225 ....................... 430 ................. 255 ....................... 354 ................. 254 .................... 433 ....................... 434 ................. 265 ....................... 423 ....................... 427 ....................... 428 ......................... 335 ......................... 880 ....................... 304 .................... 317 ................. 245 ....................... 316 ................. 248 ....................... 375 ....................... 459 ......................... 353 ....................... 392 ....................... 391 ....................... 394 ....................... 398 ....................... 397 ....................... 393 ................. 285 ....................... 513 ....................... 450 .....................411 .................... 408 ......................... 369 ................... 280 ......................... 358 ..................514G ......................... 330 ....................... 464 ......................... 359 ......................... 338 ....................... 838 ...................... 331 .................... 507 ......................... 351 ......................... 369 ....................... 507 ....................... 508 ....................... 452 ......................... 355 ................... 290 .................. 816 ....................... 505 ....................... 498 ......................... 964 ....................... 934 ......................... 361 1-0001 ...................... 853 1-0003 ...................... 856 1-0005 ...................... 344 1-0011 ....................... 395 1-0012 ...................... 390 1-0013 ...................... 394 1-0014 ...................... 396 1-0019 ................. 331-10 1-0020 ................. 492-10 1-0021 ................. 351-10 1-0022 ................. 437-10 1-0024 ................. 360-10 1-0025 ................. 530-10 1-0026 ...................... 341 1-0027 ...................... 391 1-0028 ...................... 392 1-0029 ...................... 393 1-0045 ................. 475-10 1-0046 ................. 476-10 1-0061 ...................... 983 1-0089 ................. 329-10 1-0099 ................. 330-10 1-0103 ...................... 338 1-0105 ....................514G 1-0109 ................. 358-10 1-0121 .......................811 1-0134 ...................... 353 1-0150 ...................... 372 1-0153 ...................... 369 1-0170 ...................... 338 1-0170NPL ............... 338 1-0171 ...................... 838 1-0172 ...................... 338 1-0172 .................... 1501 1-0174 ...................... 365 ......................... 365 ...................... 378 ......................... 333 ......................... 334 ......................... 371 .....................531G ......................... 388 ................ 817 .....................534G .................... 235 ................. 235 .................... 966 ....................... 447 ......................... 429 ................... 225 ......................... 458 ......................... 362 ............................. 344 ....................... 540 ....................... 544 ......................811 ................ 341AG ................ 331AG ..................... 818 ................ 351AG ..................... 819 .................... 541 ....................... 969 ......................... 840 ................... 240 ...................... 429 ....................331C ...................... 446 .......................369C ....................... 550 ....................... 554 ....................... 552 ....................... 968 .......................354C ......................... 347 .................... 455 .......................355C ....................372C ......................... 460 ....................... 894 ....................... 560 ....................... 563 ....................... 905 .................... 957 ....................... 568 ....................... 569 .................... 567 ........................ 983 .......................458C .................330C ......................... 875 ......................... 876 ......................... 878 ......................... 877 ....................... 570 ..................... 927B ......................... 457 ....................... 574 ....................... 928 ....................... 581 ....................... 783 ....................... 785 ....................... 793 ........................911 ....................... 604 ....................... 606 ....................... 612 ................ 617 ........................... 861 .................. 358-10 .................. 330-10 .................. 534-10 .................. 475-10 .................. 476-10 .................. 331-10 .................. 351-10 .................. 437-10 .................. 492-10 .................. 360-10 .................. 318-10 .................. 530-10 GMB PRE. NEAPCO PRE. 115UNIVERSAL JOINTS REFERENCE 388 UNIVERSAL JOINTS REFERENCE 1-0175 ...................... 378 1-0189 ................. 534-10 1-0200 ...................... 369 1-0221 ................. 341AG 1-0248 ...................... 361 1-0278 ...................... 379 1-0298 ...................... 377 1-0300 ...................... 341 1-0301 ...................... 340 1-0315 ...................... 437 1-0321 ...................... 813 1-0421 ................. 344AG 1-0439 ...................... 409 1-0443 ...................... 466 1-0449 ...................... 446 1-0505 .................... 1501 1-0506 ...................... 338 1-0605 ...................... 338 1-0606 ...................... 338 1-0616 ...................... 840 1-0626 ....................369C 1-0675 ...................... 338 1-0676 ...................... 338 1-0677 ...................... 838 1-0718 ...................... 429 1-0719 ...................... 372 1-1001 ...................... 812 1-1103 ....................... 813 1-1200 ...................... 369 1-1275 ...................... 995 1-1276 ...................... 995 1-1475 ...................... 861 1-1516 ...................... 399 1-1555 ....................514G 1-1557 ...................... 398 1-1604 ...................... 385 1-1606 ...................... 397 1-1608 ...................... 386 1-1610 ...................... 384 1-1875 ...................... 507 1-1876 ...................... 507 1-200 ........................ 369 1-2000 ................. 341AG 1-2075 ...................... 880 1-2100 ................. 344AG 1-2134 ...................... 508 1-2171 ...................... 951 1-2173 ...................... 498 1-2185 ...................... 452 1-2186 ...................... 994 1-3600 ...................... 507 1-3650 ...................... 505 1-4635 ...................... 430 1-5800 ...................... 513 1-5900 ...................... 429 1-6300 ...................... 317 1-6301 ....................315G 10-0323 .................. 1751 10-0333 .................. 1752 10-0383 .................. 1754 10-0412 .................. 1537 10-0423 .................. 1535 10-0431 .................. 1545 10-0432 .................. 1540 10-0433 .................. 1517 10-0443 .................. 1513 10-0453 .................. 1546 10-0463 .................. 1518 10-0473 .................. 1519 10-0483 .................. 1548 10-0493 .................. 1522 10-1703 .................. 1703 10-1765 .................. 1765 10-3163 .................. 1756 10-3183 .................. 1755 10-4113 ................... 1526 10-4123 .................. 1530 10-4139 .................. 1566 10-4141 .................. 1566 10-4173 .................. 1513 10-4193 .................. 1529 10-4453 .................. 1513 10-4493 .................. 1521 10-4573 .................. 1521 10-4703 .................. 1703 11-1075 ................... 1780 11-1753 ................... 1780 11-2702 ................... 1780 12-1139 ................... 1224 12-1169 ................... 1224 15-5101 .................. 1566 15-5112 ................... 1513 15-5114 ................... 1519 15-5115 ................... 1521 15-5116 ................... 1526 15-5118 ................... 1529 15-5124 .................. 1522 15-5125 .................. 1530 15-5136 .................. 1546 15-5139 .................. 1548 15-5157 .................. 1751 15-5164 .................. 1521 15-5169 .................. 1765 15-5172 .................. 1540 15-5183 .................. 1750 15-5184 .................. 1752 15-5186 .................. 1754 15-5187 .................. 1545 15-5189 .................. 1537 15-5197 .................. 1526 15-5199 .................. 1755 15-5218 .................. 1575 15-5314 .................. 1513 15-5315 .................. 1518 15-5319 .................. 1535 15-5338 .................. 1756 15-5347 .................. 1703 16-6129 .................. 1936 16-6215 .................. 1924 2-0020 ...................... 389 2-0052 ...................... 331 2-0053 ...................... 331 2-0054 ...................... 330 2-0151 ...................... 450 2-0317 .......................411 2-0350 ...................... 507 2-0355 ...................... 458 2-0382 ...................... 408 2-0383 ...................... 383 2-0456 ...................... 436 2-0506 ...................... 386 2-0521 ...................... 815 2-0527 ...................... 347 2-0599 ...................... 457 2-0617 ...................... 231 2-0631 ....................354C 2-0641G..................330C 2-1153 ....................... 447 2-1175 ....................... 316 2-1200 ...................... 816 2-1203 ...................... 433 2-1355 .................... 331A 2-1400 ...................... 305 2-1569 ...................... 355 2-2157 ...................... 508 2-2169 ...................... 522 2-2200 ................. 331AG 2-2212 ...................... 994 2-2230 ...................... 452 2-2275 ...................... 964 2-2276 ...................... 934 2-2421 ...................... 814 2-2475 ...................... 890 2-2518 ...................... 497 2-2521 ...................... 817 2-2600 ...................... 545 2-2700 ...................... 522 2-2800 ...................... 546 2-3010 ....................534G 2-3011 .....................534G 2-3049 ...................... 375 2-3050 ...................... 448 2-3100 ...................... 319 2-3102 ....................531G 2-3111 ....................... 492 2-3190 ...................... 362 2-3500 ...................... 508 2-4801 ...................... 354 2-4805 ...................... 354 2-4900 ...................... 434 2-4953 ...................... 459 2-6200 ...................... 423 2-6302 ....................315G 2-6600 ...................... 427 2-9201 ...................... 604 2-9301 ...................... 606 2-9302 ...................... 606 22-1330 .................. 1843 2858WB-1................. 895 2858WB-2................. 896 2868WB-10............... 574 2868WB-9................. 570 2878WB-13............... 581 2878WB-14............... 783 2888WB-10............... 792 2888WB-9................. 793 3-0044 ...................... 888 3-0045 ...................... 889 3-0055 ...................... 332 3-0056 ...................... 304 3-0155 ...................... 358 3-0188 ...................... 351 3-0261 ................. 331AG 3-0332 ...................... 374 3-0415 .................... 330A 3-0485 ...................... 464 3-0621 ................. 331AG 3-0721 ...................... 818 3-0803 ...................... 351 3-0808 ...................... 358 3-0821 ................. 351AG 3-0921 ...................... 819 3-1045 ...................... 890 3-1053 ...................... 331 3-1054 ...................... 330 3-1557 ...................... 479 3-2521 ...................... 817 3-3130 ...................... 372 3-3131 ...................... 449 3-3140 ...................... 348 3-3152 ...................... 536 3-3154 ...................... 998 3-3155 ...................... 967 3-3158 ...................... 966 3-3190 ...................... 362 3-3202 ....................531G 3-4123 ...................... 541 3-4138 ...................... 540 3-4140 ...................... 929 3-4143 ...................... 969 3-4152 ...................... 544 3-5132 ...................... 554 3-6700 ...................... 428 3-6800 ...................... 432 4-0058 ...................... 333 4-0060 ...................... 892 4-0165 ...................... 359 4-0279 ...................... 333 4-0614 ...................... 563 4-0628 ...................... 905 4-0643 ...................... 560 4-0674 ...................... 875 4-1058 ...................... 889 4-1090 ...................... 460 4-2791 ...................... 475 4-5122 ...................... 550 4-5127 ...................... 552 4-5173 ...................... 933 4-5177 ...................... 968 4-5262 ...................... 968 4-5800 ...................... 894 4-5801 ...................... 895 4-5802 ...................... 896 4-6103 ...................... 563 4-6107 ...................... 957 4-6114 ....................... 563 4-6123 ...................... 567 4-6128 ...................... 905 NEAPCO PRE.NEAPCO PRE.NEAPCO PRE.NEAPCO PRE. 116UNIVERSAL JOINTS REFERENCE 389 UNIVERSAL JOINTS REFERENCE 4-6143 ...................... 560 4-6152 ...................... 561 4-6162 ...................... 568 4-6163 ...................... 569 4-6937 ...................... 905 5-0059 ...................... 334 5-0070 ...................... 893 5-0280 ...................... 334 5-0284 ...................... 334 5-0589 ...................... 333 5-0725 ...................... 570 5-0727 ...................... 574 5-2801 ...................... 476 5-7126 .................... 927B 5-7205 ...................... 570 5-7206 ...................... 572 5-7207 ...................... 574 5-7208 ...................... 575 5-7209 ...................... 576 5-7956 .................... 927B 5-8113 ....................... 928 50-1080 .................. 1086 50-2502 .................. 1588 6-0124 ...................... 335 6-0185 ...................... 932 6-0226 ...................... 335 6-0281 ...................... 381 6-0308 ...................... 388 6-0324 ...................... 480 6-0407 ...................... 376 6-0675 ...................... 876 6-0676 ...................... 878 6-0677 ...................... 477 6-0825 ...................... 581 6-0916 .......................911 6-0917 ...................... 792 6-1170 ....................... 578 6-2811 ....................... 478 6-4071 ...................... 478 6-8113 ....................... 928 6-8205 ...................... 581 6-8206 ...................... 582 6-8207 ...................... 783 6-8208 ...................... 584 6-8500 ...................... 785 6-8514 ...................... 785 6-8957 ...................... 928 6-9014 ...................... 793 6-9016 .......................911 6-9017 ...................... 792 6-9500 .......................911 7-0041 ...................... 615 7-0042 ...................... 609 7-0079 ...................... 608 7-0079NG ................. 608 7-0081 ...................... 612 7-0081NG ................. 617 7-0082 ...................... 607 7-0082NG ................. 607 7-0407 ...................... 613 7-0409 ...................... 614 70-0704 .................. 1076 041662...................... 331 050021000................ 522 050138000................ 905 1-4-2493 ................. 1703 1-4-3093 ................. 1223 10-3-13X ................. 1750 10-3-163X ............... 1756 10-3-183X ............... 1755 10-3-18KX .............. 1782 10-3-23X ................. 1751 10-3-33X ................. 1752 10-3-51X ................. 1765 10-3-83X ................. 1754 10-4-1101X ............. 1566 10-4-113 ................. 1526 10-4-12 ................... 1537 10-4-123 ................. 1530 10-4-141X ............... 1566 10-4-173 ................. 1513 10-4-192 ................. 1537 10-4-193 ................. 1529 10-4-21 ................... 1780 10-4-23 ................... 1535 71-1000 .................. 1577 72-0750 .................. 1581 73-1188 ................... 1877 N10270-SF ............. 1780 N102702SF ............ 1780 N104113 ................. 1526 N10412 ................... 1537 N104123 ................. 1530 N1041473 ............... 1526 N104173 ................. 1513 N104193 ................. 1529 N10423 ................... 1535 N10432 ................... 1540 N10443 ................... 1513 N10453 ................... 1546 N104573 ................. 1521 N10463 ................... 1518 N104703 ................. 1703 N10483 ................... 1548 N10493 ................... 1522 N2-26-367................. 647 N2-26-457................. 649 N2-26-527................. 648 N2-28-2137X ............ 638 N2-28-2957X ............ 633 N2-4-3331............... 1392 N2-4-803................. 1398 N2-83-388X .............. 627 N2-83-543X .............. 627 N2-83-631X ............ 628F N2-83-913X ............ 628F N3-83-024X ............ 630F N3R-26-057 .............. 646 N3R-83-482 .............. 626 S-1502 .................... 1588 .............. 1780 10-4-31 ................... 1545 10-4-32 ................... 1540 10-4-33 ................... 1517 10-4-43 ................... 1513 10-4-493 ................. 1522 10-4-53 ................... 1546 10-4-573 ................. 1521 10-4-62 ................... 1537 10-4-63 ................... 1518 10-4-703 ................. 1703 10-4-73 ................... 1519 10-4-83 ................... 1548 10-4-853 ................. 1521 10-4-93 ................... 1522 15-178X .................... 331 16-91-72 ................. 1577 2-26-367 ................... 647 2-26-407 ................... 648 2-26-457 ................... 649 2-26-477 ................... 647 2-26-497 ................... 647 2-26-527 ................... 648 2-28-1747X ............... 633 2-28-1777X ............... 637 2-28-2137X ............... 638 2-28-2947X ............... 637 2-28-2957X ............... 633 2-4-1373 ................. 1305 2-4-1383 ................. 1305 2-4-1593 ................. 1305 2-4-1603 ................. 1305 2-4-3331 ................. 1392 2-4-803 ................... 1398 2-70-18X .............. 437-10 2-70-28X .............. 492-10 2-70-38X .............. 318-10 2-70-48X .............. 530-10 2-86-348 ....................611 2-94-28X .............. 329-10 2-94-58X .............. 534-10 210476-1X ................ 616 210782X ................... 607 210841X ................... 615 211007X ................... 604 211008X ................... 604 211009X ................... 606 211177X .................... 607 211179X .................... 608 211342X ................... 609 211355X ................... 607 211407X ................... 613 212024X ................. 630F 230590.................... 1581 3-4-5111 .................. 1843 3-4-5221 ................. 1843 3-4-5231X ............... 1843 3-70-28X .............. 331-10 3-70-38X .............. 351-10 3-94-18X .............. 330-10 3-94-28X .............. 358-10 5-100X ....................514G 5-101X ...................... 340 5-102X ...................... 341 5-103X ...................... 338 5-105X ....................514G 5-107X ....................514G 5-108X ...................... 507 5-10X ........................ 330 5-110X ...................... 338 5-111X ...................... 341 5-113X ...................... 369 5-114X ....................514G 5-115X ...................... 332 5-116X ...................... 333 5-117X ...................... 334 5-1200X .................... 429 5-1201X .................... 430 5-1202X .................... 431 5-1203X .................... 433 5-1204X .................... 434 5-1205X .................... 423 5-1206X .................... 427 5-1209X .................... 429 5-120X ...................... 369 5-1210X .................... 432 5-1214X .................... 428 5-121X ...................... 369 ................... 369 5-12278X .................. 437 5-123X ...................... 335 5-124X ...................... 335 5-125X ...................... 280 5-129-1X ................... 880 5-129X ...................... 880 5-1300X .................... 305 5-1301X .................... 304 5-1302X .................... 304 5-1306-1X ................. 317 5-1306X ..................315G 5-1306XS................315G 5-1307X ..................315G 5-1308X ..................315G 5-1309X .................... 316 5-130X ...................... 354 5-1310-1X ................. 280 5-1310X .................... 369 5-1312X .................... 375 5-1313X .................... 459 5-131X ...................... 355 5-132X ...................... 369 5-1330-1X ................. 354 5-1330X .................... 354 5-134X ...................... 353 5-1350-1X ................. 231 5-1350X .................... 231 5-138X ...................... 353 5-13X ........................ 369 5-1410-1X ................. 330 5-1410X .................... 330 5-143X ...................... 331 5-146X ...................... 369 5-149X ...................... 369 5-14X ........................ 341 5-1500X .................... 395 NEAPCO PRE.NEAPCO PRE. SPICER PRE. SPICER PRE. SPICER PRE. 117UNIVERSAL JOINTS REFERENCE 390 UNIVERSAL JOINTS REFERENCE 5-1501X .................... 391 5-1502X .................... 394 5-1503X .................... 398 5-1504X .................... 397 5-1505X .................... 393 5-1507X .................... 384 5-1508X .................... 390 5-1509X .................... 396 5-1510-1X ................. 387 5-15101X .................. 387 5-1510X .................... 387 5-1511X .................... 389 5-1513X .................... 386 5-1514X .................... 385 5-1515X .................... 383 5-1516X .................... 399 5-1520X .................... 513 5-153X ...................... 369 5-155X ...................... 358 5-158X ...................... 358 5-15X ........................ 332 5-160X ...................... 330 ................... 330 5-163X ...................... 369 5-165-4CX ................ 359 5-165X ...................... 359 5-168X ...................... 359 5-16X ........................ 333 5-170-1X ................... 838 5-170X ...................... 338 5-171X ...................... 334 5-174X ...................... 331 5-177X ...................... 334 5-178X ...................... 331 ................... 331 5-17X ........................ 334 5-181X ...................... 340 5-185X ...................... 932 5-188X ...................... 351 5-1X .......................... 341 5-2002X .................... 951 5-2007X .................... 507 5-200X ...................... 369 5-2011X .................... 507 5-2012X ..................514G 5-2014X .................... 522 5-201X ...................... 369 5-2026X ..................514G 5-2031X .................... 508 5-2033X .................... 522 5-2048X .................... 508 5-2049X .................... 522 5-204X ...................... 369 5-2053X ..................514G 5-2064X .................... 507 5-2066X .................... 522 5-207X ...................... 430 5-2116X .................... 452 5-212X ...................... 355 5-213X ...................... 354 5-2140X .................... 505 5-214X ...................... 330 5-215X ...................... 332 5-216X ...................... 333 5-2173X .................... 498 5-2175X .................... 498 5-217X ...................... 334 5-218X ...................... 335 5-21X ........................ 369 5-220X ...................... 474 5-221X ...................... 470 5-222X ...................... 563 5-223X ...................... 905 5-224X ...................... 563 5-226X ...................... 335 5-227X ...................... 932 5-228X ...................... 354 5-229X ...................... 354 5-230X ...................... 354 5-231X ...................... 355 5-233X ...................... 334 5-236X ...................... 335 5-237X ...................... 351 5-242X ...................... 995 5-243-1X ................... 934 5-243X ...................... 964 5-246X ...................... 369 5-247X ...................... 369 5-248X ...................... 361 5-249X ...................... 361 5-24X ........................ 335 5-251X ...................... 280 5-252X ...................... 369 5-2530X .................... 497 5-254X ...................... 355 5-255X ...................... 280 5-258X ...................... 361 5-259X ...................... 361 5-260-1X ................... 378 5-260X ...................... 365 5-262X ...................... 330 5-263X ...................... 351 5-264X ...................... 853 5-265X ...................... 856 5-272X ...................... 335 5-273X ...................... 354 5-275X ...................... 358 5-278X ...................... 369 5-279X ...................... 333 5-280-4X ................... 334 5-280X ...................... 334 5-281-4X ................... 381 5-281X ...................... 381 5-282X ...................... 231 5-286X ...................... 335 5-297-1X ................... 377 5-297X ...................... 371 5-299X ...................... 359 5-2X .......................... 340 5-3000X .................... 536 5-3008X ..................534G 5-3009X .................... 355 5-300X ...................... 341 5-3011X .................... 492 5-3012X ..................531G 5-3022-1X ................. 372 5-3022X .................... 372 5-303X ...................... 470 5-304X ...................... 358 5-305X ...................... 427 5-306X ...................... 334 5-308X ...................... 388 5-30X ........................ 332 5-3144X .................... 536 5-3147X ..................534G 5-315X ....................437G 5-3206X .................. 351A 5-3208X .................. 331A 5-3213X .................... 429 5-3214X .................... 344 5-3215X .................... 436 5-3216X .................... 384 5-3217X .................... 399 5-3221X .................... 389 5-3222X .................... 449 5-3224X .................... 396 5-3225X .................... 889 5-3226X .................... 377 5-3236X .................... 331 5-3242X .................... 507 5-3244X .................... 347 5-3246X .................... 457 5-3247X .................... 497 5-3248X .................... 459 5-324X ...................... 480 5-3250X .................... 423 5-3251X .................... 305 5-3252X .................... 332 5-3255X .................... 375 5-325X ...................... 358 5-3260-1X ................. 428 5-3264X ..................531G 5-328X ...................... 484 5-332X ...................... 374 5-344X ...................... 353 5-347X ...................... 559 5-350X ...................... 429 5-353X ...................... 319 5-354X ...................... 449 5-355X ...................... 458 5-356X ...................... 372 5-357X ...................... 362 5-360X ...................... 365 5-3613X ..................369C 5-3614X ..................354C 5-3615X ..................231C 5-3616X ..................330C 5-4002X .................... 540 5-4014X .................... 544 5-4015X .................... 545 5-4016X .................... 546 5-407X ...................... 376 5-409X ...................... 434 5-4111X .................... 969 5-4112X .................... 929 5-4140X .................... 929 5-4143X .................... 969 5-4144X .................... 540 5-419X ...................... 369 5-420X ...................... 379 5-429X ...................... 330 5-430X ...................... 840 5-431X ...................... 888 5-432X ...................... 889 5-433-1X ................... 280 5-436X ...................... 355 5-438X ...................... 475 5-442X ...................... 476 5-443X ....................437G 5-447X ....................231C 5-456X ...................... 436 5-460X ...................... 348 5-462X ...................... 330 5-464X ...................... 471 5-467X ....................369C 5-469X ...................... 877 5-471X ...................... 231 5-477X ...................... 369 5-478X ...................... 354 5-479X ...................... 354 5-480X ...................... 331 5-481X ...................... 330 5-482X ...................... 351 5-485X ...................... 351 5-4X .......................... 344 5-5000X .................... 550 5-5008X .................... 554 5-5015X .................... 557 5-5108X .................... 968 5-510X ...................... 478 5-5111X .................... 968 5-511X ...................... 369 5-5121X .................... 552 5-515X ...................... 476 5-5177X .................... 968 5-521X ....................354C 5-523X ...................... 358 5-526X ....................437G 5-527X ...................... 347 5-529X ...................... 369 5-538X ...................... 434 5-539X ...................... 319 5-541X ...................... 355 5-542X ...................... 231 5-543X ...................... 358 5-544X ...................... 372 5-546X ...................... 369 5-547X ....................437G 5-550X ...................... 455 5-554X ....................437G 5-565X ...................... 460 5-5800X .................... 894 5-584X ...................... 331 5-589X ....................315G 5-598X ...................... 319 5-599X ...................... 457 5-6000X .................... 560 5-6016X .................... 560 SPICER PRE.SPICER PRE.SPICER PRE. SPICER PRE. 118UNIVERSAL JOINTS REFERENCE 391 UNIVERSAL JOINTS REFERENCE OEM PRE. OEM PRE. 5-60X ........................ 330 5-6102X .................... 563 5-6106X .................... 905 5-6108X .................... 568 5-6109X .................... 569 5-610X ...................... 475 5-611-1X ................... 369 5-6110X .................... 905 5-6111X .................... 905 5-6144X .................... 560 5-617X ....................231C 5-618X ...................... 354 5-619X ...................... 355 5-61X ........................ 341 5-621X ...................... 355 5-625X ...................... 369 5-626X ....................369C 5-627X ...................... 231 5-631X ....................354C 5-633X ...................... 434 5-634X ...................... 319 5-635X ...................... 458 5-636X ...................... 316 5-637X ...................... 458 5-63X ........................ 369 5-641X ...................... 330 5-647X ...................... 319 5-648X ...................... 448 5-656X ...................... 334 5-658X ...................... 376 5-668X ...................... 388 5-674X ...................... 875 5-675X ...................... 876 5-676X ...................... 878 5-677X ...................... 877 5-70-28X .............. 475-10 5-7000X .................... 570 5-70X ........................ 338 5-7105X ..................927B 5-7111X .................. 927B 5-7115X .................... 574 5-718X ...................... 429 5-71X ........................ 369 5-7202X .................... 574 5-7206X .................... 572 5-7436X .................... 355 5-7437X .................... 458 5-7438X .................... 434 5-7439X .................... 430 5-74X ........................ 365 5-760X ...................... 371 5-785X ...................... 369 5-786X ....................369C 5-787X ...................... 430 5-788X ...................... 319 5-789X ....................315G 5-78X ........................ 331 5-790X ...................... 354 5-791X ....................354C 5-792X ...................... 434 5-793X ...................... 355 5-794X ...................... 355 5-795X ....................534G 5-796X ...................... 458 5-797X ...................... 458 5-799X ...................... 231 5-800X ....................231C 5-801X ...................... 330 5-802X ....................330C 5-803X ...................... 351 5-806X ...................... 374 5-808X ...................... 358 5-8105X .................... 928 5-810X ...................... 280 5-8111X .................... 928 5-811X ...................... 316 5-812X ...................... 354 5-81X ........................ 340 5-8200X .................... 581 5-8201X .................... 582 5-8202X .................... 783 5-82X ........................ 341 5-86X ........................ 231 5-88X ........................ 374 5-9000X .................... 793 5-9001X .....................911 5-9002X .................... 792 5-9111X .....................911 5-9112X .................... 792 5-9122X .................... 793 5-92X ........................ 861 5-94X ........................ 344 5004989.................... 427 500570-6 ................ 1588 5006813.................... 464 5C-3X ....................... 559 6.5-70-18X ........... 476-10 6C-3X ....................... 470 6C-5X ....................... 474 6C-9X ....................... 563 SPL100-1X ............... 460 SPL1001X ................ 460 SPL170-3X ............... 578 SPL170-4X ............... 578 SPL170X .................. 578 SPL22-1X ................. 369 SPL22-2X ...............369C SPL22-3X ................. 430 SPL22-4X ................. 319 SPL22-7X ................. 280 SPL22-8X ...............315G SPL25-10X ............... 354 SPL25-1X ................. 354 SPL25-2X ...............354C SPL25-3X ................. 434 SPL25-4X ................. 355 SPL25-6X ...............534G SPL25-7X ................. 458 SPL25-9X ................. 316 SPL250-3X ............... 579 SPL2503X ................ 579 SPL250X .................. 579 SPL30-1X ................. 231 SPL30-2X ...............231C 1783232.................... 582 1783687.................... 928 1785443.................... 508 1801323.................. 927B 1852631.....................911 6483663.................... 995 21707205.................. 570 21708207.................. 783 21709016...................911 25925060.................. 397 25989251.................. 397 30083927.................. 452 30138093.................. 332 30245088.................. 332 30267264.................. 964 30267272.................. 964 30285738.................. 332 30288625.................. 332 41414120.................. 410 60425060.................. 384 60711616 .................. 413 61880506.................. 964 70689251.................. 384 173524704................ 370 173525704................ 333 175789251................ 386 215889251................ 397 252525060................ 384 381124149 .............. 927B 391925060................ 385 437104010................ 369 437104030................ 433 437110011 ................ 395 437120011 ................ 394 437122010................ 394 437122011 ................ 394 437130011 ................ 390 437130021................ 387 437130030................ 387 437130040................ 387 437135020................ 387 437135021................ 387 437135030................ 387 437135040................ 387 437136010................ 396 437136011 ................ 396 437136021................ 389 437136030................ 389 437160010................ 396 437187304................ 450 622032000................ 391 622043000................ 393 1011000070 .............. 452 1011000080 .............. 994 1011017100 .............. 452 1011017200 .............. 994 1051215030.............. 413 1131200010 .............. 969 1131232100 .............. 494 1311046110 .............. 968 1351400030.............. 905 1373000472.............. 462 1373000580.............. 461 1373000780.............. 358 1421213120.............. 565 1441012610............ 927B 1451400190.............. 905 1451435110 .............. 905 1546612100.............. 968 1752000060.............. 963 1754815017.............. 413 1756011520 .............. 905 1952011100 ...............911 2322052112 ............927B 2322054110 ............927B 2382011310 .............. 968 2720060810.............. 398 2720060811 .............. 398 2720073812.............. 398 2720083810.............. 398 3612011110 .............. 494 3622011210 .............. 968 3712511975 .............. 340 3712514600.............. 391 3712514625.............. 391 3712514626.............. 391 3712514627.............. 391 3712518000.............. 392 3712518025.............. 392 3712585425.............. 331 3808903731.............. 968 3818819081.............. 968 3819769081.............. 905 3962521001.............. 393 3962521005.............. 393 3962521026.............. 393 3962521027.............. 393 3962621029.............. 393 4152012620.............. 998 4162012620.............. 494 4192012620.............. 565 4192012621.............. 565 4212011520 .............. 483 4212011620 .............. 483 4212012620...............911 4232012620.............. 483 4242012620.............. 928 4252011620 .............. 928 5373000320.............. 382 SPL36-1X ................. 330 SPL36-2X ...............330C SPL55-1X ................. 351 SPL55-3X ................. 374 SPL55-4X ................. 374 SPL55X .................... 351 SPL70-1X ................. 358 SPL70-3X ................. 424 SPL70-4X ................. 424 SPL703X .................. 424 SPL70X .................... 358 SPL90X .................... 460 SPICER PRE.SPICER PRE. SPICER PRE. 119UNIVERSAL JOINTS REFERENCE 392 UNIVERSAL JOINTS REFERENCE 6659156320.............. 410 6671631160 .............. 397 8006793860......... 331-10 8941556320.............. 383 8942389300.............. 383 8942389301.............. 383 8943326830.............. 383 8943661820.............. 383 8943763730.............. 382 8944152250.............. 341 8944152260.............. 383 8944200320.............. 340 8944790540.............. 383 8970202280......... 437-10 8970202790.............. 369 8970718120.............. 383 8970718121.............. 383 8970805050.............. 382 8970813300.............. 330 8971673170...............411 8971821650.............. 369 8979430420...............411 8979430421...............411 8979451020...............411 8979476450...............411 9373000170.............. 340 9373000350.............. 383 9373000360.............. 383 9373000650.............. 383 9373000920.............. 340 9373006010.............. 383 9373006030.............. 383 9373006050.............. 383 9373006090.............. 341 38510178551............ 558 38510178571............ 905 38510193741.......... 927B 04137757AA ............. 371 043710C010 ............. 369 043710C080 ............. 331 043710C081 ............. 331 043710C094 ............. 331 0437120010J ............ 394 0437135020J ............ 387 0437135030.............. 387 0437135031.............. 387 0437135040.............. 387 0437135050.............. 387 0437135051.............. 387 0437160070.............. 387 043750C020 ............. 354 043750C030 ............. 354 043750C040 ............. 354 043750C041 ............. 354 05003004AB ............. 374 060489251A ............. 384 060489251J .............. 384 0N01025060A ........... 386 .............. 369 100524060................ 344 10070613.................. 369 100E7039 ................. 341 101281330................ 341 10147926.................. 372 1016245M91...........534G 102684R91 ............... 570 1029144M91............. 554 1029148M91............. 997 1029148M92............. 997 1029201M91............. 540 105086665AC........... 464 105093376AB ........... 330 1052614M91........... 927B 1052619M91............. 905 105E7039 ................. 344 105E7039A ............... 341 1064846.................... 304 1087314M91............. 563 1089666M91............. 964 108991R92 ............... 561 1091060M91............. 332 1091075M91............. 570 1092939M91............. 899 1094925M91............. 933 110724A1 ................. 861 110859R91 ............... 507 110860R91 ............... 508 110861R91 ............... 522 1110935C91 ........... 927B 1111731C91 ...............911 111793C91 ............... 905 1126463 .................... 570 1134986 .................... 570 ................. 951 116893R91 ............... 540 116E4635A ............... 340 116E4635B ............... 341 116E4635B ............... 340 1174981 .................... 995 ................. 570 ................. 783 1181735 .................... 365 11992487 .................. 330 11992488 .................. 358 ............. 933 1209814.................... 344 121345R91 ............... 331 121406R91 ............... 369 ............. 470 121684R92 ............... 333 1217606.................... 340 121762R92 ............... 334 1220786.................... 369 1220998.................... 369 ............... 330 ............... 927B ............... 928 ............... 928 12385742.................. 330 12387782.................. 875 12387783.................. 876 124645R91 ............... 570 12471502................534G 12471510.................. 330 12472402.................. 355 12472406.................. 330 12472407.................. 354 12473124.................. 354 12475327.................. 333 12476135.................. 354 12476136.................. 355 12476310.................. 330 12478057.................. 330 12479126................534G 1253954C91 ............. 889 12543573.................. 354 12543576.................. 355 12545626.................. 354 12545628.................. 355 12547189.................. 331 12569884.................. 409 ............. 905 ............. 905 ........... 969 ............. 968 ................. 540 ................. 563 ................. 561 ................. 560 ............... 452 ................. 544 ................. 581 ................. 582 ................. 541 ................. 540 127573R91 ............... 331 127574R91 ............... 330 1277256C1 ............... 374 1281444C1 .......... 341AG 1287712C1 ............... 374 1309468.................... 951 132083R91 ............... 983 1321115 .................... 369 1325989.................... 853 133137C91 ............... 351 ................. 554 ................ 554 1342711C1 ............... 813 1345726.................... 351 13476230.................. 331 ................. 969 ................. 905 ................. 928 1358938............... 329-10 ............... 927B ................... 550 ................. 550 ................... 570 ................. 570 ................. 570 ................... 560 1373000840.............. 460 1388249.................... 354 1389604.................... 355 1389837.................... 355 1389839.................... 354 1389865.................... 354 14034819.................. 355 14046907............. 331-10 140604R92 ............... 574 14067677.................. 331 14067678.................. 369 1421352M1............... 905 142136C1 ................. 905 1423444M1............... 280 1424133C1 ............... 968 1424820.................... 536 1427476.................... 540 142823R91 .............534G 142824R91 .............531G 1429021M1............... 231 142923R91 .............534G 142973R91 .............534G 142A487 ................... 331 1450723.................... 522 1456503..................531G 1456525.................... 492 1463259..................531G 1463546..................531G 1463547.................... 536 1463548.................... 492 1470373.................... 354 1470374.................... 355 1482672.................... 354 ................. 452 ................. 951 150635R92 ............... 861 1516853.................... 330 1516854.................... 331 152227R92 ............... 783 152275R91 ............... 581 152276R92 ............... 783 ................. 369 ................. 351 ................. 331 1541448.................... 369 1550426.................... 369 15510800................351R 15510801................351R 15515792.................. 351 15515793.................. 330 15522953............. 351-10 155277AS ................. 550 15532574.................. 381 15535490.................. 358 15536284.................. 358 1555456.................... 340 15576468.................. 354 15577432.................. 355 15580369.................. 354 15582093.................. 354 15583283.................. 331 1559481.................... 507 1559482.................... 505 15599179.................. 330 15617319.................. 455 15617322.................. 369 15619081.................. 475 OEM PRE. OEM PRE.OEM PRE.OEM PRE. 120UNIVERSAL JOINTS REFERENCE 393 UNIVERSAL JOINTS REFERENCE 15619082.................. 476 1562019.................... 369 1563060.................... 369 15633733.................. 861 15634912.................. 330 15636784.................. 477 15744812............. 530-10 157794R91 ............... 507 ................. 358 ................. 550 15898097................ 351A ................. 550 1604073..................514G ................. 929 1643242.................... 369 1658880C91 ............. 476 1681117C91 ............. 460 1687069.................... 429 1687083.................... 423 1687251.................... 331 1687253.................... 330 1687692.................... 369 1690409.................... 369 1691761.................... 429 1691762.................... 423 1695947.................... 351 1696914C91 ............. 875 1696915C91 ............. 876 1696917C91 ............. 877 1698021.................... 369 16DS150................... 333 ............... 927B 1752307.................... 351 1752317.................... 333 1752325.................... 332 1752412.................... 330 1752559.................... 423 1752624..................315G 1752624.................... 315 ................. 331 ................. 581 1792216.................... 340 ................. 889 ................. 963 1818920.................... 369 1818921.................... 369 181SJ18 ................... 351 181SJ50 ................... 338 1828824............... 318-10 1843030.................... 338 1843347.................... 429 18443143.................. 365 ..................911 186874R91 ............... 429 186894R91 ............... 429 ................. 928 1881657.................... 304 19114064 .................. 464 19121436.................. 351 19161806................ 330A 19161807................ 331A 19161808................ 351A 19161810.................. 409 19161814................ 630F 1925252.................... 429 192909R91 ............... 898 195221M91............... 853 195379M91............... 889 1961778C1 ............... 351 ..................911 .................. 964 197035R91 ............... 861 ................. 905 1981084C1 ............... 967 1984235C1 ............... 812 ................. 905 1M7039A .................. 508 2002E4635A ............. 333 2002E4635B ............. 334 200464C91 ............... 880 2011875 .................... 861 201SJ11 .................... 331 201SJ12 ................... 330 201SJ12A ................. 330 201SJ13 ................... 332 201SJ14 ................... 333 201SJ15 ................... 334 201SJ15B ................. 334 201SJ16 ................... 335 201SJ16B ................. 335 201SJ17 ................... 340 201SJ19 ................... 341 201SJ19A ................. 341 201SJ20 ................... 892 201SJ21 ................... 332 201SJ22 ................... 369 201SJ23 ................... 334 201SJ25 ................... 333 201SJ26 ................... 331 201SJ27 ................... 341 201SJ29 ................... 369 201SJ31 ................... 358 201SJ32 ................... 932 201SJ33 ................... 359 201SJ35 ................... 335 201SJ36 ................... 338 201SJ39 ................... 581 201SJ40 ................... 570 201SJ47 ................... 334 201SJ48A ................. 570 201SJ50 ....................911 201SJ53 ................... 793 201SJ54 ................... 783 201SJ73 ................... 332 ................. 894 202347C91 ............... 861 2029986.................... 351 ................. 861 ................. 340 2040210.................... 376 2041235.................... 896 2041472.................... 574 2041859.................... 570 2041860.................... 895 204E7039 ................. 340 204E7042 ................. 340 2051472.................... 574 2055552.................... 381 2057273.................... 331 2057289.................... 351 2058300.................... 334 2065059.................... 932 2066840............... 330-10 206SL11 ................... 870 206SL11A ................. 870 206SL12 ................... 861 206SL13 ................... 861 206SL13A ................. 861 206SL14 ................... 338 206SL15 ................... 861 206SL16 ................... 560 206SL16 ................... 861 206SL19 ................... 332 206SL21 ................... 861 2084313.................... 358 2084800.................... 423 208959R91 ............... 330 2098536.................... 335 20B2232691 ............. 369 20G2222691 ............. 358 21045103X ............... 338 21045124X ............... 335 21045165X ............... 335 21045165X ............... 359 21045208X ............... 334 21045218X ............... 381 21045279X ............... 333 21045280X ............... 334 21045308X ............... 388 21045324X ............... 480 21045337X ............... 480 21045407X ............... 376 21045470X ............... 376 210459001X ..............911 2104592X ................. 861 213882R91 ............... 338 213E4635A ............... 344 2156475.................... 544 ................. 358 ..................911 21705281X ............... 381 21705407X ............... 376 21705469X ............... 477 217193R91 ............... 899 ................. 423 2185901.................... 330 2186972.................... 331 2186973.................... 331 219193R91 ............... 861 219303R91 ............... 427 2196041.................... 334 21C7039 ................... 369 21C7039A ................. 369 21X20910A ............... 905 21X20910C............... 905 ................. 423 2200211 .................... 861 220196R91 ............... 880 2222853.................... 334 2222854.................... 333 2223567.................... 332 2223568.................... 330 2224005.................... 335 222431C91 ............... 540 222444C91 ............. 1501 2230781.................... 331 2240231.................... 338 2263882.................... 330 226800R91 ............... 428 2284935.................... 332 2294607.................... 338 2298621.................... 330 2298823.................... 331 2298908..................315G 23104840................534G 2311144 .................... 486 2322134.................... 332 2322135.................... 332 2322136.................... 333 2322138.................... 334 2325029.................... 369 2325829.................... 369 2335005.................... 335 2335006.................... 335 2341648.................... 351 2354320.................... 369 2354324.................... 332 2362830.................... 369 2366108.................... 334 2368954.................... 889 2370728.................... 369 2370733.................... 334 2372959.................... 536 2378764.................... 889 2378954.................... 889 237897R91 ............... 568 237899R91 ............... 570 2380169.................... 486 238075R91 ............... 560 238077R81 ............... 570 238079R91 ............... 581 238374R91 ............... 568 238386R91 ............... 783 238448R91 ............... 560 238449R91 ............... 570 238450R91 ............... 581 2386331.................... 861 238739R91 ............... 544 238740R91 ............... 544 238796R91 ............... 550 238797R91 ............... 554 238798R91 ............... 554 238800R91 ............... 557 238801R91 ............... 557 239551R91 ............... 932 239723R91 ............... 334 239737R91 ............... 572 239738R91 ............... 572 OEM PRE. OEM PRE.OEM PRE.OEM PRE. 121UNIVERSAL JOINTS REFERENCE 394 UNIVERSAL JOINTS REFERENCE 239739R91 ............... 572 2398294.................... 895 2398295.................... 896 23A2011210 ............. 483 23A2011710 ............. 565 2400938.................... 358 2400E4635A ............. 344 240178R91 ............... 358 240190R91 ............... 358 2402E4635A ............. 369 2403229.................... 359 2403700.................... 365 2404877.................... 338 2409783.................... 365 2415CGA .................. 870 .................. 870 2417789.................... 359 2420606.................... 861 2448100.................... 369 2448382.................... 369 2450093.................... 331 2460455.................... 369 2466726.................... 861 2495043.................... 359 2505767.................... 898 2533202.................... 354 255341R91 ............... 570 259770R93 ............. 927B 26001170 .................. 861 26002697.................. 355 26008858.................. 429 26015249.................. 369 26021107 .................. 429 26034328............. 530-10 26042371................534G 271421R91 ............... 928 2720053830.............. 408 2720066810.............. 408 2720083010.............. 398 2720083820.............. 408 279470R92 ............... 905 279986R91 ............... 933 2852175.................... 316 290928R91 ............... 550 291736R91 ............... 536 293551C91 ............... 932 294769R91 ............... 540 295578R91 ............... 536 296596R91 ............... 550 3004690.................... 536 3004900.................... 317 3006546.................... 951 3006595.................... 540 3006895.................... 540 3008392.................... 452 3008E4635A ............. 340 3010E4635A ............. 344 3011020 .................... 934 3011022 .................... 934 3011050 .................... 934 3012E4635A ............. 340 3013809.................... 332 301587R91 ................911 301592R91 ............... 928 3021862.................... 892 3024508.................... 332 3026726.................... 964 3026727.................... 964 302725C92 ............... 581 302726C91 ............... 783 302737C91 ............... 963 3028573.................... 332 3028862.................... 332 303294R91 ................911 303852R91 ............... 928 3038633.................... 893 3039559.................... 898 3040372.................... 793 3040377.................... 793 304105R91 ................911 304106R92 ............... 928 3044128.................... 892 3044617.................... 899 304608C91 ............... 793 304609C91 ............... 792 305852R91 ............... 928 305952R91 ............... 928 306114R91 ............... 436 307949R91 ............... 934 3100758R91 ............. 344 3108170..................514G 3108171.................... 508 3108181..................531G 3109409.................... 508 3109413.................... 536 3109413.................... 536 3112002 .................... 507 3112479 .................... 544 3112579 .................... 544 3112942 ..................514G 3113002 .................... 507 3113942 ..................514G 3114708 ..................315G 3114708 .................... 315 3115912 .................... 507 3116717 ..................514G 3117373 .................... 369 3117373 .................... 369 3119275 .................... 508 3119649 .................... 507 3119731 .................... 513 3119752 .................... 340 3125068.................... 535 3145473.................... 369 3153801.................... 535 3156293.................... 369 3163514..................514G 3165080.................... 341 3165080.................... 340 3166462..................514G 316726M91............... 861 3171348..................514G 3172840.................... 507 317712R92 ............... 933 317713R92 ............... 552 317721R91 ............... 997 317722R91 ............... 554 3188632.................... 369 3195054.................... 369 31X12715A ............... 570 3200332.................... 507 3200537..................514G 3200538.................... 507 3200539.................... 513 3200854..................514G 3200855.................... 507 3200856.................... 513 3202655.................... 369 3202657.................... 369 3203992.................... 429 3203992.................... 507 3204918..................514G 3205371.................... 507 3206121.................... 507 3206122.................... 498 3206247..................514G 3206980.................... 498 3206981.................... 498 3207077.................... 498 3207078.................... 507 3207078.................... 498 3207079.................... 498 3207174..................514G 32075201.................. 333 3207885.................... 369 3207885.................... 369 3208473.................... 369 3209076..................514G 321291R91 ............... 335 321485R91 ............... 507 3218621.................... 330 321921R91 ............... 335 3219885.................... 437 3233715.................... 319 3235473............... 437-10 3240553............... 437-10 324550R91 ................911 324667R91 ............... 928 325326R91 ............... 563 327204R92 ............... 563 328592C91 ............... 369 3310344M91............. 280 3310490M91............. 344 333832R91 ............... 558 337439R91 ............... 861 338412R91 ............. 927B 338591R91 ............... 928 338779R92 ............... 335 338923R92 ............... 999 3427330M91............. 331 3427346M91........ 344AG 3427352M91............. 369 347385R91 ............... 334 3475808M1............... 280 347960R91 ............... 964 3480934.................... 319 350254R91 ............... 861 3520997.................... 344 355415C91 ............... 569 357439R91 ............... 861 357606R91 ............... 861 357607R91 ............... 861 358412R91 ............. 927B .................. 793 ........... 581 ........... 783 ........... 895 ........... 896 .................911 ........... 581 ........... 581 ........... 783 ........... 783 ................ 792 ............. 570 ............. 574 363308R91 ............... 861 363312R91 ............... 861 363313R91 ............... 861 3634563.................... 316 366312R91 ............... 861 366313R91 ............... 861 368730R91 ............... 861 3707163.................... 331 3707830.................... 330 3707891.................... 331 3708931.................... 331 3708961.................... 331 37124P3000 ............. 391 3712501G26 ............. 446 3712549W26 ............ 391 ............. 392 ............. 392 ............. 391 ............. 392 37125P3000 ............. 391 3712601G25 ............. 446 371263S525 ............. 280 371263S526 ............. 369 37126C9425 ............. 393 37126EA025 ............. 354 37126EA027 ............. 354 3713926.................... 369 3724205............... 358-10 3736380.................... 995 3737508.................... 351 3737589.................... 351 3741635.................... 369 3741653.................... 369 3744918.................... 371 3750686.................... 369 376892C91 ............... 570 3780158.................... 365 3780250..................315G 3780272.................... 304 3780280.................... 319 38124S3800 ........ 437-10 3817179.................... 861 OEM PRE. OEM PRE. OEM PRE. OEM PRE. 122UNIVERSAL JOINTS REFERENCE 395 UNIVERSAL JOINTS REFERENCE 3820254.................... 334 3820255.................... 333 3822292.................... 381 3823102.................... 331 3827046.................... 369 3828469.................... 369 3830580.................... 369 3837585.................... 374 3849500.................... 369 3851520.................... 331 3869039.................... 861 387097R91 ............... 351 3877040.................... 331 3882979............... 360-10 3889690.................... 369 3889696.................... 331 3910235.................... 369 3918866.................... 861 391989251................ 385 3920486............... 492-10 393671R91 ............... 899 3937988.................... 354 3948724.................... 647 3953659.................... 369 3955571.................... 369 3962521025.............. 393 ............. 393 39625N3725 ............. 393 39625N4125 ............. 393 ............. 393 ............. 393 ............. 393 ............. 393 39626S3825 ............. 369 3979617.................... 331 3981590.................... 365 399040C91 ............... 861 3CAR29699R ........... 536 3W1Z4635AA ........... 354 400E4635A ............... 341 401159R1 ................. 933 4024300.................... 340 4030848..................534G 4031001.................... 626 4049697.................... 606 404E4635A ............... 344 4050350.................... 369 4057025.................... 316 4137757.................... 371 4137757AA ............... 371 4137780.................... 374 416946C91 ............... 570 4213200.................... 304 422910C91 ............... 381 427804C91 ............... 365 4315375.................... 486 432433C91 ............... 793 432473C91 ............... 861 4355589.................... 331 4359790.................... 331 4364400..................315G 4364562.................... 379 437104020................ 369 437110010 ................ 395 437120010................ 394 437125010................ 390 437130010................ 390 437130020................ 387 437135020................ 387 437135031................ 387 437135050................ 387 437136020................ 389 4384514.................... 317 4384661.................... 319 4384662.................... 379 4384663.................... 607 4388672.................... 231 4428723............... 331-10 4428800.................... 330 4443100.................... 317 447797C91 ............... 338 4485624.................... 369 4487436.................... 369 4487847.................... 369 4488016.................... 369 4488106.................... 369 4498505.................... 963 4504575.................... 316 453999R91 .............534G 454740R91 ............... 853 4620151.................... 335 4622384.................... 340 4651538.................... 369 4655161.................... 330 4655182.................... 330 4656653.................... 333 4675621.................... 330 4675624.................... 330 4679190.................... 341 4699475.................... 370 4699481.................... 333 470077R91 ............... 889 4713528.................... 457 4720822.................... 317 4723672.................... 231 4728937.................... 369 4741304.................... 458 4746936.................... 354 474792R91 ............... 507 474793R91 ............... 507 4762487.................... 452 4762489.................... 452 476674R91 ............... 861 4773033..................628C 4773162.................... 458 4780404.................... 358 4797307.................... 231 4797307AB ............... 231 480486R91 ............... 995 480613R91 ............... 964 4862684.................... 969 4882793.................... 369 4905112 .................... 549 4906478.................... 994 4906479.................... 452 4908839.................... 574 4914098.................... 994 4914099.................... 452 493849R91 ............... 888 4984504.................... 508 4984504.................... 452 4984505.................... 994 4987664.................... 452 4991328.................... 541 4993479.................... 929 4993479.................... 541 4L3Z4635A ............... 354 4L5Z4635BA ............. 369 5003004AA ............... 374 5003004AB ............... 374 5003146AA ............... 330 500665E ................... 995 5014062AA ............... 354 5014063AA ............... 458 5014733AA ............... 354 5014733AB ............... 354 5015694AA ............... 369 5015694AB ............... 369 5016382AA ............... 458 5016382AB ............... 458 502529E ................... 853 502579E ................... 861 5086665AA ............... 464 5086665AB ............... 464 5086665AC............... 464 5086665AE ............... 464 508E7039 ................. 370 509047R91 ............... 880 509260E ................... 861 5093376AB ............... 330 5093377AA .............534G 5093377AB .............534G 5093377AC.............534G 5093382AA ............... 351 5093382AA ............. 351A 5093820AA ............... 355 5093820AB ............... 355 5102157AA ............... 351 5102157AA ............. 351A 5102157AB ............... 351 5102157AB ............. 351A 5102157AC............... 351 5102157AC............. 351A 5102157AD............... 351 5102157AD............. 351A 5102157AE ............... 351 5102157AE ............. 351A 511644R91 ............... 861 511705R91 ............... 983 5142222AA ............. 331A 5161766AA ............... 369 5175392AA ............... 354 5175392AB ............... 354 52097559.................. 316 52125237.................. 316 52125238.................. 316 52347009.................. 316 52347114 .................. 331 52347432.................. 354 52347483.................. 369 52347696.................. 369 52348307.................. 429 52348315.................. 430 52348358.................. 433 52348366.................. 434 52348455.................. 492 52348706................534G 528E7039 ................. 330 53000029.................. 369 5373000310.............. 341 538395R91 ............... 898 55A2049 ................... 386 561452C91 ............... 861 5671712.................... 492 5675412.................... 507 5675414.................... 507 5675415.................... 507 5677659.................... 492 568E7039 ................. 370 569047R91 ............... 880 569085R91 ............... 536 5698221.................... 355 5702158.................... 341 5740083.................... 354 581954R91 ............... 507 5C3Z3249BA ............ 424 5LT9017 .................... 880 602108R91 ............... 853 60489251.................. 384 607917R91 ............... 880 609144R91 ............... 995 613471R91 ............... 964 613630C91 ............... 563 613668R91 ............... 995 613878C91 ............... 563 615155C91 ............... 563 6175129.................... 369 6179097.................... 338 6212893.................... 351 6213325.................... 390 6213643.................... 928 6213646.................. 927B 6258549.................... 607 6268535.................... 351 627253C1 ................. 495 627254C1 ................. 535 6273940.................... 371 630385C1 ................. 561 630389C91 .............927B 631042C93 ............... 905 631934C91 ............... 574 634362C91 ............... 335 634539C91 ............... 334 634830C91 ............... 966 644137C91 ............... 359 645573R91 ............... 369 645574R92 ............... 331 645578R91 ............... 369 OEM PRE.OEM PRE. OEM PRE.OEM PRE. 123UNIVERSAL JOINTS REFERENCE 396 UNIVERSAL JOINTS REFERENCE 647869R93 ............... 332 65343R91 ................. 508 65345R91 ................. 508 65346R92 ................. 536 65347R91 ...............531G 65348R91 ................. 540 65350R92 ................. 544 65351R92 ................. 560 65351R93 ................. 560 656222R91 .............534G 656223R92 ............... 507 656226R92 ............... 983 65706R92 ................. 545 6582753.................... 341 659262R91 ............... 995 6598303.................... 452 6598304.................... 994 660116R91 ............... 964 661372R91 ............... 861 661677R91 ............... 861 663120R91 ............... 861 665137M91............... 880 667496R91 ............... 880 667558R91 ............... 880 668172M91............... 870 669564R91 ............... 995 678510B ................... 335 68003521AB ........... 330A 68004848AA ........... 331A 68004848AB ........... 331A 68004848AC........... 331A 68004852AB ............. 358 68004852AC........... 358A 68034436AA ............. 821 68034436AB ............. 821 68036714AA ............. 231 68036720AA ............. 358 68048401AA ............. 231 68048401AB ............. 231 68048402AA ............. 231 68048402AB ............. 231 68065428AB ............. 479 68065428AC............. 479 68067351AA ............. 231 68127993AA ............. 330 68206321AA ............. 358 68206453AA ............. 330 68206456AA ............. 330 682597R91 ............... 428 6852612.................... 370 6861043.................... 570 6867171.................... 333 6876177.................... 370 6933772.................... 793 69557R93 ................. 581 69558R91 ................. 557 69559R91 ................. 546 69561R91 ................. 522 69577R93 ................. 581 697689R91 ............... 333 697690R91 ............... 334 698997R91 ............... 793 6L2Z4635A ............... 369 70004020.................. 964 70004690.................. 536 70006546.................. 951 70006595.................. 540 70007209.................. 536 70007211 .................. 535 70008392.................. 452 70011020 .................. 934 70013113 .................. 964 70013809.................. 332 70020268.................. 507 70021862.................. 892 70024508.................. 332 70026726.................. 964 70026727.................. 964 70026728.................. 964 70028573.................. 332 70028862.................. 332 70034121.................. 536 70038633.................. 893 70039559.................. 898 70040372.................. 793 70040377.................. 793 70044128.................. 892 70044317.................. 899 70044617.................. 899 70053120.................. 861 70057614.................. 540 70058735.................. 570 70069953.................. 785 700706779................ 817 700707171........... 331AG 700707540........... 344AG 700708781........... 344AG 700711843 ................ 995 70075614.................. 540 70080132................ 927B 70080470.................. 331 70081058.................. 861 70081559.................. 330 70082073.................. 508 70082744.................. 507 70083541.................. 570 70083616.................. 570 7008392.................... 452 70084328.................. 561 70084395.................. 957 70084435.................. 957 70084537.................. 958 70084545.................. 554 70085918.................. 560 70086284.................. 540 70086747.................. 550 70086752.................. 552 7014393.....................611 70178183.................. 581 70178323.................. 582 70178368.................. 928 70178461.................. 951 70178544.................. 508 70178554.................. 966 70178554.................. 996 70179151.................. 963 70179502.................. 550 70179507.................. 963 70179571.................. 967 70179704.................. 963 70179904.................. 963 70179909.................. 963 70180132................ 927B 70180140.................. 963 70182132................ 927B 70185263...................911 70187964...................911 70224890.................. 861 70255608.................. 351 70259668................ 927B 70259677.................. 923 70259678.................. 923 70262776.................. 905 70262777.................. 905 70262778.................. 905 70270785.................. 358 70270789.................. 359 70272606.................. 968 70272723.................. 486 70275222.................. 905 70275451.................. 475 70276115 .................. 905 70276116 .................. 905 70276117 .................. 905 702952C91 ................911 70339981.................. 995 70498504.................. 452 70498505.................. 994 70517038.................. 856 70517039.................. 856 70517308.................. 870 70517309.................. 853 70517310.................. 853 70517310.................. 870 70517311 .................. 853 70517311 .................. 880 70517312.................. 853 70517312.................. 964 70518038.................. 856 70518038.................. 880 70518039.................. 856 70518039.................. 964 70518040.................. 853 70518140.................. 856 70521720.................. 856 70521720.................. 880 70524521.................. 853 70526299.................. 880 70530538.................. 964 70531220.................. 880 70534235.................. 861 70542862.................. 995 70546945.................. 995 70612621.................. 513 70617512.................. 369 70617703.................. 536 70617909.................. 338 70618805.................. 934 70619703.................. 535 70619915.................. 541 70629943.................. 572 70629944.................. 570 70631383.................. 983 70639511 .................. 785 70645053.................. 338 70645110 .................. 338 70647098.................. 535 70648366.................. 995 70649098.................. 535 70653811 .................. 861 70658275.................. 340 70665314...................911 70665611 .................. 934 70666878.................. 861 70667467.................. 968 70680968.................. 561 70680970.................. 560 70680998.................. 552 70681008.................. 560 70681008.................. 570 70681014.................. 550 70681014.................. 552 70681024.................. 570 70681028.................. 572 70681049.................. 550 70682580.................. 968 70682580.................. 572 70682636.................. 540 70687517.................. 968 70687517.................. 963 70689077.................. 540 70689077.................. 563 70692644.................. 574 70692644.................. 963 70823456.................. 563 70823456.................. 880 70836163.................. 570 71004676.................. 958 71007023.................. 330 71126463 .................. 570 71134986 .................. 570 71174981 .................. 995 71334986.................. 570 71783C1 ................... 574 72372959.................. 536 73004690.................. 536 73006546.................. 951 73006595.................. 540 73008392.................. 452 73011020 .................. 934 73011022 .................. 934 73013809.................. 332 73021862.................. 892 73024508.................. 332 73026726.................. 964 73026727.................. 964 73028573.................. 332 73028862.................. 332 OEM PRE.OEM PRE.OEM PRE.OEM PRE. 124UNIVERSAL JOINTS REFERENCE 397 UNIVERSAL JOINTS REFERENCE 73038633.................. 893 73039559.................. 898 73040372.................. 793 73040377.................. 793 73044128.................. 892 73044617.................. 899 73060000...................911 73066875.................. 550 73067737.................. 905 73073809.................. 332 73107487.................. 963 73111401 .................. 905 73122595.................. 963 73134821.................. 905 73140006................ 927B 73551R93 ................. 560 7372959.................... 536 74289R91 ................. 330 74498505.................. 963 74762487.................. 452 74905112 .................. 549 74906478.................. 994 74906479.................. 452 74984504.................. 452 74984505.................. 994 74987664.................. 452 74991328.................. 541 74993479.................. 929 74993479.................. 996 751762C91 ............... 359 75351R93 ................. 560 753931R91 .............534G 76002601.................. 905 76002604................ 927B 76179097.................. 338 77372959.................. 536 77979R91 ................. 507 78013656.................. 540 78013657.................. 969 78013657................ 927B 78019R91 ................. 522 78020R91 ................. 508 7806140..................534G 7809057.................... 646 7809156.................... 604 7810416............... 530-10 7814308.................... 604 7815053.................... 889 7815848.................... 606 7816006.................... 604 7825802.................... 626 7825819.................... 429 7826048.................... 369 7828953.................... 606 7833892..................534G 7834387.................... 331 7840893.................... 429 7842007.................... 429 7846740............... 530-10 7849090.................... 369 79557R92 ................. 581 7EQ7039 .................. 332 7L1Z4635A ............... 331 8013656.................... 540 8013657.................... 969 8122993.................... 365 8124589.................... 371 8126613.................... 369 8126614.................... 369 8126636..................315G 8126637.................... 365 8126638.................... 371 8126765.................... 340 8127332.................... 369 8130296.................... 647 8130297.................... 369 8130298.................... 379 8130303.................... 607 8130750.................... 380 8133519.................... 340 8269030..................315G 8280902.................... 371 8280920.................... 371 830862M91............... 995 830962M91............... 995 835501M91............... 964 835501M918K .......... 964 835512M91.............534G 835727M91............... 330 835771M91............... 338 835771M91338......... 338 835790M91............... 880 835799M91............... 880 835991M91............... 964 836413M91............... 905 836616M91............... 905 836664M91............... 563 836666M91............... 574 836666M92............... 574 836667M91............. 927B 836668M91............. 927B 836775M91............... 574 836775M92............... 574 836776M91............... 570 836776M92............... 570 836891M91............... 861 836947M91............... 905 836948M91............... 905 837372M91............... 905 840302M92............... 508 840303M92............... 507 840655M91............... 856 840665M91............... 856 840824M91............... 861 840824M92............... 861 840830M91............... 853 840899M91............... 964 840899M92............... 964 841193M91 ............... 861 841193M92 ............... 861 841235M91............... 889 841236M91............... 995 841237M91............... 880 841603M91............... 995 841604M91............... 880 851631R91 ............... 545 851632R91 ............... 544 85351R91 ................. 560 866785R91 ............... 572 867635C91 ............... 358 869620R91 ............... 374 870638R91 ............... 783 871280R91 ............... 505 87369C1 .............. 344AG 875952C91 ............... 905 ................. 905 875953C91 ............... 923 878624C91 ............... 330 881908C91 ............... 968 886759R91 ............... 369 886890R91 ............... 331 886919R91 ............... 330 8871795.................... 570 88934794.................. 351 88935919.................. 351 88936232.................. 460 88964413.................. 330 88965767.................. 424 88982758................ 331A 89029266................437G 89029267.................. 341 89029270.................. 341 89029277................514G 89029278.................. 240 89029281.................. 398 89029282.................. 386 89029283...................411 89029286.................. 371 89029287.................. 434 89029288.................. 354 89029289.................. 369 89029290................534G 89029291.................. 232 89029292.................. 235 89029293.................. 280 89029294.................. 317 89029295.................. 355 89029296.................. 377 89029297.................. 254 89029298.................. 387 89029299................315G 89029300.................. 254 89029301.................. 353 89029302.................. 246 89029303.................. 379 89029304.................. 436 89029305.................. 231 89029306.................. 316 89029307.................. 365 89029308.................. 372 89029309.................. 348 89029310.................. 378 89029313.................. 429 89029318.................. 235 89029320.................. 248 89029323.................. 254 89029327.................. 280 89029347.................. 285 89029348.................. 290 89029350.................. 344 89029352.................. 380 89029356.................. 393 89029359.................. 429 89029364.................. 458 89029367.................. 383 89029368.................. 330 89029369.................. 374 89029372............. 329-10 89029374............. 331-10 89029375............. 360-10 89029376............. 437-10 89029377............. 530-10 89029378............. 534-10 89029380............. 492-10 89029389.................. 617 89029390.................. 606 89029394.................. 607 89029408................628C 89029412.................. 338 89029413.................. 838 89029420.................. 351 89029439.................. 475 89029448.................. 358 89029578................ 1577 89029580................ 1581 89029732.................. 882 89030051................ 1877 89040243................355C 89040245................355C 89049290.................. 225 89049291.................. 295 89049301................231C 89049302................330C 89049303................331C 89049304................354C 89049305................355C 8943262730.............. 383 8943355890.............. 383 8943355891.............. 383 8953000029.............. 369 896057C1 ................. 793 8970718110 .............. 383 8970808970.............. 383 8970808971.............. 383 899392R91 ............... 359 8BS125060 ............... 386 8BS225060 ............... 384 8BS225060A............. 384 8BS25060 ................. 386 ................ 330 91173316 .................. 398 913774R91 ............... 351 921918C1 ................. 963 925395C1 ................. 572 925397C91 ............... 570 929370C91 ............... 928 93326C1 ................... 968 9373006090.............. 340 OEM PRE.OEM PRE.OEM PRE. OEM PRE. 125UNIVERSAL JOINTS REFERENCE 398 UNIVERSAL JOINTS REFERENCE 94021281.................. 341 94027724.................. 341 94027819.................. 383 94034938.................. 462 94046890.................. 382 94051065.................. 461 94059482.................. 358 94238930.................. 383 94326273.................. 383 94332683.................. 383 94335589.................. 383 94376373.................. 382 94479054.................. 383 94772179.................. 331 96058353.................. 398 96063533.................. 398 965620R91 ............... 428 965621R91 ............... 432 965920R91 ............... 428 967379R91 ............... 331 968894R91 ............... 899 97020279.................. 369 97029526.................. 383 97071811 .................. 383 97071812.................. 383 97080505.................. 382 97081330.................. 330 97180697.................. 383 97182165.................. 369 97185603.................. 369 974180R93 ............... 335 974446R1 ................. 331 974499R91 ............... 340 975663R91 ............... 338 97714891.................. 460 9813973.................... 344 983268R91 ............... 861 983922R91 ............... 341 9929086.................... 370 A182456 ................... 905 A182457 ................... 482 A182458 ................... 928 A281868 ................... 332 A8Q7039A ................ 332 A9LY4635A ............... 369 AA26145 ................. 1501 AC15878................... 888 AD10091E ................ 340 AE10091 ................... 983 AE10091E ................ 983 AE11027 ................... 507 AE11027E ................. 507 AE11033W ................ 880 AE14978E ................ 561 AE21122 ................... 964 AE22753 ................... 880 AE23516 ................... 964 AE23716 ................... 995 AE26238 ................... 861 AE26884 ................... 880 AE30034 ................... 889 AE46187 .............. 341AG ................. 369 ................. 351 ............... 351 ................. 570 ............ 344AG ................ 570 .................. 570 ................ 861 .................. 338 ................... 861 ................... 359 .................. 330 ................... 861 AJ12823E ................. 983 ................... 983 ................... 983 ................... 861 ................ 507 AJ9907N ................... 856 AL20182 ................... 861 AL34709 ................... 812 AL4564N................... 522 AL55941 ................... 451 AL55943 ................... 331 AL64126 ................... 813 AL64127 ................... 813 AL65195 ................... 451 AM1117E .................. 861 AM1861E ................531G AM1862E .................. 535 AM2568E .................. 536 AM2854E .................. 964 AM2871E .................. 507 AM3014E .................. 995 AM3025E ................534G AM3062E .................. 536 AM37184 .................. 338 AM39093 .................. 995 AM67184 .................. 535 AMX46117 ................ 540 AN15327.................534G AN15327N ..............534G AN172734................. 369 AN192685................. 331 AN30706................... 951 AN30706N ................ 951 AN30893N ................ 508 AN32800................... 369 AN32803................... 951 AN32803N ................ 951 AOT7039A ................ 331 AP21678 ................... 983 ................ 880 AQX33323 ................ 983 AR21101R ................ 861 AR29054R ................ 581 AR29584R ................ 783 AR29699R ................ 536 AR37097................... 894 AR84046................... 482 AR90543................... 482 AR95974................. 927B AT105020 ................. 231 AT108006 ................. 280 AT114511 .................. 358 AT115918 ................. 905 AT141792 ................. 330 AT147449 ................. 354 AT149826 ................. 905 AT149827 ............... 927B AT149833 ................. 968 AT1517338 ............... 968 ................. 582 AT23096 ................... 896 AT25144 ................... 905 AT26446 ................... 968 AT27353 ................. 927B AT27787 ................... 358 AT29361 ................... 497 AT29362 ................... 513 AT33511 ................... 968 AT36353 ................... 574 AT36356 ................... 574 AT36360 ................... 550 AT42404ED .............. 358 AT43767 ................... 484 AT44365 ................... 563 AT49181 ................... 427 AT54901 ................... 379 AT55470 ................... 928 AT57090 ................... 574 AT58332 ................... 280 AT59126 ................... 896 AT59127 ................... 894 AT64485 ................... 471 AT73427 ................... 471 AT73775 ................... 905 AT74268 ................... 896 AT74269 ................... 894 AT75226 ................... 330 AT76183 ................... 331 ................ 581 ................ 964 AV12520V ................. 928 AV12521 ................... 582 AV15225B ................. 895 AW13174 .................. 861 AW18242 .................. 338 AW23611 .................. 814 AW24430 .................. 351 AW24688 .................. 817 AW25945 ............. 344AG AXMT1972S ............. 853 AZ12684 ................... 816 AZ21542 .............. 341AG AZ28866 .............. 341AG AZ32226 ................... 813 B2Q7039A ................ 332 B2TZ4635A............... 332 B3TZ4635A............... 560 B3TZ4635B .............. 560 B4TZ4635A............... 568 B4TZ4635B .............. 569 B4TZ4635C .............. 563 B4TZ4635D .............. 570 B4TZ4635E .............. 574 B4TZ4635F............... 353 B4TZ4635G .............. 569 .............. 563 B4TZ4635K .............. 574 B5A7039 ................... 508 B5A7039A................. 508 B5A7042A................. 507 B5AZ4635A .............. 508 B5AZ4635B .............. 507 B5AZ7039A .............. 508 B5T7039A ................. 331 B5TZ4635A............... 331 B6D7039A ................ 369 B6S7039A................. 369 B6T7039A ................. 330 B6TZ4635 ................. 330 B6TZ4635A............... 369 B6TZ4635B .............. 330 B6TZ4635C .............. 505 B7A7039A................. 369 B7AZ4635A .............. 369 B7S7039A................. 369 .............. 581 ............. 783 ............. 581 ............. 783 B9A7039A................. 505 B9AZ4635A .............. 505 B9TT4724A............... 353 B9TZ3249A............... 365 BC3Z4635A .............. 331 C0DZ4635A ............514G C0DZ7039A ............514G C1AA4724A .............. 429 C1AA4724B .............. 430 C1AZ4635A .............. 430 C1AZ4635C .............. 429 C1AZ4635D .............. 430 C1TT4724A .............. 351 C1TZ4635A .............. 351 C1TZ4635B .............. 353 ............514G C1VV4997A .............. 369 C2SA4724A .............. 431 C2SAZ4635A ............ 431 C3AA4635A .............. 429 C3AA4635B .............. 430 C3AZ4635A .............. 429 C3AZ4635B .............. 430 C3AZ4635C .............. 369 C3AZ4635D .............. 430 C3AZ4635E .............. 429 C3AZ4635F .............. 430 .............. 434 C3AZ4635J............... 429 C3AZ4635K .............. 430 C3AZ4635M ............. 434 C3DZ4635A ............514G C3SZ4635A .............. 429 C3TZ3815A .............. 861 OEM PRE.OEM PRE. OEM PRE. OEM PRE. 126UNIVERSAL JOINTS REFERENCE 399 UNIVERSAL JOINTS REFERENCE ............514G ............514G C3VY4782A .............. 615 C3VY4997A .............. 354 C4AZ4635A .............. 581 C4SZ4635A .............. 354 C4SZ4635B .............. 354 C4TA4635A .............. 369 C4TA4635B .............. 570 C4TA4635E .............. 563 .............. 574 C4TA4635J ............... 783 C4TA4724A .............. 369 C4TZ4635A .............. 369 C4TZ4724A .............. 369 C4VW4635A ............. 355 C5DZ4635A .............. 498 C5DZ4635B .............. 507 C5TZ3815A .............. 861 C5TZ4635A .............. 423 C5TZ4635B .............. 427 C5TZ4635C .............. 369 C5TZ4635D .............. 369 C5TZ4635E .............. 331 C5TZ4635F .............. 353 C5TZ4635G .............. 427 ............514G ............514G C6TZ3249A .............. 365 C6TZ3815A .............. 861 C6TZ3815B .............. 861 C6TZ4635................. 333 C6TZ4635A .............. 497 C6TZ4635C .............. 369 C6TZ4635E .............. 359 C6TZ4635F .............. 334 C6TZ4635G .............. 333 .............. 513 C6TZ4635J ............... 359 C6TZ4635K .............. 334 C6TZ4635L ............... 333 C7TZ4635A .............. 335 C8SZ4635A ............534G C8SZ4A031 .............. 604 C9TZ4635A .............. 354 C9TZ4635B .............. 379 C9TZ4782A .............. 607 C9TZ4784A .............. 647 CAR107625 .............. 344 CAR116859 .............. 369 CAR96867 ................ 280 CBPN3550A ............. 861 CBPN3550B ............. 861 CTBA18310 .............. 340 D143004 ................... 456 D144306 ................... 331 .............. 335 D1TZ3249A .............. 895 D27Z4635A............... 384 ........... 581 ........... 574 ........... 570 ........... 783 .............. 381 .............. 335 D2TZ4782A .............. 607 D2X2202................... 508 D2X2203................... 452 D3AZ4529A ......... 534-10 D3AZ4529B ......... 534-10 D3AZ4529C ......... 534-10 .............. 570 .............. 574 .............. 581 .............. 783 D3TZ3249A .............. 371 D3TZ4635A .............. 333 D3TZ4635B .............. 334 .............. 568 .............. 560 D4NN4N167A ........... 330 D740028 ................... 370 D8TZ3249A .............. 374 ......... 329-10 ......... 330-10 ......... 329-10 ......... 330-10 .............. 358 .............. 376 D9OZ4635A ............534G D9TZ4782A .............. 608 D9TZ4784A .............. 648 E0A7039 ................... 344 E0WY4782A ............. 627 E1NN3B413AB ......... 813 .............. 861 E3TZ4635A............... 466 E3TZ4635B ............437G E3TZ4782A............... 609 E3TZ4784A............... 649 E3TZ4A254A ....... 437-10 ......... 331-10 E73Z4249A ............... 240 .............. 476 .............. 475 E7TZ4635A............... 434 E7TZ4635B ............534G E7TZ4635C .............. 355 E7TZ4635D .............. 331 E83Z4249A ............... 240 .............. 478 E8LY4784A ............... 647 E8TZ4635A............... 330 E9SZ4635W ............. 369 E9SZ4635Z .............. 354 E9TZ4635A............... 434 E9TZ4635B .............. 430 F03Z4635A .............437G F1TZ4635A ............... 369 F1TZ4635B............... 354 F1TZ4635C .............. 369 F1TZ4782A ............. 628F F2AZ4635A............... 369 F2AZ4635B .............. 354 F2AZ4635B .............. 430 F2AZ4635C .............. 354 F2AZ4635D .............. 434 F2TZ4635A ............... 430 F2TZ4635B............... 354 F2TZ4635C .............. 434 F2TZ4635E............... 330 F3TZ4635A ............... 331 .............. 460 F5TZ4635A ............... 331 F6ZZ4635A ............... 354 F6ZZ4635AA ............ 354 ............ 876 F81Z3249AA............. 374 F81Z4635AB ............ 330 F81Z4635BB ............ 331 F81Z4635CA ............ 351 FEX1707................... 570 ................. 880 ................. 995 G8T18397................. 331 GP18397 .................. 369 GPW18397 ............... 369 ................... 964 ................... 338 ................... 369 ................... 331 ................... 338 ................. 1501 ................... 369 ................... 995 ................... 351 J3203992 .................. 507 J3208473 .................. 369 J3233715 .................. 319 J3240553 ............. 437-10 J8126613 .................. 369 J8126614 .................. 369 J8126636 ................315G J8126637 .................. 365 J8126638 .................. 371 J8130296 .................. 647 J8130303 .................. 607 J8130750 .................. 380 JLM9639 ................... 330 K260189 ................... 231 K262161 ................... 344 K956331 ................... 280 K956438 ................... 369 K965331 ................... 280 LB32548 ................... 452 LD44610A ................. 369 M09089251............... 397 MA126433 ................ 398 MB000390 ................ 398 MB000391 ................ 398 MB000393 ................ 398 MB000776 ................ 399 MB000826 ................ 399 MB000827 ................ 398 MB000948 ................ 399 MB154261 ................ 399 MB154485 ................ 399 MC834855 ................ 450 MD2683L .................. 369 MEK7039A................ 508 MEK7042A................ 507 MFK7039 .................. 369 MFK7039A ................ 369 MFK7039B................ 369 MG139842 ................ 338 MIK7039A ................. 508 MR196899 ................ 398 MR196900 ................ 399 MR232151 ................ 450 MST00024 ................ 398 MST05012 ................ 398 MSTOOO24 .............. 398 N09089251 ............... 386 ND1915D .................. 861 O1T7039................... 331 O1Y7039 .................. 369 R2X1972.................534G R7X7352.................531G R7X7355.................534G R7X7356.................531G RE15546................... 351 RE37355................... 351 RE40111 .................927B RE40112 ................... 928 RE40113 ................... 963 RTC3458 .................. 344 RTC4587 .................. 344 S105547 ................... 899 S112393 ................... 899 S201007 ................... 369 S239994 ................... 351 S240058 ................... 330 S300313 ................... 358 S300315 ................... 475 S300904 ................... 563 S301026 ................... 369 SB5398695 .............514G SBA518120120 ........ 410 SFD17201T2 ............ 574 SFD901538T2 .......... 783 TB94402 .................514G TGAA4635A.............. 560 TVAA4635A .............. 569 TVC100010 .............. 344 TWAA4635A ............. 563 TWAA4635B ............. 574 TWAA4635C ............. 568 TWAA4635D ............. 570 .................. 581 VTA3127 ................... 861 VTA3227 ................... 861 XAC5351E ..............534G XAG2230E................ 507 ............. 861 XAL5101N ................ 508 XAW70210A ............. 536 XAW70220A ............. 928 XAW70226A ............. 783 OEM PRE.OEM PRE. OEM PRE. OEM PRE. 127UNIVERSAL JOINTS REFERENCE 400 UNIVERSAL JOINTS REFERENCE ............. 783 XAW8055A ............... 570 XAW9153A ............... 536 XAW9525A ............... 581 XD500818................. 332 XL512825 ................. 369 XX18946 ................... 951 XX18947 ................... 550 XX71446 ................... 581 XY501497 ................. 369 Z1C18397B .............. 369 ZA105853 ............ 331AG ZA105879 ............ 331AG ZA210334 ............ 344AG ZP0501205345 ......... 813 ZP0501206060 ......... 451 ZP7029457405 ......... 451 ZZL022515 ............... 371 ZZL025060 ............... 369 ZZL025748 .......... 437-10 ZZL125060 ............... 369 ZZL225060 ............... 369 ZZL225060A ............. 369 ZZLO25022 .............. 647 ZZM025060A ............ 434 ZZM125060 .............. 369 ZZP025060 ............... 354 ZZP025060A............. 354 OEM PRE. 128UNIVERSAL JOINTS REFERENCE NOTES APPLICATION GUIDE ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 130UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2019 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Escalade ESV Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Chevrolet Colorado Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Express 2500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Silverado 1500 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Suburban Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Suburban 3500 HD Front Shaft All Joints AWD Inside Lock Rings 235 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Ford E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 131UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2019 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 132UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2019 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 133UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2019 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 GMC Canyon Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Yukon XL Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Toyota Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 134UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2019 Position Application Attributes Application Notes Part NumberQty Toyota Tundra continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2018 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Escalade ESV Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Chevrolet Colorado Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Express 2500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Silverado 1500 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Suburban Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 5 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 135UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Suburban 3500 HD Front Shaft All Joints AWD Inside Lock Rings 235 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Ford E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 6 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 136UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 7 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 137UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Transit-150 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 8 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 138UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Ford Transit-150 continued Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Transit-250 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Transit-350 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Transit-350 HD Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 GMC Canyon Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 9 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 139UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty GMC Yukon Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Yukon XL Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Jeep Wrangler JK Front Axle at Wheels Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Nissan NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 10 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 140UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; 2 Joint Driveshaft 351A 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 11 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 141UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2018 Position Application Attributes Application Notes Part NumberQty Ram 4500 continued Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 12 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 142UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Escalade ESV Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Chevrolet Colorado Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Express 2500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Silverado 1500 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Suburban Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Suburban 3500 HD Front Shaft All Joints AWD Inside Lock Rings 235 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Ford E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 13 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 143UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 14 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 144UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 15 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 145UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Transit-150 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Transit-250 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Transit-350 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 16 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 146UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Ford Transit-350 continued Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Transit-350 HD Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 GMC Canyon Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Yukon XL Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 17 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 147UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Axle at Wheels Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Nissan NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 18 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 148UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Ram 2500 continued Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; 3 Joint Driveshaft 351A 2 3500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 19 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 149UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2017 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 2016 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 20 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 150UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Escalade ESV Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Chevrolet Colorado Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 21 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 151UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Suburban 3500 HD Front Shaft All Joints AWD Inside Lock Rings 235 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 22 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 152UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Ford E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 23 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 153UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 24 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 154UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Transit-150 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Transit-250 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 25 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 155UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Ford Transit-350 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Transit-350 HD Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 GMC Canyon Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 26 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 156UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Savana 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 27 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 157UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Yukon XL Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Jeep Wrangler Front Axle at Wheels Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Nissan NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 28 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 158UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Ram 1500 continued Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; 3 Joint Driveshaft 351A 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 29 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 159UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Ram 3500 continued Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 30 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 160UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2016 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2015 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 31 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 161UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade ESV continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Chevrolet Colorado Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 32 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 162UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Ford E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 33 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 163UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 34 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 164UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 35 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 165UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Mustang Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transit-150 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Transit-250 Rear Shaft All Joints 102 () Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 () Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 () Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Transit-350 Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 36 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 166UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Ford Transit-350 continued Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Transit-350 HD Rear Shaft All Joints 102 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 331 3 Rear Shaft All Joints 101 () Single Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 331 2 Rear Shaft All Joints 101 () Single Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 () Single Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 330 2 Rear Shaft All Joints 102 () Dual Rear Wheels; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 330 3 Rear Shaft All Joints 102 () Dual Rear Wheels; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 () Dual Rear Wheels; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 GMC Canyon Rear Shaft All Joints 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 37 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 167UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Savana 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 38 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 168UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Yukon XL Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Jeep Wrangler Front Axle at Wheels Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 39 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 169UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 40 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 170UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Nissan Xterra continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; 2 Joint Driveshaft 351A 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 41 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 171UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Ram 3500 continued Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 42 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 172UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2015 Position Application Attributes Application Notes Part NumberQty Toyota Sequoia continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 43 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 173UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 44 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 174UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 45 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 175UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Ford E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 46 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 176UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 47 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 177UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 48 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 178UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Mustang Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 GMC Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 49 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 179UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Savana 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 50 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 180UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty GMC Sierra 3500 HD continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 51 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 181UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 52 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 182UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 53 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 183UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.4L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; 3 Joint Driveshaft 351A 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 54 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 184UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Ram 3500 continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 55 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 185UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Toyota Sequoia continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 56 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 186UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2014 Position Application Attributes Application Notes Part NumberQty Toyota Tundra continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 2013 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 57 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 187UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 continued Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 58 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 188UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 59 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 189UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Ford E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 60 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 190UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 61 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 191UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 62 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 192UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Mustang Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 GMC Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 63 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 193UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Savana 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 64 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 194UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 65 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 195UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 continued Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Jeep Wrangler Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 66 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 196UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Nissan Armada continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 67 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 197UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Nissan Titan continued Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 68 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 198UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Ram 2500 continued Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Front Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Front Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Front Shaft All Joints 102 (1,2,3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 101 (1,2) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330A 2 Rear Shaft All Joints 102 (1,2,3) 5.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330A 2 Rear Shaft All Joints 101 (1,2) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 Rear Shaft All Joints 101 (1,2) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 6.7L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Suzuki Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 69 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 199UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 70 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 200UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2013 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 2012 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 71 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 201UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade EXT continued Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 72 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 202UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 73 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 203UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 74 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 204UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Ford E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 75 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 205UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 76 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 206UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 77 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 207UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 GMC Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 78 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 208UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 79 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 209UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Savana 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 80 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 210UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty GMC Sierra 3500 HD continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 81 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 211UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Jeep Wrangler Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints 225 (1,2) Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints 225 (1,2) Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) Unlimited Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Unlimited Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 82 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 212UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Lincoln Navigator continued Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 NV1500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331A 3 NV2500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 NV3500 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross 331A 3 Rear Shaft All Joints 102 (1,2,3) 5.6L; RWD Standard Grade; Grease Fitting in Cross 330A 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 83 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 213UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder continued Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 84 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 214UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Ram 1500 continued Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 3500 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade 351A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.960" Outside Lock-Up 358A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 85 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 215UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Ram 4500 continued Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 Suzuki Equator Rear Shaft All Joints 235 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 122 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 122 (4,6) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 235 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 86 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 216UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Toyota Sequoia continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 87 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 217UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2012 Position Application Attributes Application Notes Part NumberQty Toyota Tundra continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2011 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 88 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 218UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 89 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 219UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 90 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 220UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 91 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 221UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ford E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 92 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 222UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 F-250 Super Duty Front Shaft Front Joint 4WD Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 331 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 93 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 223UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 94 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 224UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Wide Track Front Axle 374 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross; w/ Standard Front Axle 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 95 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 225UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Savana 4500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 96 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 226UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 97 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 227UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty GMC Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 98 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 228UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Jeep Wrangler Front Wheels All Joints 225 (1,2) 70th Anniversary Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 70th Anniversary Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints 225 (1,2) Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) Unlimited 70th AnniversaryStandard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Unlimited 70th AnniversaryStandard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints 225 (1,2) Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) Unlimited Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) Unlimited Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints AWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints AWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 99 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 229UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Lincoln Navigator continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mazda Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) Grease Fitting in Cross; Performance Grade 280 2 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 100 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 230UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 101 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 231UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 2500 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 3500 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade 351A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.960" Outside Lock-Up 358A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 102 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 232UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Ram 4500 continued Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft358 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft358 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft358 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 358 3 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Suzuki Equator Front Shaft Front Joint 235 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 122 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 235 (3) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 280 1 Front Shaft Front Joint 122 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 280 1 Front Shaft Rear and Center Joint 235 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 2 103 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 233UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Suzuki Equator continued Front Shaft Rear and Center Joint 235 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 122 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 235 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 122 (4,6) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 235 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 104 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 234UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2011 Position Application Attributes Application Notes Part NumberQty Toyota Sequoia continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 105 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 235UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 106 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 236UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 107 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 237UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 3500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 108 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 238UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 3500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 Ram 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Ram 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 111 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 239UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 1 110 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 240UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 3500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 479 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 Ram 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Ram 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 111 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 241UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Dodge Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 112 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 242UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 F-150 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Front Shaft All Joints 112 (1,2) AWD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) AWD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 F-250 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 113 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 243UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 114 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 244UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 115 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 245UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 116 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 246UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Savana 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Sierra Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 117 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 247UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 118 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 248UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Jeep Wrangler Front Wheels All Joints 225 (1,2) 4WD; Islander Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Islander Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Mountain Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Mountain Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 119 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 249UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sport Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sport Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Kia Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Lexus GX460 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mazda B4000 Front Shaft All Joints 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; Universal Style 260 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Universal Style; Incl. Inside and Outside Lock Rings 433 2 120 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 250UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Mazda Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 121 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 251UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 122 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 252UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Nissan Xterra continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Suzuki Equator Front Shaft Front Joint 235 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 122 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 122 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 280 1 Front Shaft Front Joint 235 (3) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 280 1 Front Shaft Rear and Center Joint 122 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 235 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 122 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 235 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 122 (4,6) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 123 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 253UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Toyota FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 124 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 254UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2010 Position Application Attributes Application Notes Part NumberQty Toyota Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2009 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 125 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 255UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade EXT continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 126 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 256UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 127 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 257UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 4500 Rear Shaft All Joints 101 (1,2) Standard Grade 351A 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 128 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 258UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 129 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 259UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chrysler Aspen Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 130 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 260UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 131 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 261UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 3500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 132 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 262UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Ram 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Ram 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 133 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 263UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 F-150 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 134 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 264UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 F-250 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 135 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 265UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 136 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 266UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 330 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 295A 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 137 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 267UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 138 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 268UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty GMC Envoy continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 139 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 269UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Savana 4500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft 351A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft 351A 2 Sierra Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 140 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 270UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 141 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 271UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 142 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 272UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; X-S Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; X-S Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Kia Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX350 Rear Shaft All Joints AWD 349 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 143 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 273UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Mazda B2300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 144 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 274UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Mitsubishi Raider continued Rear Shaft All Joints RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 145 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 275UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Saab 9-7x Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft Front Joint 109 (3) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) Grease Fitting in Cross; Performance Grade 232 1 146 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 276UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Suzuki Equator Front Shaft Front Joint 235 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 122 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 369 1 Front Shaft Front Joint 122 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 280 1 Front Shaft Front Joint 235 (3) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 280 1 Front Shaft Rear and Center Joint 122 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 2 Front Shaft Rear and Center Joint 235 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 122 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 235 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 122 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 122 (4,6) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 235 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 147 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 277UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Toyota Land Cruiser continued Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 148 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 278UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2009 Position Application Attributes Application Notes Part NumberQty Toyota Tundra continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2008 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 5.3L; 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 5.3L; 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 149 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 279UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche continued Rear Shaft All Joints 101 (1,2) 5.3L; RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.3L; RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 150 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 280UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 continued Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 151 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 281UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 152 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 282UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 153 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 283UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chrysler Aspen Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 154 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 284UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Dodge Durango continued Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 225 (5) 4WD Standard Grade; Grease Fitting in Cross; w/ Double Cardan CV at Transfer Case 331A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 295A 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 155 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 285UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Ram 3500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 156 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 286UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Ram 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Ram 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331A 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 821 2 Rear Shaft All Joints 101 (1,2) 4 X 2 Standard Grade; 2 Joint Driveshaft; 4.185" Outside Lock-Up351A 2 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up351A 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; 3 Joint Driveshaft; 4.185" Outside Lock-Up351A 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; 4.185" Outside Lock-Up 351A 3 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 157 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 287UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 158 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 288UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 F-150 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Front Shaft All Joints 112 (1,2) AWD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) AWD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 F-250 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 159 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 289UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 F-250 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 160 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 290UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 F-350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 161 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 291UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 162 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 292UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 163 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 293UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty GMC Envoy continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 164 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 294UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Sierra Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sierra 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 165 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 295UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 166 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 296UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 167 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 297UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 i-290 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 i-370 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 168 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 298UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Isuzu i-370 continued Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Jeep Wrangler Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 2 Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Kia Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX570 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX350 Rear Shaft All Joints AWD 349 2 169 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 299UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 171 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 300UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 171 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 301UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 172 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 302UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder continued Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Saab 9-7x Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft Front Joint 109 (3) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross 331 1 173 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 303UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Saab 9-7x continued Rear Shaft Rear Joint 109 (4) Grease Fitting in Cross; Performance Grade 232 1 Suzuki Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 174 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 304UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2008 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 2007 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 175 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 305UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Avalanche Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 5.3L; 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 5.3L; 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 5.3L; RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.3L; RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 176 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 306UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 177 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 307UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 2500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 178 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 308UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Silverado 1500 Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 179 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 309UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 Classic continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 180 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 310UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 Classic continued Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Classic Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351A 1 181 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 311UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Silverado 2500 HD Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Silverado 3500 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Silverado 3500 Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 182 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 312UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 Classic continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Silverado 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 183 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 313UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 2500 continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 3 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 184 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 314UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chrysler Aspen Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 185 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 315UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 225 (5) 4WD Standard Grade; Grease Fitting in Cross; w/ Double Cardan CV at Transfer Case 331A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 295A 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 186 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 316UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331A 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter; 4.960" Outside Lock-Up 358A 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 187 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 317UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford E-250 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 231 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 331 2 188 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 318UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 189 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 319UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 F-250 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 F-250 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 190 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 320UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 191 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 321UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 192 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 322UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Ford F-550 Super Duty continued Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 109 (3) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 193 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 323UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) AWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 194 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 324UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Sierra Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 195 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 325UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra continued Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 196 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 326UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 197 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 327UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 198 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 328UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 Classic continued Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 199 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 329UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Sierra 2500 HD Classic Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Sierra 3500 Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 201 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 330UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Lock-Up 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 1.375" Bearing Cap Diameter 351A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Sierra 2500 HD Classic Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Sierra 3500 Classic Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 201 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 331UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 3500 Classic continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Sierra 3500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade 351A 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade 351A 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 330 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade 295A 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 202 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 332UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 3 203 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 333UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 3 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 i-290 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 i-370 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 204 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 334UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Isuzu i-370 continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Wrangler Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited Sahara Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; Unlimited X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Sealed Unit; 2.187" Inside Lock-Up 371 2 Front Wheels All Joints 225 (1,2) 4WD; X Standard Grade; Grease Fitting in Bearing Cap; 2.187" Inside Lock-Up 377 2 Front Wheels All Joints Rubicon Standard Grade; Sealed Unit 367 1 205 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 335UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Front Wheels All Joints Unlimited Rubicon Standard Grade; Sealed Unit 367 2 Kia Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX350 Rear Shaft All Joints AWD 349 2 Lincoln Mark LT Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Exc. Stake Type331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Replacement for Stake Type346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Replacement for Stake Type346 2 Navigator Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 206 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 336UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 207 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 337UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Mitsubishi Raider continued Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 208 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 338UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 209 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 339UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Nissan Xterra continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Saab 9-7x Front Shaft Front Joint 109 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 Suzuki Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 FJ Cruiser Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 210 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 340UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2007 Position Application Attributes Application Notes Part NumberQty Toyota Land Cruiser continued Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Tundra Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 211 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 341UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Avalanche 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 212 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 342UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Transmission to Axle RWD 270 1 Avalanche 2500 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 213 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 343UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Equinox Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 2 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 214 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 344UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 SSR Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 215 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 345UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 216 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 346UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 217 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 347UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 continued Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 218 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 348UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Trailblazer EXT Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 219 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 349UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Laramie Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Laramie Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 220 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 350UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 225 (6,7,8) 4WD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD; SLT Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD; SLT Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD; ST Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; ST Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Sport Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Sport Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Sport Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Sport Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Sport Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Sport Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD; TRX4 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; TRX4 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD; TRX4 Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; TRX4 Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD; TRX4 Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 221 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 351UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD; TRX4 Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD; Laramie Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD; ST Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; ST Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; Sport Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; Sport Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD; Sport Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; Sport Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD; Sport Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 222 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 352UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD; Sport Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) SRT-10 Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) SRT-10 Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 223 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 353UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Aluminum Driveshaft 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 232 2 Rear Shaft All Joints Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 3 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 224 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 354UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 225 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 355UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 F-250 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 F-250 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 226 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 356UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 227 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 357UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 228 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 358UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Ford F-550 Super Duty continued Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 229 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 359UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Envoy XL Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 230 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 360UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 231 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 361UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 232 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 362UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Sierra 2500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 233 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 363UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 234 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 364UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 235 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 365UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Infiniti QX56 continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 i-280 Rear Shaft Front Joint 102 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 290 1 i-350 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 236 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 366UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Isuzu i-350 continued Rear Shaft Front Joint 109 (3) Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) Performance Grade; Grease Fitting in Bearing Cap 290 1 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 TJ Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 237 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 367UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Jeep TJ continued Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Wrangler Front Shaft Front Joint 225 (3) 65th Anniversary EditionStandard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 65th Anniversary EditionGrease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Unlimited Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Unlimited Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X 65 Aniversario Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X 65 Aniversario Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 65th Anniversary EditionStandard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Unlimited Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Unlimited Rubicon Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X 65 Aniversario Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 65th Anniversary EditionStandard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 65th Anniversary EditionGrease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Rubicon Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Rubicon Grease Fitting in Cross; Performance Grade 280 3 238 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 368UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Rear Shaft All Joints 225 (6,7,8) X Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) X 65 Aniversario Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X 65 Aniversario Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Kia Sorento Rear Shaft All Joints 118 (2,3) 4WD Standard Grade; Grease Fitting in Cross 356 2 Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Freelander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 341 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX330 Rear Shaft All Joints AWD 349 2 Lincoln Mark LT Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Exc. Stake Type331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Replacement for Stake Type346 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 239 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 369UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Lincoln Mark LT continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Replacement for Stake Type346 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Exc. Stake Type331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; Replacement for Stake Type346 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 369 3 240 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 370UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Mazda Tribute continued Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 399 1 Outlander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Raider Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 241 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 371UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Mitsubishi Raider continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 125 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 125 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 242 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 372UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder continued Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Pontiac Torrent Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 243 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 373UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Saab 9-7x Front Shaft Front Joint 109 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 Suzuki Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 XL-7 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 244 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 374UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2006 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2005 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 245 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 375UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Avalanche 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Transmission to Axle RWD 270 1 Avalanche 2500 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 246 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 376UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 2500 continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 247 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 377UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Equinox Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 2 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 248 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 378UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 3500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 SSR Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 249 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 379UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 250 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 380UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 251 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 381UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 252 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 382UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer EXT Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 253 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 383UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer EXT continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 254 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 384UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD; Laramie Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; ST Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD; ST Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 255 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 385UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 101 (1,2) SRT-10 Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) SRT-10 Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Aluminum Driveshaft 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 256 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 386UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 232 2 Rear Shaft All Joints Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Club Wagon Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 257 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 387UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford E-350 Super Duty continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 258 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 388UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 259 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 389UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford Explorer Sport Trac continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 F-250 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 260 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 390UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 261 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 391UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 1 262 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 392UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 263 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 393UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) 4 X 4 Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) 4 X 4 Grease Fitting in Cross; Performance Grade 232 1 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 424 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 264 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 394UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Canyon continued Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XL Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XUV Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 265 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 395UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Savana 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 266 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 396UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 267 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 397UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 268 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 398UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Sierra 2500 HD Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 269 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 399UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 270 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 400UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 271 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 401UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Infiniti QX56 continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 TJ Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 272 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 402UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Jeep TJ continued Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Unlimited Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Unlimited Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Unlimited Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Unlimited Rubicon Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 273 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 403UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Rear Shaft All Joints 225 (6,7,8) Unlimited Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Rubicon Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Rubicon Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) X Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Kia Sorento Rear Shaft All Joints 118 (2,3) 4WD Standard Grade; Grease Fitting in Cross 356 2 Sportage Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Freelander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 341 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX330 Rear Shaft All Joints AWD 349 2 Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 274 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 404UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Lincoln Navigator continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Exc. Stake Type331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; Replacement for Stake Type346 3 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 3 Mercedes-Benz ML350 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML500 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 275 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 405UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Mercury Grand Marquis Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 223 (1,2,3) AWD Grease Fitting in Cross; Performance Grade 280 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 399 1 Outlander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Nissan Armada Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Frontier Front Shaft All Joints 235 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 369 3 Front Shaft All Joints 122 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 369 3 Front Shaft All Joints 125 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) 2.5L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) 2.5L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 276 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 406UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 101 (1,2) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) 4.0L; RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 3 Rear Shaft All Joints 101 (1,2) 4.0L; RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft All Joints 122 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 125 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 125 (4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 277 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 407UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Nissan Titan continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Saab 9-7x Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 XL-7 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 278 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 408UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2005 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Sienna Rear Shaft All Joints AWD 349 2 Tacoma Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2004 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 279 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 409UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Buick Rainier continued Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 280 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 410UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Transmission to Axle RWD 270 1 Avalanche 2500 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Colorado Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 281 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 411UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 282 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 412UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 S10 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 283 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 413UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 SSR Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 284 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 414UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 285 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 415UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 286 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 416UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 287 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 417UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 2500 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer EXT Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 288 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 418UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer EXT continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 289 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 419UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; SLT Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD; ST Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD; ST Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD; ST Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) SRT-10 Standard Grade; Grease Fitting in Cross 330 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Dana 1330 Axle 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Dana 1330 Axle 260 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 290 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 420UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Aluminum Driveshaft 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 232 2 Rear Shaft All Joints Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 291 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 421UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford E-350 Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 292 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 422UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford Excursion continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 293 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 423UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Exc. Stake Type 231 2 294 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 424UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. Stake Type 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Exc. Stake Type 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. Stake Type 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Replacement for Stake Type 346 3 F-150 Heritage Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 295 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 425UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford F-250 Rear Shaft All Joints RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-250 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 296 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 426UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 297 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 427UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Mustang Rear Shaft All Joints 101 (1,2) Base Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Base Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Base Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) GT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) GT Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) GT Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Mach I Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Mach I Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Mach I Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Grease Fitting in Cross; Performance Grade 232 2 298 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 428UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Ford Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Canyon Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 109 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front and Center Joints 102 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 2 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 109 (4) 4WD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 299 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 429UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Envoy continued Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XL Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XUV Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 300 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 430UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Safari continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Savana 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 301 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 431UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 302 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 432UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 303 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 433UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 304 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 434UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 305 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 435UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 306 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 436UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 continued Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Infiniti QX56 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Axiom Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 307 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 437UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4.7L; 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/o Selec-Trac Transfer Case 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 354 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 260 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 280 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 308 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 438UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Jeep Liberty continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 TJ Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) Sahara Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sahara Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) Sahara Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Sahara Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sahara Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sahara Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sahara Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Unlimited Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Unlimited Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 309 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 439UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sahara Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Unlimited Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sahara Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sahara Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Unlimited Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) X Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Kia Sorento Rear Shaft All Joints 118 (2,3) 4WD Standard Grade; Grease Fitting in Cross 356 2 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Freelander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 341 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 310 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 440UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Lexus RX330 Rear Shaft All Joints AWD 349 2 Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 311 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 441UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercedes-Benz ML350 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML500 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 Mercury Grand Marquis Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Marauder Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 399 1 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 Outlander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 280 2 312 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 442UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 393 1 Titan Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 3 Oldsmobile Bravada Front Shaft Front Joint 118 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 118 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 118 (2,3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 118 (2,3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 313 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 443UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Oldsmobile Bravada continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 XL-7 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Sienna Rear Shaft All Joints AWD 349 2 314 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 444UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2004 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft 369 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 1 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 1 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2003 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 315 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 445UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade ESV Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Avalanche 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 316 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 446UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 continued Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Transmission to Axle RWD 270 1 Avalanche 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C4500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 C5500 Kodiak N/A w/ Aluminum Driveshaft 351C 1 Express 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 317 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 447UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 continued Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 318 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 448UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 S10 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 SSR Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 319 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 449UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 320 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 450UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 321 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 451UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 HD continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 322 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 452UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 323 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 453UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 1500 continued Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 324 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 454UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer EXT Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 325 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 455UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 326 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 456UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross 331A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 464 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Viper Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Aluminum Driveshaft 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 232 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 E-150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 327 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 457UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford E-150 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-450 Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 E-550 Super Duty Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 328 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 458UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford Excursion continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 329 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 459UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 330 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 460UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Rear Shaft All Joints RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-250 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 331 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 461UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 332 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 462UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Mustang Rear Shaft All Joints 101 (1,2) Base Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Base Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Base Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 333 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 463UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft All Joints 101 (1,2) Equipado Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Equipado Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Equipado Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) GT Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) GT Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) GT Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Mach I Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Mach I Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Mach I Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) SVT Cobra Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints SVT Cobra 10th AnniversaryStandard Grade; Grease Fitting in Cross 331 2 Ranger Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C4500 Topkick N/A w/ Aluminum Driveshaft 351C 1 C5500 Topkick N/A w/ Aluminum Driveshaft 351C 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XL Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 334 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 464UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Envoy XL continued Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 335 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 465UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Savana 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 336 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 466UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 337 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 467UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 338 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 468UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Sierra 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 339 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 469UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter 351 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 340 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 470UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 341 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 471UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross 393 1 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Axiom Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 342 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 472UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rodeo Sport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4.0L; AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4.0L; AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4.7L; 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) 4.7L; AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 343 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 473UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/o Selec-Trac Transfer Case 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/o Selec-Trac Transfer Case 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 354 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 260 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 354 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 260 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 280 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 280 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 TJ Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sahara Standard Grade; Grease Fitting in Cross 369 1 344 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 474UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Jeep TJ continued Front Shaft Front Joint 225 (3) Sahara Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sahara Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sahara Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sahara Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 225 (3) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 225 (3) SE Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) SE Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sahara Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sahara Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Sport Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Sport Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) X AT Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) X AT Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) Rubicon Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Shaft Rear and Center Joint 225 (4,5) SE Standard Grade; Flush Type Grease Fitting in Cross 379 2 345 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 475UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Front Shaft Rear and Center Joint 225 (4,5) Sahara Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) Sport Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) X AT Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) SE Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) SE Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sahara Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sahara Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Sport Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Sport Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) X Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) X AT Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) X AT Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front Joint 225 (6) Rubicon Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 225 (6) Rubicon Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 225 (8) Rubicon Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 225 (8) Rubicon Performance Grade; Grease Fitting in Bearing Cap 290 1 Kia Sorento Rear Shaft All Joints 118 (2,3) 4WD Standard Grade; Grease Fitting in Cross 356 2 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Freelander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 341 3 Lexus GX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX300 Rear Shaft All Joints AWD 349 2 346 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 476UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 347 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 477UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercedes-Benz ML320 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML350 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML500 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML55 AMG Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 Mercury Grand Marquis Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 331 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Steel Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Marauder Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 399 1 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 348 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 478UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Mitsubishi Outlander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 393 1 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 3 Oldsmobile Bravada Front Shaft Front Joint 118 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 118 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 118 (2,3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 118 (2,3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 349 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 479UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 XL-7 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Tacoma Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft 369 2 350 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 480UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2003 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 2 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 1 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 1 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2002 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 351 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 481UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade EXT Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Avalanche 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Transmission to Axle RWD 270 1 Avalanche 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 352 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 482UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 2500 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 353 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 483UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 G30 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 S10 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 354 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 484UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings355C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 355 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 485UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 356 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 486UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 357 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 487UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 295A 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 1 358 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 488UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 359 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 489UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Trailblazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Trailblazer EXT Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 360 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 490UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Dodge Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 112 (1) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Ram 2500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 361 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 491UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 1.375" Bearing Cap Diameter 351A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 362 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 492UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Diameter 351A 3 Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 363 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 493UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 364 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 494UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-450 Econoline Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 E-550 Econoline Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 365 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 495UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford Excursion continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Explorer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 366 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 496UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford Explorer Sport Trac continued Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 367 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 497UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Rear Shaft All Joints RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 368 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 498UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-350 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 369 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 499UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 370 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 500UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Envoy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Envoy XL Front Shaft Front Joint 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 371 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 501UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 372 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 502UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings355C 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) AWD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) AWD Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings290 1 Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 373 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 503UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) AWD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 112 (3,4,5) AWD Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings355C 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 374 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 504UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; 1.063 & 1.125" Bearing Cap Diameters; Inside & Outside Lock Rings 355C 1 Sierra 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Sierra 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 375 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 505UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 330C 3 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 376 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 506UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 377 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 507UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) 8.1L; RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Honda Passport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross 393 1 Isuzu Axiom Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 378 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 508UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rodeo Sport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 411 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 411 1 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XKR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 379 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 509UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Jaguar XKR continued Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4.0L; AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4.0L; AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4.7L; 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) 4.7L; AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/o Selec-Trac Transfer Case 280 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/o Selec-Trac Transfer Case 369 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/o Selec-Trac Transfer Case 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 354 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 260 1 Rear Shaft Front Joint 225 (6) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 354 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 260 1 Rear Shaft Front Joint 225 (6) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 280 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD Standard Grade; Grease Fitting in Cross; w/ Selec-Trac Transfer Case 369 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD Grease Fitting in Cross; Performance Grade; w/ Selec-Trac Transfer Case 280 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 380 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 510UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Jeep Liberty continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Freelander Rear Shaft All Joints 223 (1,2,3) AWD Standard Grade; Grease Fitting in Cross 341 3 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Lexus LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 381 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 511UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Lexus LX470 continued Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX300 Rear Shaft All Joints AWD 349 2 Lincoln Blackwood Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 382 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 512UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercedes-Benz ML320 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML500 Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 ML55 AMG Rear Shaft Front Joint 121 (3) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 121 (3) Grease Fitting in Cross; Performance Grade 280 1 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Bearing Cap 398 1 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 383 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 513UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Nissan Frontier continued Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 393 1 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 3 Oldsmobile Bravada Front Shaft Front Joint 118 (1) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 118 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 118 (2,3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 118 (2,3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 384 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 514UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Saturn Vue Rear Shaft Center and Rear Joint 223 (2,3) AWD Standard Grade; Sealed Unit 409 1 Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 XL-7 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Tacoma Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft 369 2 385 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 515UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2002 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 1 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 1 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 386 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 516UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro continued Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 387 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 517UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 G30 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 388 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 518UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 389 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 519UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 390 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 520UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 HD continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Silverado 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 391 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 521UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 Silverado 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 392 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 522UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 continued Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 129 (1,2,3,4) RWD Grease Fitting in Cross; 4 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 393 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 523UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Dodge Dakota Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 1500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 394 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 524UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 395 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 525UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 396 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 526UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 397 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 527UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 398 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 528UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Van continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-450 Econoline Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Escape Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 399 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 529UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford Excursion continued Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 400 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 530UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford Explorer Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Sport Trac Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-100 Ranger Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 401 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 531UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Rear Shaft All Joints RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 402 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 532UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 403 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 533UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 404 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 534UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Ford F-550 Super Duty continued Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 2 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 2 Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 405 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 535UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 406 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 536UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front Joint 112 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 407 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 537UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft Front Joint 112 (3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft Front Joint 112 (3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 112 (3) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft Rear Joint 112 (5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft Rear Joint 112 (5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft Rear Joint 112 (5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 1500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 408 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 538UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sierra 2500 HD Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4.185" Outside Lock-Up 351 1 409 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 539UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Sierra 3500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 410 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 540UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 411 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 541UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 continued Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Standard Grade; Grease Fitting in Cross 330 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Performance Grade 295A 2 Rear Shaft All Joints 109 (3,4) 8.1L; 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft330C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Honda Passport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross 393 1 Isuzu Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 412 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 542UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rodeo Sport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Trooper Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 411 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 411 1 VehiCROSS Rear Shaft All Joints 109 () 4WD Standard Grade; Grease Fitting in Cross 411 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XKR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 413 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 543UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 414 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 544UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Lexus LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX300 Rear Shaft All Joints AWD 349 2 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 415 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 545UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Mazda B2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Tribute Rear Shaft All Joints 223 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 223 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade 280 3 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 416 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 546UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Mitsubishi Montero Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Bearing Cap 398 1 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 393 1 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 3 Oldsmobile Bravada Front Shaft Front Joint 127 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 127 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 417 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 547UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Oldsmobile Bravada continued Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Highlander Rear Shaft All Joints AWD 349 2 Land Cruiser Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 Sequoia Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 418 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 548UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2001 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft 369 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 2 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 1 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 2000 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 419 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 549UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 420 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 550UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 421 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 551UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K2500 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 422 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 552UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 423 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 553UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 424 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 554UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 425 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 555UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Suburban 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Suburban 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 426 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 556UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Tracker continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Dodge Dakota Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Durango Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ram 1500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 427 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 557UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 428 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 558UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 429 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 559UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 430 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 560UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 431 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 561UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Dodge Viper continued Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 E-450 Econoline Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 432 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 562UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford Excursion continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 433 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 563UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford Explorer Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-100 Ranger Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 434 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 564UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 435 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 565UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 F-350 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 436 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 566UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 437 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 567UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Ford Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 438 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 568UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 439 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 569UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 440 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 570UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 441 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 571UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 442 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 572UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon XL 1500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 443 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 573UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) RWD Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Yukon XL 2500 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Honda Passport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 393 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 444 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 574UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Isuzu Hombre Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Trooper Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 411 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 411 1 VehiCROSS Rear Shaft All Joints 109 () 4WD Standard Grade; Grease Fitting in Cross 411 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 445 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 575UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Jaguar XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XKR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 446 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 576UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Jeep TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Lexus LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX300 Rear Shaft All Joints AWD 349 2 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 447 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 577UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Lincoln Navigator continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 448 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 578UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Mercury Mountaineer continued Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 393 1 Xterra Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 260 3 449 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 579UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Nissan Xterra continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 3 Oldsmobile Bravada Front Shaft Front Joint 127 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 127 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Forester Rear Shaft All Joints AWD 349 2 Suzuki Grand Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 450 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 580UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Toyota Land Cruiser continued Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 3 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft; 2 Piece Driveshaft 369 3 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft; 2 Piece Driveshaft 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 3 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 3 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 3 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 3 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Tundra Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 116 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 451 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 581UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 2000 Position Application Attributes Application Notes Part NumberQty Toyota Tundra continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 1999 Position Application Attributes Application Notes Part NumberQty Acura SLX Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 411 1 Cadillac Escalade Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 452 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 582UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 453 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 583UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 454 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 584UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K1500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 455 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 585UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 456 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 586UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 457 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 587UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 458 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 588UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 459 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 589UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Silverado 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 460 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 590UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Dodge Dakota Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 461 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 591UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Durango Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front Joint 109 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Rear Shaft Front Joint 109 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 109 (4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters 458 1 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 462 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 592UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 463 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 593UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 464 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 594UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 465 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 595UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; 4.185" Outside Lock- Up 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 466 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 596UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 E-450 Econoline Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 Econoline Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 467 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 597UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Explorer Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 F-100 Ranger Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 468 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 598UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-100 Ranger continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Front Shaft All Joints 106 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 354 1 Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 354 1 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 354 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 260 1 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 260 1 469 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 599UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 260 1 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; 2 Piece Rear Driveshaft331 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings; 2 Piece Rear Driveshaft232 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 2 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter; 2 Piece Rear Driveshaft 260 1 470 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 600UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 1 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; 2 Piece Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 471 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 601UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 472 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 602UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-350 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 231 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 231 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 331 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 331 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 232 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 374 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 374 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 330 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 1 Piece Rear Driveshaft 295A 1 473 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 603UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Piece Rear Driveshaft 295A 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Sealed Unit 231 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Standard Grade; Grease Fitting in Cross 331 3 Front Shaft All Joints 225 (3,4,5) 4 X 4 Grease Fitting in Cross; Performance Grade 232 3 Front Wheels All Joints 225 (1,2) 4 X 4 Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 102 (1,2,3) 4 X 2 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 3 Rear Shaft All Joints 129 (1,2,3,4) 4 X 2 Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 3 Rear Shaft All Joints 225 (6,7,8) 4 X 4 Standard Grade; Grease Fitting in Cross 351 3 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft351 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft351 4 Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 474 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 604UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 475 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 605UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 476 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 606UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 477 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 607UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 478 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 608UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC K2500 Suburban continued Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 479 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 609UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC Safari continued Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Sierra 1500 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 480 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 610UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 4WD Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside & Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside & Outside Lock Rings 290 1 481 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 611UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Inside & Outside Lock Rings 355C 1 Sierra 2500 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 4.185" Outside Lock-Up 330C 1 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 482 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 612UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Honda Passport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 393 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Hombre Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 483 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 613UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Isuzu Hombre continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 411 2 VehiCROSS Rear Shaft All Joints 109 () 4WD Standard Grade; Grease Fitting in Cross 411 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 484 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 614UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 485 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 615UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Lexus LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RX300 Rear Shaft All Joints AWD 349 2 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 486 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 616UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Mazda B3000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Center of Cross 450 3 487 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 617UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Nissan Frontier Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Front Joint 127 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 127 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Rear and Center Joint 127 (2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 127 (2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Forester Rear Shaft All Joints AWD 349 2 Legacy Front AWD 349 1 Rear AWD 349 1 488 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 618UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Suzuki Grand Vitara Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Vitara Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 408 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 Tacoma Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft; 2 Piece Driveshaft 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 2 Piece Driveshaft 369 3 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1 Piece Driveshaft 369 3 Rear Shaft All Joints 108 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1 Piece Driveshaft 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 2 Piece Driveshaft 280 3 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft; 2 Piece Driveshaft 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 3 Rear Shaft All Joints 108 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 3 489 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 619UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1999 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross; 2 Piece Driveshaft 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 2 Piece Driveshaft 285 3 Rear Shaft All Joints 108 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross; 1 Piece Driveshaft 285 3 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 1998 Position Application Attributes Application Notes Part NumberQty Acura SLX Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 411 1 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 490 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 620UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 491 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 621UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 492 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 622UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K1500 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 493 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 623UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 494 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 624UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 495 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 625UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Suburban continued Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 496 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 626UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 497 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 627UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 498 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 628UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Dodge B1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dakota Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Durango Front Shaft All Joints 109 (1,2) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 109 (3) Standard Grade; Grease Fitting in Cross 316 1 Rear Shaft Front Joint 109 (3) Grease Fitting in Cross; Performance Grade 248 1 499 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 629UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Dodge Durango continued Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 109 (4) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters 458 1 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 500 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 630UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 501 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 631UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 502 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 632UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft Front Joint 101 (1) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 1 Rear Shaft Rear Joint 102 (3) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 1 Rear Shaft Rear Joint 102 (3) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 1 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Eagle Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 503 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 633UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Econoline Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 504 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 634UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Explorer Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 F-100 Ranger Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 505 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 635UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 2 506 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 636UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 507 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 637UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 508 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 638UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 509 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 639UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 510 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 640UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC C3500HD continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 511 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 641UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 512 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 642UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 513 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 643UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 514 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 644UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 515 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 645UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Honda Passport Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Infiniti QX4 Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 393 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Hombre Front Shaft Front Joint 109 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 516 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 646UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 411 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 517 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 647UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 518 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 648UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Jeep TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 209 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 344 3 Rear Shaft All Joints 209 (5,6,7) AWD Standard Grade; Grease Fitting in Cross 344 3 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Lexus LX470 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Navigator Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 519 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 649UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Lincoln Navigator continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 232 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B3000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 B4000 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 520 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 650UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 102 (1,2,3) 2.4L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 3.0L; RWD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 Frontier Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 369 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 521 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 651UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Oldsmobile Bravada Front Shaft Front Joint 127 (1) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 127 (1) Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Rear and Center Joint 127 (2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 127 (2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Forester Rear Shaft All Joints AWD 349 2 Legacy Front AWD 349 1 Rear AWD 349 1 Suzuki Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 522 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 652UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1998 Position Application Attributes Application Notes Part NumberQty Toyota T100 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 4 Joint Driveshaft 369 4 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 4 Joint Driveshaft 280 4 Rear Shaft All Joints 119 (1,2,3,4) RWD Standard Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 4 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 119 (1,2,3,4) RWD Performance Grade; Inside Lock Rings; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 4 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 1997 Position Application Attributes Application Notes Part NumberQty Acura SLX Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 523 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 653UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 524 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 654UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 525 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 655UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 526 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 656UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500HD continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K1500 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 527 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 657UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 528 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 658UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 529 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 659UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 530 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 660UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 531 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 661UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge B1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 532 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 662UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Dodge B3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 533 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 663UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 534 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 664UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 535 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 665UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft Front Joint 101 (1) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 536 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 666UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Van continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Eagle Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 537 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 667UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Econoline Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Expedition Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Explorer Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 538 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 668UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 109 (1,2) AWD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) AWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 109 (3,4) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-100 Ranger Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 F-150 Front Shaft All Joints 112 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 539 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 669UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 2 Front Shaft All Joints 109 (1,2) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 354 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 540 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 670UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 541 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 671UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 542 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 672UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 543 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 673UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft Front Joint 205 (4) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 544 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 674UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 545 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 675UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 546 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 676UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC C3500HD continued Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 547 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 677UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 548 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 678UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 549 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 679UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 550 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 680UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 551 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 681UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Honda Passport Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Infiniti QX4 Front Shaft Front Joint 109 (1) Standard Grade; Sealed Unit 446 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 393 2 Isuzu Hombre Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 552 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 682UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Jaguar XJ6 continued Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XK8 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 553 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 683UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 TJ Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 554 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 684UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Defender 90 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft Front and Rear Joints 209 (5,7) Standard Grade; Grease Fitting in Cross 344 2 Discovery Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 344 2 Front Shaft All Joints 209 (3,4) AWD Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 344 3 Rear Shaft All Joints 209 (5,6,7) AWD Standard Grade; Grease Fitting in Cross 344 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 344 2 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft344 2 Lexus LX450 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 209 (5,6,7) Performance Grade; Grease Fitting in Center of Cross 285 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 555 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 685UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Mazda B3000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 B4000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 556 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 686UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap 380 3 Mercury Cougar Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 109 (1) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 109 (1) AWD Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Montero Sport Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 1 Rear Shaft All Joints 102 (1,2,3) 2.4L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 3.0L; RWD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 280 3 557 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 687UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Nissan Pickup continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 127 (2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 Suzuki Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 558 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 688UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1997 Position Application Attributes Application Notes Part NumberQty Toyota T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 1996 Position Application Attributes Application Notes Part NumberQty Acura SLX Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 559 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 689UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 560 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 690UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 561 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 691UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 562 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 692UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 563 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 693UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Express 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Express 2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Express 3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 G30 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 564 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 694UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 565 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 695UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 566 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 696UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Suburban continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 567 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 697UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Transmission to Axle 270 1 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 568 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 698UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Transmission to Axle 270 1 Silverado Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 569 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 699UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge B1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 570 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 700UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge B2500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 571 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 701UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 572 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 702UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 573 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 703UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 3 574 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 704UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft246 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 575 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 705UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 3500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Eagle Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 576 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 706UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford Aerostar continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 577 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 707UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Econoline Super Duty Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Explorer Front Shaft Front Joint 236 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 237 (1) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 237 (1) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 236 (1) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 236 (1) AWD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 237 (1) AWD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 237 (1) AWD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 236 (1) AWD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 280 1 Front Shaft Rear and Center Joint 237 (2,3) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Front Shaft Rear and Center Joint 236 (2,3) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 Front Shaft Rear and Center Joint 236 (2,3) AWD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 Front Shaft Rear and Center Joint 237 (2,3) AWD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Rear Shaft All Joints 237 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 237 (4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 237 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 237 (4,5) AWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 237 (4,5) AWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 237 (4,5) AWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 578 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 708UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 236 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front and Center Joints 236 (4,5) AWD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 236 (6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 236 (6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 236 (6) AWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 236 (6) AWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-100 Ranger Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 579 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 709UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 580 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 710UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 581 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 711UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 582 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 712UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Ford Mustang Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Ranger Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 583 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 713UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 584 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 714UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 585 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 715UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC C3500 continued Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 G3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 586 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 716UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 587 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 717UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 588 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 718UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC K2500 Suburban continued Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 589 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 719UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC Safari continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Savana 1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 590 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 720UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Honda Passport Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Isuzu Hombre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 591 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 721UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 592 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 722UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) AWD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) AWD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft Rear and Center Joint 225 (4,5) AWD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) AWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 593 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 723UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Discovery Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 344 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft344 2 Lexus LX450 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 209 (5,6,7) Performance Grade; Grease Fitting in Center of Cross 285 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda B2300 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 594 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 724UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Mazda B2300 continued Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 B3000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 B4000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 595 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 725UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap 380 3 Mercury Cougar Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Montero Front Shaft All Joints 109 (1,2) 3.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Front Shaft All Joints 109 (1,2) 3.5L; Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 596 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 726UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 127 (2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 SVX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 Suzuki Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 597 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 727UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner continued Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 RAV4 Rear Shaft All Joints AWD 349 2 T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 598 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 728UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1996 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 1995 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 599 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 729UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro continued Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 600 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 730UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 601 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 731UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 602 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 732UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G20 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 603 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 733UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 604 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 734UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 605 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 735UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 606 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 736UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 607 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 737UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Transmission to Axle 270 1 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 608 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 738UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Front Shaft Front Joint 112 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 1 Front Shaft Front Joint 112 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Transmission to Axle 270 1 Silverado Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 609 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 739UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Tahoe Front Shaft All Joints 109 (1,2) 4WD; GAS Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD; GAS Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 4WD; DIESEL Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge B1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 610 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 740UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge B2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 611 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 741UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 612 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 742UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 613 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 743UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 614 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 744UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 615 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 745UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Dodge Viper continued Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Eagle Summit Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 616 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 746UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Front Shaft Front Joint 236 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 237 (1) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 236 (1) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 237 (1) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft 280 1 Front Shaft Rear and Center Joint 236 (2,3) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 Front Shaft Rear and Center Joint 237 (2,3) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Rear Shaft All Joints 237 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 2 Rear Shaft All Joints 237 (4,5) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 2 Rear Shaft All Joints 237 (4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 617 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 747UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 236 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 236 (6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 236 (6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 618 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 748UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 619 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 749UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 620 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 750UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 F59 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 Mustang Rear Shaft All Joints 101 (1,2) 3.8L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 5.8L; Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 5.8L; Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 621 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 751UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft Front Joint 233 (3) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 622 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 752UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 623 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 753UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 624 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 754UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC C3500HD continued Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 G1500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 625 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 755UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 109 (1) AWD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; High Performance Suspension 231 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; High Performance Suspension 331 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; High Performance Suspension 232 2 Rear Shaft All Joints 109 (3,4) AWD Incl. 4 Outside Lock Rings; Standard Suspension; Standard Grade; Grease Fitting in Cross; 1.125" Bearing Cap Diameter 534G 2 Rear Shaft All Joints 109 (3,4) AWD Standard Suspension; Grease Fitting in Cross; Performance Grade; 1.125" Bearing Cap Diameter; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) AWD Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft; High Performance Suspension 331C 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 626 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 756UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 627 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 757UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 628 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 758UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Sonoma Front Shaft Front Joint 109 (1) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 629 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 759UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD; GAS Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD; GAS Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 4WD; DIESEL Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Honda Passport Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Isuzu Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 2 630 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 760UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Isuzu Pickup continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 383 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 383 3 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJR Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 631 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 761UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Jaguar XJR continued Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 632 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 762UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 2 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Kia Sportage Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 386 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 386 3 Land Rover Defender 90 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft Front and Rear Joints 209 (5,7) Standard Grade; Grease Fitting in Cross 344 2 Discovery Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Range Rover Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 344 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft344 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft344 2 633 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 763UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Town Car Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mazda 929 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2300 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 B3000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 634 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 764UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Mazda B3000 continued Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 B4000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade 280 3 635 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 765UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap 380 3 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Montero Front Shaft All Joints 109 (1,2) 3.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Front Shaft All Joints 109 (1,2) 3.5L; Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 112 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 636 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 766UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 SVX Rear Shaft Front and Rear Joints 102 (1,3) AWD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 637 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 767UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Toyota Pickup continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 2 T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Tacoma Front Shaft All Joints 116 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 387 2 Front Shaft All Joints 117 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 387 2 Front Shaft All Joints 116 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 2 Piece Rear Driveshaft 285 2 Front Shaft All Joints 117 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross; 1 Piece Rear Driveshaft 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 638 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 768UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1995 Position Application Attributes Application Notes Part NumberQty Toyota Tacoma continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Standard Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 116 (3,6) 4WD Performance Grade; 4 Joint Driveshaft; Grease Fitting in Center of Cross 285 2 Rear Shaft Rear Joint 117 (5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 1 Rear Shaft Rear Joint 117 (5) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 1 Volvo 940 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 1994 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 639 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 769UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro continued Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft All Joints 109 (1,2) 4WD; GAS Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD; GAS Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 4WD; DIESEL Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 640 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 770UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 641 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 771UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft Front and Rear Joints 102 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Front and Rear Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 642 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 772UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G20 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 643 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 773UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 644 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 774UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 645 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 775UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Suburban continued Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 646 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 776UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Transmission to Axle 270 1 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 647 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 777UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Transmission to Axle 270 1 648 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 778UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B350 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 649 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 779UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 248 3 Ram 1500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 650 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 780UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Ram 2500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; U-Joint in Slip Yoke 248 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters; U-Joint in Slip Yoke 458 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 651 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 781UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Ram 3500 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 316 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 248 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 652 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 782UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; 1.063" Bearing Cap Diameter 260 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Steel Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft246 2 653 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 783UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Eagle Summit Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 654 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 784UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Eagle Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Exc. Police & Trailer Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Exc. Police & Trailer Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Police & Trailer Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 655 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 785UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Explorer Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Grease Fitting in Cross; Performance Grade 260 3 656 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 786UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford Explorer continued Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 657 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 787UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 658 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 788UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 659 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 789UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 F59 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 Mustang Rear Shaft All Joints 101 (1,2) 3.8L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 660 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 790UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 661 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 791UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 662 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 792UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC C2500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 G1500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 663 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 793UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G3500 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 Jimmy Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 664 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 794UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 665 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 795UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 666 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 796UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC K2500 Suburban continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Sonoma Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 667 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 797UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Front Shaft Front Joint 109 (1) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Yukon Front Shaft All Joints 109 (1,2) 4WD; GAS Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD; GAS Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 109 (1) 4WD; DIESEL Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 4WD; DIESEL Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 4WD; DIESEL Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Honda Passport Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 668 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 798UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Honda Passport continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 383 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 383 3 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 669 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 799UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 670 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 800UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Defender 90 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft Front and Rear Joints 209 (5,7) Standard Grade; Grease Fitting in Cross 344 2 Discovery Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 671 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 801UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda 929 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 B3000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 672 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 802UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Mazda B3000 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 B4000 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 Navajo Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 673 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 803UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Mazda Navajo continued Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 205 (7,8,9) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Center of Cross 450 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) 3.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Front Shaft All Joints 109 (1,2) 3.5L; Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross; From 12/02/1993 450 2 Rear Shaft All Joints 109 (3,4) Standard Grade; To 12/01/1993 412 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 674 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 804UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Nissan D21 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Laser Rear Shaft All Joints 101 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Pontiac Firebird Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft Front and Rear Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 SVX Rear Shaft Front and Rear Joints 102 (1,3) AWD Standard Grade; Stake Type 349 2 675 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 805UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 2 676 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 806UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1994 Position Application Attributes Application Notes Part NumberQty Toyota Previa continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 1 T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Volvo 940 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 960 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 1993 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 677 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 807UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 678 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 808UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 679 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 809UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 680 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 810UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G20 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G30 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 681 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 811UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 682 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 812UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 683 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 813UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 109 (1,2) 6.2L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 684 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 814UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 685 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 815UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Imperial N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 686 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 816UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Chrysler LeBaron continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 687 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 817UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge B250 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B350 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 688 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 818UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 3 D350 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 2 689 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 819UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 690 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 820UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge Daytona continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Ram 50 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 691 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 821UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 692 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 822UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge Viper continued Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 693 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 823UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Eagle 2000 GTX Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Summit Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 694 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 824UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford Aerostar continued Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Exc. Police & Trailer Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Exc. Police & Trailer Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Police & Trailer Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 695 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 825UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Explorer Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 696 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 826UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 697 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 827UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 698 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 828UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 699 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 829UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford F53 continued Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 3 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 3 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 3 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 700 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 830UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Thunderbird Rear Shaft All Joints 101 (1,2) 3.8L; LX Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; LX Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 5.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 701 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 831UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 702 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 832UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC C3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 G1500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 703 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 833UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 704 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 834UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 705 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 835UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 706 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 836UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Sonoma Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 707 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 837UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Typhoon Front Shaft All Joints 109 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 708 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 838UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Isuzu Pickup continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 383 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 383 3 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 709 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 839UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Grand Wagoneer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 710 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 840UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Jeep Grand Wagoneer continued Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Defender 110 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft Front and Rear Joints 209 (5,7) Standard Grade; Grease Fitting in Cross 344 2 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 711 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 841UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda 929 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 Navajo Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 712 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 842UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Mercury Grand Marquis continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Center of Cross 450 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 713 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 843UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Acclaim N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Laser Rear Shaft All Joints 101 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 714 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 844UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Plymouth Voyager continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Firebird Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 Loyale Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 SVX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 715 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 845UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Celica Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) AWD Performance Grade; Grease Fitting in Center of Cross 285 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 1 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 716 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 846UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1993 Position Application Attributes Application Notes Part NumberQty Toyota Supra continued Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 T100 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Volvo 240 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 940 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 960 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 1992 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 717 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 847UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Cadillac Commercial Chassis continued Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 718 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 848UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 719 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 849UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 720 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 850UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G20 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G30 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 721 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 851UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 722 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 852UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 4.3L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.0L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 5.7L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 723 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 853UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 109 (1,2) 6.2L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Front Shaft All Joints 109 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 109 (1,2) 7.4L; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 109 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 109 (1) 6.5L; Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Front Joint 109 (1) 6.5L; Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 109 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 109 (2) 6.5L; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft Rear Joint 109 (2) 6.5L; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 724 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 854UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 725 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 855UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Imperial N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 726 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 856UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Chrysler LeBaron continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Daihatsu Rocky Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 727 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 857UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge B250 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B350 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 728 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 858UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D250 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 729 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 859UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 1.063 & 1.075" Bearing Cap Diameters; Aluminum-Graphite Driveshaft 457C 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum-Graphite Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 458C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 730 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 860UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge Dynasty continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Ram 50 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 731 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 861UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Viper Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 232 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 732 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 862UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 733 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 863UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Dodge W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Eagle 2000 GTX Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Summit Rear Shaft All Joints 101 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 734 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 864UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Exc. Police & Trailer Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Exc. Police & Trailer Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Police & Trailer Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Police & Trailer Towing Package; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 735 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 865UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Explorer Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 736 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 866UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 737 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 867UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 738 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 868UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 F59 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 2 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 739 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 869UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 205 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Thunderbird Rear Shaft All Joints 101 (1,2) 3.8L; Base Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; Base Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 3.8L; LX Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; LX Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Grease Fitting in Cross; Performance Grade 260 2 740 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 870UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird continued Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 5.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 741 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 871UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 742 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 872UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC C3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 3.624" Outside Lock-Up; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 G1500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 743 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 873UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC G2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 G3500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 744 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 874UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K1500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 109 (3,4) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) 4.3L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 4.3L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.0L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 745 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 875UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft All Joints 112 (1,2) 6.2L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 6.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft All Joints 112 (1,2) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Shaft Front Joint 112 (1) 6.5L; Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Front Joint 112 (1) 6.5L; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) 6.5L; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) 6.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) 6.5L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) 6.5L; Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 K2500 Suburban Front Shaft All Joints 109 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 K3500 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 746 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 876UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC P3500 continued Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Sonoma Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Typhoon Front Shaft All Joints 109 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 747 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 877UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty GMC Typhoon continued Front Shaft Rear Joint 109 (2) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Yukon Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 383 2 Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 748 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 878UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 749 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 879UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 750 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 880UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda 929 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 Navajo Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) LS Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LS Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) XR-7 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) XR-7 Grease Fitting in Cross; Performance Grade 260 2 751 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 881UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Mercury Cougar continued Rear Shaft All Joints 101 (1,2) XR-7 Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Galant Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Center of Cross 450 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 752 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 882UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Nissan Pathfinder continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Acclaim N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Laser Rear Shaft All Joints 101 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 753 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 883UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Plymouth Sundance continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Subaru Legacy Front AWD 349 1 Rear AWD 349 1 Loyale Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 SVX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 754 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 884UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Suzuki Sidekick continued Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Celica Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) AWD Performance Grade; Grease Fitting in Center of Cross 285 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Inside Lock Rings; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 1 755 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 885UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1992 Position Application Attributes Application Notes Part NumberQty Toyota Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Volvo 240 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 940 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 960 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 1991 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Roadmaster Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 756 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 886UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 757 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 887UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 758 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 888UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 759 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 889UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl . 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl . 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 890UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 761 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 891UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft260 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 762 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 892UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 130 (6,7) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 120 (5,6) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 130 (6,7) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 763 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 893UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 764 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 894UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft Center Joint 102 (2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 765 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 895UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet R1500 Suburban continued Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 766 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 896UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 V1500 Suburban Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 225 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 767 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 897UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet V2500 Suburban continued Front Shaft All Joints 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 768 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 898UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet V3500 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 3 Joint Front Driveshaft 330 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up; 2 Joint Front Driveshaft 330 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 3 Joint Front Driveshaft 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up; 2 Joint Front Driveshaft 295A 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Chrysler Imperial N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 769 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 899UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Chrysler New Yorker continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Daihatsu Rocky Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 770 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 900UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge B350 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 771 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 901UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D250 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 3 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 772 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 902UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge D350 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter; Steel Driveshaft 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter; Steel Driveshaft 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter; Steel Driveshaft 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter; Steel Driveshaft 246 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter; Steel Driveshaft 316 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter; Steel Driveshaft 248 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; 1.063 & 1.075" Bearing Cap Diameters; Aluminum-Graphite Driveshaft 457C 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 773 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 903UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge Daytona continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Ram 50 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 774 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 904UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 775 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 905UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 776 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 906UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Eagle 2000 GTX Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 777 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 907UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3.220" Outside Lock-Up 380 3 Country Squire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 778 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 908UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Club Wagon continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Explorer Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; 2-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Automatic; 4-door Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 779 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 909UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 780 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 910UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 781 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 911UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 782 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 912UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 LTD Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 783 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 913UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 3 Tempo Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) AWD Performance Grade; Grease Fitting in Bearing Cap 240 3 Thunderbird Rear Shaft All Joints 101 (1,2) 3.8L; Base Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; Base Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 3.8L; LX Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3.8L; LX Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 3.8L; Super Coupe Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) 5.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 784 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 914UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 785 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 915UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC C3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 C3500HD Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 G1500 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 786 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 916UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC G2500 continued Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 787 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 917UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 K1500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 788 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 918UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 789 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 919UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 790 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 920UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft Center Joint 102 (2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft Front and Rear Joints 102 (1,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 791 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 921UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC R3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Sonoma Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 792 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 922UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Syclone Front Shaft All Joints 109 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 V1500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 793 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 923UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC V1500 Suburban continued Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 2 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 794 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 924UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty GMC V3500 continued Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 4.185" Outside Lock-Up 330 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 4.185" Outside Lock-Up 295A 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3.624" Outside Lock-Up; Coated for Aluminum Driveshaft 331C 1 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings383 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 383 2 795 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 925UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Isuzu Rodeo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Steel Yoke 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Steel Yoke 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Steel Yoke 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 926UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 797 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 927UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Lincoln Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 Navajo Front Shaft Front Joint 205 (4) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 205 (4) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 205 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 3 Front Wheels All Joints 205 (1,2,3) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 3 Front Wheels All Joints 205 (1,2,3) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter436 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 205 (7,8,9) Grease Fitting in Cross; Performance Grade 280 3 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 798 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 928UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Mercury Colony Park continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Cougar Rear Shaft All Joints 101 (1,2) LS Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LS Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) XR-7 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) XR-7 Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) XR-7 Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Topaz Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 3 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Galant Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Mighty Max Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Center of Cross 450 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 799 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 929UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Bravada Front Shaft Rear and Center Joint 127 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 127 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 127 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Acclaim N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 800 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 930UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Plymouth Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 801 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 931UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Subaru Legacy Rear Shaft Front and Center Joints 102 (1,2) AWD Standard Grade; Stake Type 349 2 Loyale Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Camry Rear Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Stake Type 349 3 Celica Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) AWD Performance Grade; Grease Fitting in Center of Cross 285 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 209 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Previa Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Stake Type 349 2 802 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 932UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1991 Position Application Attributes Application Notes Part NumberQty Toyota Previa continued Rear Shaft All Joints 109 (3,4) AWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 109 (3,4) AWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 1 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Volvo 240 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 780 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 3 940 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 1990 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 803 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 933UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Cadillac Brougham continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Front Shaft Front Joint 109 (1,2) AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 331 2 804 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 934UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 805 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 935UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 936UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 807 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 937UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft260 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 808 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 938UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 130 (6,7) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 120 (5,6) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 130 (6,7) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 809 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 939UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 810 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 940UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 811 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 941UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet R1500 Suburban continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 812 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 942UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 813 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 943UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet V1500 Suburban Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 225 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 814 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 944UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet V2500 Suburban continued Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Chrysler Imperial Front Shaft Standard Grade; Sealed Unit; w/ U-Joint Style Intermediate Shaft 315 1 Front Shaft Standard Grade; Grease Fitting in Cross; w/ U-Joint Style Intermediate Shaft 315G 1 Front Shaft Standard Grade; Grease Fitting in Bearing Cap; w/ U-Joint Style Intermediate Shaft 317 1 Front Shaft Grease Fitting in Cross; Performance Grade; w/ U-Joint Style Intermediate Shaft 245 1 Front Shaft Performance Grade; Grease Fitting in Bearing Cap; w/ U- Joint Style Intermediate Shaft 246 1 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 815 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 945UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Daihatsu Rocky Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Dodge 2000 GTX Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 816 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 946UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 817 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 947UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.078" Bearing Cap Diameter 245 2 818 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 948UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge D250 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; 1.127" Bearing Cap Diameter 248 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 819 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 949UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 820 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 950UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge Omni continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Ram 50 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 821 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 951UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge Shadow continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 822 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 952UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Eagle Talon Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 823 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 953UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford Aerostar Front Shaft All Joints 231 (3,4) AWD Standard Grade; Sealed Unit 437 2 Front Shaft All Joints 231 (3,4) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 231 (3,4) AWD Performance Grade; Grease Fitting in Bearing Cap 240 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Sealed Unit; w/ Inboard U-Joints on Front Axle 437 2 Front Wheels All Joints 231 (1,2) AWD Standard Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 437G 2 Front Wheels All Joints 231 (1,2) AWD Performance Grade; Grease Fitting in Bearing Cap; w/ Inboard U-Joints on Front Axle 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft Front and Rear Joints 231 (5,6) AWD Grease Fitting in Cross; Performance Grade 280 2 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 221 (6,7,8) Grease Fitting in Cross; Performance Grade 260 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 3 Bronco II Front Shaft All Joints 205 (4,5,6) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Country Squire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 824 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 954UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 825 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 955UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 826 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 956UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 827 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 957UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade 260 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 828 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 958UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft330 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 295A 4 LTD Crown Victoria Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft Front Joint 205 (4) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 233 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 205 (4) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 829 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 959UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft Front Joint 233 (3) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 205 (5,6) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 2 Joint Front Driveshaft 371 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3 Joint Front Driveshaft 371 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 436 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 233 (5,6,7) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 205 (7,8,9) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 205 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Tempo Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) AWD Performance Grade; Grease Fitting in Bearing Cap 240 3 Thunderbird Rear Shaft All Joints 101 (1,2) Base Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Base Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) LX Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LX Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Super Coupe Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Super Coupe Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Super Coupe Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 960UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 831 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 961UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC C2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 832 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 962UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 K1500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 833 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 963UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 225 (6,7,8) Sealed Unit; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 834 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 964UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 835 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 965UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 836 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 966UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC R1500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 837 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 967UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC S15 continued Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 838 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 968UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC Safari Front Shaft Front Joint AWD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 1 Rear Shaft Front Joint 109 (3) AWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 109 (3) AWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 109 (4) AWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 109 (4) AWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 V1500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 839 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 969UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC V1500 Suburban continued Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 2 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 840 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 970UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty GMC V3500 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 383 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft383 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 232 4 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 841 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 971UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 842 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 972UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 843 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 973UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Mazda MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Cougar Rear Shaft All Joints 101 (1,2) LS Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LS Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) XR-7 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) XR-7 Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) XR-7 Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Topaz Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 3 Mitsubishi Eclipse Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Galant Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 398 3 844 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 974UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Mitsubishi Mighty Max Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Center of Cross 450 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 450 2 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Rear Shaft All Joints 109 (3,4) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Acclaim N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 845 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 975UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Plymouth Acclaim continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 846 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 976UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Plymouth Voyager continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac 6000 Rear Shaft Rear Joint 119 (4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 119 (4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit 437 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft Two Center Joints 119 (2,3) Performance Grade; Grease Fitting in Bearing Cap 240 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Subaru Legacy Rear Shaft Front and Center Joints 102 (1,2) AWD Standard Grade; Stake Type 349 2 Loyale Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 977UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Toyota 4Runner Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Center of Cross 285 1 Camry Rear Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Stake Type 349 3 Celica Rear Shaft All Joints 102 (1,2,3) AWD Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) AWD Performance Grade; Grease Fitting in Center of Cross 285 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Volvo 240 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 848 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 978UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1990 Position Application Attributes Application Notes Part NumberQty Volvo 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 780 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 3 1989 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 849 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 979UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 850 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 980UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 851 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 981UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 852 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 982UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 853 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 983UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft260 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft260 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 130 (6,7) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 120 (5,6) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 854 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 984UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 112 (3,4,5) Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 120 (5,6) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 130 (6,7) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 855 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 985UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 856 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 986UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 857 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 987UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet R1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 858 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 988UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet R2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 859 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 989UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer continued Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 V1500 Suburban Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 225 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 860 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 990UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet V2500 Suburban continued Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 861 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 991UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet V3500 continued Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 Chrysler Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 862 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 992UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 863 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 993UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 864 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 994UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge D250 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 248 2 D350 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 330 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 330 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 315 2 865 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 995UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 866 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 996UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Lancer N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Raider Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Ram 50 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 867 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 997UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Spirit N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 868 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 998UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 869 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 999UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 Ford Aerostar Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 870 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1000UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft All Joints 221 (4,5) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 265 2 Front Shaft All Joints 221 (4,5) Automatic Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Automatic Grease Fitting in Cross; Performance Grade 265 2 Front Shaft Front Joint 221 (4) 5-Speed; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 221 (4) 5-Speed; Manual Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 221 (4) 5-Speed; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 221 (5) 5-Speed Standard Grade; Grease Fitting in Cross 355 1 Front Shaft Rear Joint 221 (5) 5-Speed Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 434 3 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual Grease Fitting in Cross; Performance Grade 265 3 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 221 (6) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 221 (6) Automatic Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 221 (6) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 221 (8) Automatic Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Automatic Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 205 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 205 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 233 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 Country Squire Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 871 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1001UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 872 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1002UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 873 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1003UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 874 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1004UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 LTD Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 437 2 875 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1005UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 437 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 207 (4,6) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 240 2 Front Shaft All Joints 217 (4,5) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 240 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 429 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 429 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 250 2 Front Shaft All Joints 217 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 250 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 436 1 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab Pickup3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab Pickup2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 876 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1006UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Tempo Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) AWD Performance Grade; Grease Fitting in Bearing Cap 240 3 Thunderbird Rear Shaft All Joints 101 (1,2) Base Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Base Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) LX Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LX Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Super Coupe Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Super Coupe Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Super Coupe Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 877 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1007UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 878 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1008UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 879 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1009UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 K1500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 880 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1010UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 225 (6,7,8) Sealed Unit; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 881 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1011UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 882 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1012UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 883 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1013UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC P3500 continued Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 884 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1014UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC R2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 885 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1015UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC S15 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 V1500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 886 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1016UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC V1500 Suburban continued Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 2 887 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1017UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty GMC V2500 Suburban continued Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 2 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Geo Tracker Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 398 2 Isuzu Amigo Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 383 2 Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft383 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft383 3 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1018UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Jaguar XJ12 continued Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 1 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 889 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1019UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Jeep Grand Wagoneer continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 890 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1020UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 MPV Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Stake Type 352 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Stake Type 352 2 Rear Shaft Front and Rear Joints 101 (1,2) RWD Standard Grade; Stake Type 352 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Cougar Rear Shaft All Joints 101 (1,2) LS Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) LS Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) XR-7 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) XR-7 Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) XR-7 Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 891 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1021UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Topaz Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 3 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 450 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) RWD; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 240SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 112 (1,2) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 112 (1,2) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 0.984" Bearing Cap Diameter 391 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 1.102" Bearing Cap Diameter 393 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1022UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Nissan D21 continued Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Pathfinder Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross 393 3 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Acclaim N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 893 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1023UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Plymouth Caravelle continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 894 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1024UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Plymouth Sundance continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac 6000 Rear Shaft Rear Joint 119 (4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 119 (4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit 437 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft Two Center Joints 119 (2,3) Performance Grade; Grease Fitting in Bearing Cap 240 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Subaru DL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 895 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1025UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Subaru GL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL-10 Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 RX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Sidekick Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Camry Rear Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Stake Type 349 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 896 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1026UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1989 Position Application Attributes Application Notes Part NumberQty Toyota Supra continued Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Van Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 349 3 Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 780 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 3 1988 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 897 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1027UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Blazer Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 331 2 898 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1028UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 899 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1029UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Transmission to Axle 270 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1030UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 K1500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 901 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1031UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 130 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 120 (5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 260 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft260 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft260 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 902 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1032UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 130 (6,7) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 120 (5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 120 (5,6) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 130 (6,7) Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 130 (6,7) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 120 (5,6) Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Transmission to Axle 270 1 K2500 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 903 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1033UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet K2500 continued Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Transmission to Axle 270 1 904 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1034UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 905 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1035UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 continued Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 906 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1036UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet R10 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R30 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 4 Joint Driveshaft 231 1 907 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1037UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet R30 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft331 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 908 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1038UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 V10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear Joint 225 (5) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 225 (5) Manual Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 225 (5) Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 225 (5) Manual Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Front Shaft Rear and Center Joint 225 (4,5) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Automatic Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 V20 Suburban Front Shaft All Joints 130 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft All Joints 120 (3,4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft All Joints 120 (3,4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft All Joints 112 (1,2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft All Joints 112 (1,2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 120 (3,4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 909 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1039UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet V20 Suburban continued Front Shaft All Joints 112 (1,2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft All Joints 120 (3,4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 V30 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 910 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1040UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet V30 continued Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Transmission to Axle 270 1 Chrysler Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 911 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1041UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge 600 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 912 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1042UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge B350 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 913 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1043UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 914 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1044UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge D350 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 915 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1045UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge Dynasty N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Lancer N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Mini Ram N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 916 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1046UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge Omni continued N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Raider Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.0L; RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) 2.6L; RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 917 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1047UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 918 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1048UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 330 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 295A 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Inside Lock Rings 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 919 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1049UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Ford Aerostar Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 434 3 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual Grease Fitting in Cross; Performance Grade 265 3 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 221 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 221 (6) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 221 (6) Automatic Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 221 (6) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 221 (8) Automatic Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Automatic Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 205 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 205 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 233 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 Country Squire Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 920 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1050UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 E-250 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 921 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1051UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 F Super Duty Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 922 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1052UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 923 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1053UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 924 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1054UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F53 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 F59 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 330 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 295A 3 LTD Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 437 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 437 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 217 (4,5) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 240 2 Front Shaft All Joints 207 (4,6) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 240 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 429 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 429 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 250 2 Front Shaft All Joints 217 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 250 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 436 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 925 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1055UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab Pickup2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab Pickup3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Tempo Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) AWD Performance Grade; Grease Fitting in Bearing Cap 240 3 Thunderbird Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 250 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1056UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird continued Rear Shaft All Joints 101 (1,2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 927 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1057UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC C2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 928 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1058UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC G3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 3 K1500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 929 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1059UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 112 (3,4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 112 (3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 3 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Joint Front Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 112 (3,4,5) Performance Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings290 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Rear Shaft All Joints 225 (6,7,8) Sealed Unit; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Rear Shaft All Joints 112 (3,4,5) Sealed Unit; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 K2500 Front Shaft All Joints 112 (1,2) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft All Joints 112 (1,2) Automatic Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Inside Lock Rings235 1 Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 930 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1060UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft Front Joint 130 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 112 (1) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 120 (3) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 355 1 Front Shaft Front Joint 112 (1) Manual Performance Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 120 (3) Manual Performance Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 290 1 Front Shaft Front Joint 112 (1) Manual Sealed Unit; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Front Joint 120 (3) Manual Sealed Unit; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 355C 1 Front Shaft Rear Joint 112 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 120 (4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft354 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 260 1 Front Shaft Rear Joint 112 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 120 (4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 112 (2) Manual Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Shaft Rear Joint 120 (4) Manual Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 354C 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft 232 1 931 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1061UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 K3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 112 (1,2) 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 355C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 932 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1062UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 2 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 933 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1063UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC R1500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft; 1.063" Bearing Cap Diameter 354C 1 R2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 934 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1064UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 368 1 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal 445 2 Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 455 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 109 (2) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Press-On Slip Yoke Seal 369 1 Front Shaft Rear Joint 112 (2) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Front Shaft Rear Joint 109 (2) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Press-On Slip Yoke Seal 280 1 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 935 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1065UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 1 V1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear Joint 225 (5) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 225 (5) Manual Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 225 (5) Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 225 (5) Manual Grease Fitting in Cross; Coated for Aluminum Driveshaft354C 1 Front Shaft Rear and Center Joint 225 (4,5) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Automatic Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 130 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 120 (3,4) Automatic Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Front Shaft All Joints 120 (3,4) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Front Shaft All Joints 120 (3,4) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Front Shaft All Joints 120 (3,4) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Front Shaft All Joints 120 (3,4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Front Shaft All Joints 120 (3,4) Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft355 1 936 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1066UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty GMC V2500 Suburban continued Front Shaft All Joints 120 (3,4) Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 290 1 Front Shaft All Joints 120 (3,4) Manual Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 354C 1 Front Shaft All Joints 120 (3,4) Manual 2 Joint Driveshaft; Sealed Unit; Coated for Aluminum Driveshaft 355C 1 Front Wheels All Joints 120 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 130 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 120 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 377 1 Front Wheels All Joints 130 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 377 1 Rear Shaft All Joints 130 (6,7) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 2 Rear Shaft All Joints 120 (5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 2 Rear Shaft All Joints 130 (6,7) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 2 Rear Shaft All Joints 120 (5,6) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 2 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Isuzu Pickup Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 383 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft383 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft383 3 937 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1067UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Isuzu Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 1 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1068UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Jeep Comanche continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 3 939 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1069UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 940 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1070UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Mazda B2600 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Topaz Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 3 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) 2.0L; RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) 2.6L; RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1071UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Mitsubishi Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 200SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 112 (1,2) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 112 (1,2) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 0.984" Bearing Cap Diameter 391 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 1.102" Bearing Cap Diameter 393 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Pathfinder Front Shaft All Joints 109 (1,2) Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 942 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1072UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Supreme continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 943 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1073UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Plymouth Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Steel Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Steel Driveshaft; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Aluminum Driveshaft 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Aluminum Driveshaft 280 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Driveshaft 369C 1 Rear Shaft Rear Joint 101 (2) Coated for Aluminum Driveshaft; Aluminum Driveshaft 372C 1 Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 944 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1074UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Pontiac Safari continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Subaru DL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL-10 Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 RX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Camry Rear Shaft All Joints 102 (1,2,3) 4WD Standard Grade; Stake Type 349 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft390 3 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft390 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 945 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1075UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Toyota Pickup continued Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Van Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 349 3 Van Wagon Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 349 3 Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 780 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 946 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1076UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1988 Position Application Attributes Application Notes Part NumberQty Volvo 780 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1987 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Brougham Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 947 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1077UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Blazer Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Outside Lock Rings 231 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 2 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 948 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1078UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 949 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1079UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 LLV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 950 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1080UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R10 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 R20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 951 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1081UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet R20 Suburban continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Sealed Unit; 4 Joint Driveshaft 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 129 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; 4 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 S10 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 V10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 952 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1082UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet V10 continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 V10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 V20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 V20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 953 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1083UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet V20 Suburban continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 V30 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 231 1 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 331 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 331 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 232 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 232 1 Rear Shaft All Joints 112 (3,4,5) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 2 Joint Front Driveshaft 331C 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft; 3 Joint Front Driveshaft 331C 1 Chrysler Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 954 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1084UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Chrysler LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge 600 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 955 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1085UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 956 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1086UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Charger N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 957 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1087UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 958 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1088UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge Dakota Front Shaft Front Joint 109 (1) 4WD Standard Grade; Grease Fitting in Cross 319 1 Front Shaft Rear and Center Joint 109 (2) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 109 (3,4) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Grand Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 959 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1089UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge Grand Caravan continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Lancer N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Mini Ram N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Raider Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.0L; RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 960 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1090UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge Ram 50 continued Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 101 (1,2) 2.6L; RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 Shadow N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 961 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1091UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge W100 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 962 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1092UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Ford Aerostar Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Bronco Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear Joint 221 (5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 205 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 205 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 963 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1093UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford Bronco II continued Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 Country Squire Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 E-250 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 964 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1094UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 F-150 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear Joint 207 (6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 965 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1095UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear Joint 207 (6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 966 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1096UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 967 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1097UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 LTD Crown Victoria Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) 2.3L; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 2.3L; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) 5.0L; Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 Ranger Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 437 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 437 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 437G 2 Front Shaft All Joints 217 (4,5) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 240 2 Front Shaft All Joints 207 (4,6) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 240 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 429 2 Front Shaft All Joints 217 (4,5) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 429 2 Front Shaft All Joints 217 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 1 Piece Rear Driveshaft 250 2 968 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1098UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings; 2 Piece Rear Driveshaft 250 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 436 3 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 436 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab Pickup3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab Pickup2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Tempo Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) AWD Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Sealed Unit 437 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1099UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Ford Tempo continued Rear Shaft All Joints 219 (1,2,3) AWD Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) AWD Performance Grade; Grease Fitting in Bearing Cap 240 3 Thunderbird Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Manual Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 GMC Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 970 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1100UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty GMC G3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 971 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1101UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 R1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 972 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1102UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty GMC R1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Coated for Aluminum Driveshaft 331C 1 R2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 R3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 973 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1103UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 V1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 V1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 974 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1104UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty GMC V1500 Suburban continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Outside Lock Rings; Coated for Aluminum Driveshaft 331C 1 V2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 V2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 V3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft All Joints 112 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Front Shaft All Joints 112 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft All Joints 112 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Coated for Aluminum Driveshaft 354C 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Coated for Aluminum Driveshaft331C 3 Hyundai Pony Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 437 2 975 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1105UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Hyundai Pony continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 240 2 Stellar Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 2 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft Center Joint 102 (2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 341 1 Rear Shaft Front and Center Joints 112 (3,4) 4WD Standard Grade; Grease Fitting in Cross 341 2 Rear Shaft Rear Joint 112 (5) 4WD Standard Grade; Grease Fitting in Cross 383 1 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; To 06/1987 341 3 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross; From 06/1987 383 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep Cherokee Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1106UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Jeep Comanche continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Wrangler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter371 2 Front Wheels All Joints 209 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap 377 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 977 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1107UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler continued Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Land Rover Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 344 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 B2600 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 352 3 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 978 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1108UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Mercury Colony Park Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Topaz Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit 437 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Bearing Cap 437G 4 Rear Half Shafts All Joints 219 (4,5,6,7) Performance Grade; Grease Fitting in Bearing Cap 240 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 219 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 3 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) 2.0L; RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 101 (1,2) 2.6L; RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 979 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1109UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Nissan 200SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 D21 Front Shaft All Joints 109 (1,2) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 109 (1,2) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 0.984" Bearing Cap Diameter 391 2 Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 109 (3,4) 4WD USA Production; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) 4WD USA Production; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 1.102" Bearing Cap Diameter 393 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Pathfinder Front Shaft All Joints 109 (1,2) Standard Grade; Sealed Unit 446 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Inside Lock Rings393 2 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 980 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1110UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Salon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Grand Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 981 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1111UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Plymouth Grand Voyager continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Sundance N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 982 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1112UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Plymouth Turismo continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 DL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL-10 Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 RX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 983 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1113UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Subaru XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Cressida Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft390 3 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft390 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 984 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1114UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1987 Position Application Attributes Application Notes Part NumberQty Toyota Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Van Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Stake Type 349 3 Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 780 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 985 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1115UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 5 Joint Driveshaft 534G 4 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; 5 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevrolet Astro Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 986 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1116UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 987 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1117UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Suburban continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 988 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1118UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 989 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1119UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 990 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1120UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 991 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1121UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 continued Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 992 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1122UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer continued Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Laser N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 993 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1123UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge 600 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 994 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1124UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge B350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Charger N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 995 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1125UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 D100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 996 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1126UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge D250 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Lancer N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 997 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1127UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge Lancer continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Mini Ram N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Power Ram 50 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Rear Shaft All Joints 102 (1,2,3) 2.0L; Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; Standard Grade; Sealed Unit 399 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 998 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1128UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 999 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1129UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Ford Aerostar Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Bronco Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade 265 1 1000 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1130UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Front Shaft Rear Joint 221 (5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 205 (4,5,6) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 205 (4,5,6) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 Front Wheels All Joints 205 (1,2,3) 4WD Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 1001 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1131UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 E-250 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 1002 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1132UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 F-150 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear Joint 207 (6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 1003 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1133UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 1004 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1134UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings374 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 1005 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1135UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Ranger Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 437 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Outside Lock Rings; Grease Fitting in Bearing Cap 437G 2 Front Shaft All Joints 233 (3,4) 4WD Performance Grade; Outside Lock Rings; Grease Fitting in Bearing Cap 240 2 Front Shaft All Joints 233 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 429 2 Front Shaft All Joints 233 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside & Outside Lock Rings 250 2 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit 436 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab PickupStandard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab PickupStandard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 101 (1,2) RWD; Extended Cab Pickup2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 102 (1,2,3) RWD; Extended Cab Pickup3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint not Using U-Bolts 369 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint not Using U-Bolts 280 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 369 1 Rear Shaft Front Joint 102 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 280 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupStandard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; U-Joint Using U-Bolts 430 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab PickupGrease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 1006 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1136UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft Rear Joint 102 (3) RWD; Standard Cab PickupGrease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; U-Joint Using U-Bolts 255 1 Thunderbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 1007 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1137UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty GMC C2500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 1008 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1138UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty GMC G2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 109 (1) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1009 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1139UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty GMC K1500 continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 1010 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1140UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty GMC K2500 Suburban continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 1011 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1141UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty GMC P3500 continued Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Hyundai Pony Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 240 2 Stellar Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 2 1012 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1142UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft Center Joint 102 (2) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross 341 1 Rear Shaft Front and Center Joints 112 (3,4) 4WD Standard Grade; Grease Fitting in Cross 341 2 Rear Shaft Rear Joint 112 (5) 4WD Standard Grade; Grease Fitting in Cross 383 1 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 341 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Comanche Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1143UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Jeep Comanche continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 1014 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1144UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap; Exc. Stake Type 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 352 3 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 1015 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1145UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Mitsubishi Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 200SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross; From 11/1982 393 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross; From 11/1982 393 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; From 11/1982 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 D21 Front Shaft All Joints 112 (1,2) 4WD USA Production; Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; Outside Lock Rings 369 2 Front Shaft All Joints 208 (3,5) 4WD USA Production; Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; Outside Lock Rings 369 2 Front Shaft All Joints 112 (1,2) 4WD USA Production; Grease Fitting in Cross; Performance Grade; 3 Joint Rear Driveshaft; Outside Lock Rings 280 2 Front Shaft All Joints 208 (3,5) 4WD USA Production; Grease Fitting in Cross; Performance Grade; 2 Joint Rear Driveshaft; Outside Lock Rings 280 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; 3 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings; 0.984" Bearing Cap Diameter 391 2 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; 2 Joint Rear Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings; 0.984" Bearing Cap Diameter 391 2 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Sealed Unit; 2 Joint Rear Driveshaft; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Sealed Unit; 3 Joint Rear Driveshaft; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 208 (7,8) 4WD USA Production; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 208 (7,8) 4WD USA Production; Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 112 (3,4,5) 4WD USA Production; Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings; 1.102" Bearing Cap Diameter 393 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings; 1.102" Bearing Cap Diameter 393 3 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit; Inside Lock Rings; 1.063" Bearing Cap Diameter 446 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 1016 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1146UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Nissan D21 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 393 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 393 3 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 1017 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1147UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Plymouth Caravelle continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 1018 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1148UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Plymouth Turismo continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo 2.2 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1019 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1149UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Pontiac T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 DL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL-10 Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 RX Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Stake Type 349 2 XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Center of Cross 285 2 Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 349 3 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 106 (3) 4WD Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft390 3 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft390 2 1020 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1150UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Toyota Pickup continued Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft Center Joint 106 (7) 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft Front and Rear Joints 106 (6,8) 4WD Performance Grade; Grease Fitting in Center of Cross 285 2 Supra Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Center of Cross; Exc. Stake Type 387 3 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Center of Cross; Exc. Stake Type 285 3 Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 1021 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1151UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1986 Position Application Attributes Application Notes Part NumberQty Volvo 760 continued Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1985 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Fleetwood Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 5 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; 5 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 1022 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1152UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 1023 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1153UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1154UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 1025 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1155UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 1026 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1156UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 1027 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1157UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 2 1028 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1158UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Laser N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 1029 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1159UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Chrysler LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Dodge 600 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 1030 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1160UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1031 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1161UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Charger N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1032 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1162UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 1033 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1163UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge D350 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Lancer N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Mini Ram N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 1034 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1164UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge Omni continued N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Power Ram 50 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 1035 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1165UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge W100 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1036 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1166UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Ford Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 205 (4,5,6) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 233 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 205 (4,5,6) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 233 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Wheels All Joints 233 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 436 3 Front Wheels All Joints 205 (1,2,3) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 436 3 Rear Shaft All Joints 233 (5,6,7) Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 205 (7,8,9) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 205 (7,8,9) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 1037 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1167UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-250 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 1038 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1168UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Club Wagon continued Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Club Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 1039 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1169UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 F-150 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Shaft Rear Joint 207 (6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 1040 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1170UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Joint Front Driveshaft 231 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 3 Joint Front Driveshaft 231 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 331 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 331 1 Front Wheels All Joints 225 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 232 1 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 232 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 3 Joint Front Driveshaft 374 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Joint Front Driveshaft 374 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 354 1 1041 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1171UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 260 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Ranger Front Shaft All Joints 233 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Cross 429 2 1042 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1172UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft All Joints 233 (3,4) 4WD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Sealed Unit 437 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 437G 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Performance Grade; Grease Fitting in Bearing Cap 240 1 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Thunderbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 1043 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1173UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC C2500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 1044 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1174UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 109 (1) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 1045 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1175UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 1046 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1176UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Sealed Unit 231 3 1047 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1177UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center Joint 102 (2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Rear Joints 102 (1,3) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Rear Joints 102 (1,3) Grease Fitting in Cross; Performance Grade 232 2 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 1048 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1178UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Safari Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 232 1 Hyundai Pony Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 240 2 Stellar Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 102 (1,2,3) Performance Grade; Grease Fitting in Bearing Cap 240 2 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 341 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1179UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Jaguar XJ6 continued Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 1050 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1180UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 378 2 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 225 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 1051 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1181UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Lincoln Continental continued Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 1052 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1182UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Mitsubishi Mighty Max continued Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 200SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 393 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1053 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1183UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Supreme continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Colt Rear Shaft All Joints 124 (2,3,4) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 3 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 1054 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1184UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Plymouth Reliant continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo 2.2 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1055 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1185UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 DL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 GL-10 Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 XT Rear Shaft Front and Rear Joints 102 (1,3) 4WD Standard Grade; Stake Type 349 2 Suzuki Samurai Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 398 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 398 2 Toyota 4Runner Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 130 (3) Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 130 (4,5) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 130 (6,7) Performance Grade; Grease Fitting in Center of Cross 285 2 Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 349 3 Cressida Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 1056 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1186UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Toyota Cressida continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft390 2 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft390 3 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 394 3 Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 344 3 740 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 1057 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1187UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1985 Position Application Attributes Application Notes Part NumberQty Volvo 740 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 745 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1984 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 1058 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1188UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Buick Electra continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 1059 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1189UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevrolet C10 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C20 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 1060 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1190UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; Steel Yoke 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Steel Yoke 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; Steel Yoke 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Sealed Unit; Coated for Aluminum Driveshaft; Aluminum Yoke 231C 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1191UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Steel Yoke 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade; Steel Yoke 280 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Coated for Aluminum Driveshaft; Aluminum Yoke 369C 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 1062 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1192UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 1063 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1193UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 1064 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1194UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Monte Carlo Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 1065 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1195UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 1066 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1196UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Chrysler Laser N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 LeBaron N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Town & Country N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 1067 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1197UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge 600 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Aries N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1068 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1198UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge B350 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Caravan N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Charger N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 D100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 1069 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1199UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge D100 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 1070 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1200UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge D350 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Daytona N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Mini Ram N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Omni N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 1071 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1201UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge Omni continued N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Power Ram 50 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 Rampage N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 1072 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1202UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge W100 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 1073 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1203UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Ford Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Bronco II Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 436 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Sealed Unit 437 3 Rear Shaft All Joints 221 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 221 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 240 3 1074 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1204UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 1075 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1205UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline continued Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-250 Econoline Club Wagon Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 1076 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1206UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Center Joint 102 (2) Manual Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 2 Rear Shaft Front and Rear Joints 102 (1,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 2 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft434 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 265 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 1077 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1207UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 1078 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1208UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 1079 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1209UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Ford Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Ranger Front Shaft All Joints 233 (3,4) 4WD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 233 (3,4) 4WD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Front Shaft All Joints 233 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 233 (3,4) 4WD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Sealed Unit 437 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 437G 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Performance Grade; Grease Fitting in Bearing Cap 240 1 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Thunderbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 1080 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1210UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 1081 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1211UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 109 (1) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1082 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1212UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 109 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 109 (1) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 109 (3,4) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 109 (3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1083 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1213UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1084 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1214UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 534G 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 1085 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1215UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Hyundai Pony Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 240 2 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Trooper Front Shaft All Joints 112 (1,2) Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) Standard Grade; Grease Fitting in Cross 341 3 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1216UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Grand Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Scrambler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 378 2 1087 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1217UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler continued Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 225 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VII Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 1088 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1218UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 352 2 Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 1089 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1219UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Mitsubishi Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 200SX Rear Shaft All Joints 101 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 393 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 393 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 Oldsmobile 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 1090 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1220UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Caravelle N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Conquest Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Horizon N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Reliant N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 1091 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1221UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Plymouth Reliant continued N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Turismo 2.2 N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Voyager N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Bonneville Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1092 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1222UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Pontiac Bonneville continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota 4Runner Front Shaft Front Joint 130 (3) Standard Grade; Grease Fitting in Center of Cross 387 1 Front Shaft Front Joint 130 (3) Performance Grade; Grease Fitting in Center of Cross 285 1 Front Shaft Rear and Center Joint 130 (4,5) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 130 (6,7) Standard Grade; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 130 (6,7) Performance Grade; Grease Fitting in Center of Cross 285 2 Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 349 3 Corolla Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 1093 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1223UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Toyota Corolla continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 109 (1) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft390 3 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft390 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; 5-Speed; Manual 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Starlet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 394 3 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 1094 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1224UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1984 Position Application Attributes Application Notes Part NumberQty Volvo 242 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 DL Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 1983 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 1095 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1225UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty American Motors Eagle continued Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Spirit Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 1096 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1226UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 1097 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1227UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1098 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1228UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 1099 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1229UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 1100 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1230UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 1101 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1231UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Malibu Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1102 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1232UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 445 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 445 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 1103 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1233UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 S10 Blazer Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Fifth Avenue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Imperial Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 New Yorker N/A Standard Grade; Sealed Unit; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315 1 N/A Standard Grade; Grease Fitting in Cross; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 315G 1 N/A Standard Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 317 1 N/A Grease Fitting in Cross; Performance Grade; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 245 1 N/A Performance Grade; Grease Fitting in Bearing Cap; Front Axle Shaft at Support Bearing; w/ U-Joint Style Intermediate Shaft 246 1 1104 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1234UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Challenger Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 399 3 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 1105 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1235UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1106 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1236UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Dodge Diplomat continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Mirada Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Ram 50 Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Ram 50 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1107 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1237UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1108 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1238UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 1109 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1239UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1110 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1240UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 2 Outside Lock Rings & 2 U-Bolts 434 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 1111 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1241UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 1112 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1242UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Ford F-350 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Ranger Front Shaft All Joints 233 (3,4) 4WD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 233 (3,4) 4WD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 1113 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1243UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft All Joints 233 (3,4) 4WD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 233 (3,4) 4WD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 233 (3) 4WD; 5-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Sealed Unit 437 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 437G 1 Front Shaft Rear Joint 233 (4) 4WD; 5-Speed; Manual Performance Grade; Grease Fitting in Bearing Cap 240 1 Front Wheels All Joints 233 (1,2) 4WD Standard Grade; Sealed Unit 436 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Sealed Unit 437 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 437 3 Rear Shaft All Joints 233 (5,6,7) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 2 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 437G 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 2 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 240 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Thunderbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 1114 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1244UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC C2500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 1115 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1245UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 1116 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1246UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Front Joint 109 (1) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 1117 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1247UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban continued Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 1118 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1248UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 534G 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S15 Front Shaft All Joints 112 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 112 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 112 (3,4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 112 (3,4,5) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 S15 Jimmy Front Shaft All Joints 109 (1,2) 4WD Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Front Shaft All Joints 109 (1,2) 4WD Incl. 2 Inside and 2 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 445 2 Rear Shaft All Joints 109 (3,4) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 109 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1119 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1249UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1250UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Scrambler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 378 2 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 280 1 1121 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1251UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler continued Rear Shaft Rear Joint 225 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft 354 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VI Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 B2200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 1122 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1252UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Mazda B2200 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Mitsubishi Mighty Max Front Shaft All Joints 109 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 102 (1,2,3) 2.0L; RWD Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) 2.3L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 102 (1,2,3) 2.6L; RWD Standard Grade; Sealed Unit 399 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Sealed Unit 399 2 Montero Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit 399 2 Starion Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1253UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Nissan 280ZX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 Oldsmobile 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1124 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1254UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 PB150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 1125 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1255UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Plymouth PB350 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Sapporo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 399 3 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Bonneville Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 1126 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1256UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 349 3 Corolla Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Starlet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 1127 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1257UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1983 Position Application Attributes Application Notes Part NumberQty Volvo 242 continued Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 760 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2.25" Drive Shaft Tube Diameter 344 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 369 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade; 1.75" Drive Shaft Tube Diameter 280 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1982 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Spirit Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1128 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1258UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 1129 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1259UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille continued Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Fleetwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 1130 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1260UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C20 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1131 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1261UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 260 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 1132 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1262UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1133 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1263UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 1134 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1264UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 LUV Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 1135 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1265UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet Malibu Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P30 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 427 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 1136 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1266UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S10 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Imperial Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 1137 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1267UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Dodge B350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Challenger Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 399 3 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 1138 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1268UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D250 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D50 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.517" Outside Lock-Up 398 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 3.024" Outside Lock-Up 399 2 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Mirada Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 1139 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1269UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Dodge Mirada continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1140 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1270UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Dodge W250 continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap 246 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 3 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft All Joints 221 (4,5) Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 221 (4,5) Grease Fitting in Cross; Performance Grade 265 2 Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross; U-Joint Using U- Bolts 434 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade; U-Joint Using U-Bolts 265 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 2 1141 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1271UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Courier Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 E-100 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1142 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1272UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1143 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1273UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 2 Outside Lock Rings & 2 U-Bolts 434 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 1144 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1274UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross 434 1 1145 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1275UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 1146 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1276UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Granada Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Thunderbird Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 1147 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1277UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 1148 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1278UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 1149 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1279UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty GMC G3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 1150 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1280UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty GMC K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 225 (6,7,8) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1151 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1281UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty GMC K3500 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 534G 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 S15 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 1152 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1282UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Jaguar Vanden Plas Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 1153 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1283UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Jeep J10 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Scrambler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 225 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 209 (7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft354 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft 260 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 3 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1154 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1284UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler continued Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Joint Front Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Mark VI Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Mazda 626 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 397 3 B2000 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 B2200 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 1155 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1285UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 280ZX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 Oldsmobile 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1156 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1286UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Oldsmobile Custom Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Arrow Pickup Rear Shaft All Joints 101 (1,2) 2.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 1157 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1287UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Plymouth Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 PB150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Sapporo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 399 3 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 1158 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1288UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; Stake Type 349 3 Corolla Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 1159 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1289UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Toyota Corolla continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Starlet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1160 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1290UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1982 Position Application Attributes Application Notes Part NumberQty Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1981 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 1161 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1291UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty American Motors Eagle continued Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 109 (3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 109 (3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Spirit Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 1162 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1292UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Marathon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 1163 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1293UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 1164 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1294UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C20 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Grease Fitting in Cross; Performance Grade 260 4 Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 230 (1,2) Automatic Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 230 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1295UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 1166 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1296UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1167 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1297UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 1168 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1298UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 380 3 LUV Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 P20 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1169 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1299UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Imperial Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1170 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1300UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Dodge B150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1171 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1301UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Dodge B350 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Challenger Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Bearing Cap 398 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 399 3 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D250 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1172 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1302UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Dodge D250 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D50 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.517" Outside Lock-Up 398 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 3.024" Outside Lock-Up 399 2 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Mirada Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1173 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1303UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Dodge Mirada continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 St. Regis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 1174 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1304UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W250 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W350 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 1175 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1305UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Dodge W350 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Brava Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 221 (4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; From Serial #GJ0001 354 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade; From Serial #GJ0001 260 1 Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross; From Serial #GJ0001; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross; To Serial # GJ0000 434 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade; To Serial # GJ0000 265 1 Front Shaft Rear Joint 221 (5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; To Serial # GJ0000 354 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade; To Serial # GJ0000 260 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; To Serial # GJ0000; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; From Serial #GJ0001 434 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade; From Serial #GJ0001 265 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 1176 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1306UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Courier Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 E-100 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1177 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1307UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 1178 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1308UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Injected Plastic Retainers; Inside Lock Rings 235 2 Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 2 Outside Lock Rings & 2 U-Bolts 434 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 1179 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1309UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 1180 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1310UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 207 (4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 1181 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1311UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Granada Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Thunderbird Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 1182 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1312UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 1183 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1313UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 1184 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1314UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty GMC G3500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1185 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1315UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 1186 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1316UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; Performance Grade 280 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Isuzu Pickup Front Shaft Front Joint 112 (1) 4WD Standard Grade; Grease Fitting in Cross 341 1 Front Shaft Rear Joint 112 (2) 4WD Standard Grade; Grease Fitting in Cross 383 1 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Jaguar XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1317UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 CJ7 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 1188 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1318UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Scrambler Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 378 2 Rear Shaft Front Joint 209 (5) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 1 Rear Shaft Front Joint 209 (5) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 1 1189 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1319UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler continued Rear Shaft Rear Joint 209 (7) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 369 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 280 1 Rear Shaft Rear Joint 209 (7) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 280 1 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Mark VI Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Town Car Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 280 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 626 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 397 3 B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 GLC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 385 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 1190 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1320UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Mercury Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 280ZX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 810 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1321UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Oldsmobile 98 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Arrow Pickup Rear Shaft All Joints 101 (1,2) 2.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Caravelle Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 1192 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1322UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Plymouth Caravelle continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 PB150 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB250 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 1193 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1323UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Plymouth PB350 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Sapporo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 399 3 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1194 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1324UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Acadian Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Catalina Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1195 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1325UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Pontiac LeMans continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 T1000 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 1196 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1326UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Toyota Pickup continued Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Starlet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Triumph TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR8 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 262 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 1197 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1327UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1981 Position Application Attributes Application Notes Part NumberQty Volvo 262 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1980 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 1198 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1328UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty American Motors Concord continued Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Eagle Front Shaft All Joints 109 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 109 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 109 (3,4) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 109 (3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 109 (3,4) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 109 (3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 109 (3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 109 (4) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Spirit Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 1199 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1329UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 1200 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1330UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood continued Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Marathon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1201 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1331UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C20 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 C20 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Grease Fitting in Cross; Performance Grade 260 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1332UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Half Shafts All Joints 230 (3,4,5,6) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Manual Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 230 (1,2) Automatic Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Automatic Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 1203 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1333UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Transmission to Axle 6.6L; 270 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 1204 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1334UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 1205 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1335UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap 380 3 LUV Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 1206 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1336UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 continued Rear Shaft Front Joint 101 (1) Automatic; THM400 Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; Performance Grade 280 1 P20 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 1207 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1337UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Dodge Aspen Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1208 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1338UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 CB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 1209 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1339UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge CB300 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Colt Rear Shaft All Joints 101 (1,2) RWD; Automatic; Wagon Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) RWD; Manual; Wagon Standard Grade; Sealed Unit 399 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Panel Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1210 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1340UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge D100 Panel continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D200 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1211 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1341UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge D200 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D50 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.517" Outside Lock-Up 398 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 3.024" Outside Lock-Up 399 2 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Mirada Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1212 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1342UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge Mirada continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 RD200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1213 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1343UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 St. Regis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 1214 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1344UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge W200 continued Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W300 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Sealed Unit 315 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft Front and Center Joints 225 (6,7) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft Front and Center Joints 225 (6,7) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 1215 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1345UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Dodge W300 continued Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Brava Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 221 (4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; From Serial #GJ0001 354 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade; From Serial #GJ0001 260 1 Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross; From Serial #GJ0001; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Front Joint 221 (4) Standard Grade; Grease Fitting in Cross; To Serial # GJ0000 434 1 Front Shaft Front Joint 221 (4) Grease Fitting in Cross; Performance Grade; To Serial # GJ0000 265 1 Front Shaft Rear Joint 221 (5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; To Serial # GJ0000 354 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade; To Serial # GJ0000 260 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; To Serial # GJ0000; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 221 (5) Standard Grade; Grease Fitting in Cross; From Serial #GJ0001 434 1 Front Shaft Rear Joint 221 (5) Grease Fitting in Cross; Performance Grade; From Serial #GJ0001 265 1 Front Wheels All Joints 221 (1,2,3) Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 221 (1,2,3) Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft Front and Center Joints 221 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 221 (6,7) Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft Front and Center Joints 221 (6,7) Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft Rear Joint 221 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 221 (8) Grease Fitting in Cross; Performance Grade 265 1 Courier Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 E-100 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 1216 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1346UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline continued Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-100 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 1217 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1347UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Injected Plastic Retainers; Inside Lock Rings 235 2 Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 1218 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1348UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft Center Joint 102 (2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 2 Outside Lock Rings & 2 U-Bolts 434 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 1219 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1349UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford F-250 Front Shaft All Joints 207 (4,6) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 2 Front Shaft All Joints 207 (4,6) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 2 Front Shaft All Joints 207 (4,6) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 2 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 207 (4) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Front Shaft Front Joint 207 (4) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Front Joint 207 (4) 4WD Standard Grade; Grease Fitting in Cross; Incl. Inside and Outside Lock Rings 433 1 Front Shaft Rear Joint 207 (6) 4WD Standard Grade; Grease Fitting in Cross 434 1 1220 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1350UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Front Shaft Rear Joint 207 (6) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 3 Front Wheels All Joints 207 (1,2,3) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 3 Front Wheels All Joints 207 (1,2,3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 3 Rear Shaft All Joints 207 (7,8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 207 (7,8,9) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 207 (7,8,9) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; Incl. Inside and Outside Lock Rings433 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Granada Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 1221 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1351UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Ford LTD continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Pinto Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Thunderbird Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 GMC C1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1222 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1352UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C2500 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 1223 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1353UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1224 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1354UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1225 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1355UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P1500 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; Performance Grade 280 1 1226 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1356UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty GMC P2500 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 102 (3) Automatic Grease Fitting in Cross; Performance Grade 280 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 International Scout II Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 250 3 Jaguar XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1357UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Jaguar XJS continued Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 CJ7 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 1228 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1358UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 1229 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1359UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Mark VI Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Versailles Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 280 1 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 626 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 397 3 B2000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 GLC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 385 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 1230 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1360UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Mercury Cougar continued Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 250 1 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ Towing Package; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Monarch Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 280ZX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 720 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 391 1 810 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 1231 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1361UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Oldsmobile 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Plymouth Arrow Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Arrow Pickup Rear Shaft All Joints 101 (1,2) 2.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 1232 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1362UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Plymouth Caravelle Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 1233 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1363UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Plymouth PB300 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Sapporo Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 1234 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1364UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Volare Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1235 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1365UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Pontiac Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Sunbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 3 Rover 3500 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1366UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Stake Type 349 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Stake Type 349 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Exc. Stake Type 394 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Cressida Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 1237 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1367UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR8 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 262 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1368UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1980 Position Application Attributes Application Notes Part NumberQty Volvo 265 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1979 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 1239 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1369UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty American Motors Pacer continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Spirit Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1240 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1370UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Buick Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Skylark Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Seville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Checker Marathon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1241 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1371UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 1242 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1372UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1373UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Transmission to Axle 6.6L; 270 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 1244 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1374UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 1245 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1375UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 1246 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1376UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 LUV Front Shaft All Joints 112 (1,2) 4WD Standard Grade; Grease Fitting in Cross 383 2 Rear Shaft All Joints 109 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 112 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1247 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1377UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 1248 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1378UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Dodge Aspen Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 1249 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1379UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge B300 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 CB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Colt Rear Shaft All Joints 101 (1,2) 1.4L; RWD; Sedan Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 1.6L; RWD; Sedan Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; RWD; Sedan Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 101 (1,2) RWD; Wagon Standard Grade; Sealed Unit 399 2 D100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 1250 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1380UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge D100 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Panel Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 1251 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1381UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 1252 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1382UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge D300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D50 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.517" Outside Lock-Up 398 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 3.024" Outside Lock-Up 399 2 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Magnum Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 RD200 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 1253 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1383UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 St. Regis Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 1254 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1384UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W300 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1255 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1385UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Dodge W300 continued Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Sealed Unit 315 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft Front and Center Joints 225 (6,7) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft Front and Center Joints 225 (6,7) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Brava Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 354 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross; 1.063 & 1.125" Bearing Cap Diameters 434 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade; 1.063 & 1.125" Bearing Cap Diameters 265 1 Front Shaft Rear and Center Joint 106 (4,5) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Front Shaft Rear and Center Joint 106 (4,5) Grease Fitting in Cross; Performance Grade 260 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft Front and Center Joints 106 (6,7) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft Front and Center Joints 106 (6,7) Grease Fitting in Cross; Performance Grade 260 2 1256 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1386UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 265 1 Courier Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 E-100 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 E-150 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 E-250 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1257 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1387UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Injected Plastic Retainers; Inside Lock Rings 235 2 Rear Shaft Center Joint 102 (2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Center Joint 102 (2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 2 Outside Lock Rings & 2 U-Bolts 434 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 1 F-150 Front Shaft All Joints 106 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 354 3 1258 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1388UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 260 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 260 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 2 Piece Rear Driveshaft 534G 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings; 1 Piece Rear Driveshaft 534G 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 2 Piece Rear Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; 1 Piece Rear Driveshaft; Inside Lock Rings 235 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 1259 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1389UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-250 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 2 Outside Lock Rings & 2 U-Bolts 434 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 2 Outside Lock Rings & 2 U-Bolts 265 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 225 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 F-350 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 1260 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1390UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 260 1 Front Shaft Rear Joint 225 (5) 4WD Standard Grade; Grease Fitting in Cross 434 1 Front Shaft Rear Joint 225 (5) 4WD Grease Fitting in Cross; Performance Grade 265 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 225 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 3 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Granada Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 LTD Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 LTD II Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/o "S" Stamped on Slip Yoke 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; w/o "S" Stamped on Slip Yoke 260 1 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ "S" Stamped on Slip Yoke 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; w/ "S" Stamped on Slip Yoke; Inside Lock Rings 235 1 1261 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1391UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Ford LTD II continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; w/ "S" Stamped on Slip Yoke 375 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; w/o "S" Stamped on Slip Yoke 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; w/o "S" Stamped on Slip Yoke 265 1 Mustang Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Pinto Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranchero Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Thunderbird Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 GMC C1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 1262 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1392UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft Front and Center Joints 102 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft Rear Joint 102 (3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft Rear Joint 102 (3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.063 & 1.125" Bearing Cap Diameters 290 1 C2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 1263 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1393UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC C2500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 1264 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1394UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC G2500 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1265 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1395UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K1500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K2500 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K2500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1266 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1396UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC K2500 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K3500 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 231 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 331 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 232 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P3500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1267 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1397UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty GMC P3500 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 International Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1398UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 CJ7 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 1269 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1399UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Mark V Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Versailles Rear Shaft Center and Rear Joint 218 (2,3) Standard Grade; Flush Type Grease Fitting in Cross 379 2 1270 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1400UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Lincoln Versailles continued Rear Shaft Front Joint 218 (1) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 218 (1) Grease Fitting in Cross; Performance Grade 280 1 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 626 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 397 3 B2000 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 GLC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 385 2 RX-7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Capri Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Cougar Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Grand Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 Marquis Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; w/ Towing Package 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ Towing Package 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/o Towing Package 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/o Towing Package 250 2 1271 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1401UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Mercury Monarch Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 280ZX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 510 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 810 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1402UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Salon continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Plymouth Arrow Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Arrow Pickup Rear Shaft All Joints 101 (1,2) 2.0L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Caravelle Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 1273 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1403UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Plymouth PB200 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Sapporo Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1274 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1404UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Volare Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 1275 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1405UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Pontiac Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Phoenix Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Sunbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 1276 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1406UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Toyota Celica continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Front Shaft All Joints 109 (1,2) 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Front Shaft All Joints 109 (1,2) 4WD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Front Shaft Front Joint 106 (3) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 387 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross; w/ Double Cardan CV at Transfer Case 285 1 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Cross & Bearing Cap 513 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Center of Cross 387 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Center of Cross 285 2 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 1277 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1407UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1979 Position Application Attributes Application Notes Part NumberQty Volvo 242 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 262 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1978 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 1278 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1408UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Concord Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Inside & Outside Lock Rings 319 1 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 1279 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1409UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty American Motors Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1280 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1410UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Buick Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Skylark Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Seville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Checker Marathon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1281 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1411UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C20 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1412UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1283 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1413UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Transmission to Axle 6.6L; 270 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 1284 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1414UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K5 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 1285 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1415UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 LUV Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 1286 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1416UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1287 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1417UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chrysler Cordoba continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1288 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1418UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge Aspen Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1289 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1419UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge B300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 CB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 399 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) 1.6L; Sedan Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Sedan Standard Grade; Sealed Unit 399 2 Rear Shaft All Joints 101 (1,2) Wagon Standard Grade; Sealed Unit 399 2 1290 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1420UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge D100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D150 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 1291 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1421UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge D150 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 1292 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1422UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge D300 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Magnum Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 RD200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 1293 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1423UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge RD200 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1294 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1424UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1295 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1425UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Dodge W200 continued Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W300 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Sealed Unit 315 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft Front and Center Joints 225 (6,7) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft Front and Center Joints 225 (6,7) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 131 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Brava Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1296 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1426UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Front Shaft Front Joint 106 (3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Bearing Cap; 3.220" Outside Lock-Up 380 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Rear Joint 106 (8) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Bearing Cap; 3.220" Outside Lock-Up 380 1 Courier Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 E-100 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) 7.5L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) 7.5L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 1297 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1427UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline continued Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 1298 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1428UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon continued Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-250 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1299 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1429UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft353 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft353 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 275 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 275 1 F-150 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 3 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Front Shaft All Joints 106 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 106 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 1300 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1430UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-250 Front Shaft All Joints 212 (3,5,6) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 353 3 Front Shaft All Joints 212 (3,5,6) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 275 3 Front Shaft Front Joint 212 (3) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 212 (5,6) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 3 Joint Front Driveshaft 231 1 1301 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1431UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 212 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Joint Front Driveshaft 231 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 3 Joint Front Driveshaft 331 1 Front Wheels All Joints 212 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Joint Front Driveshaft 331 1 Front Wheels All Joints 225 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 3 Joint Front Driveshaft 232 1 Front Wheels All Joints 212 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Joint Front Driveshaft 232 1 Front Wheels All Joints 212 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Joint Front Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 3 Joint Front Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 3 Joint Front Driveshaft 377 1 Front Wheels All Joints 212 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Joint Front Driveshaft 377 1 Intermediate Shaft Front and Rear Joints 212 (4,7) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case; 3.220" Outside Lock-Up 369 2 Intermediate Shaft Front and Rear Joints 212 (4,7) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 212 (8,9) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 212 (8,9) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 212 (8,9) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 212 (8,9) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 212 (8,9) 4WD Standard Grade; Grease Fitting in Cross; 3.211 & 3.618" Outside Lock-Up 353 2 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 212 (8,9) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 1302 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1432UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 2 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 260 3 Fairmont Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Granada Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD II Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 1303 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1433UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Ford LTD II continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Mustang II Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranchero Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Thunderbird Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 GMC C15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C25 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1304 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1434UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty GMC C35 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Caballero Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Outside Lock Rings; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter; Outside Lock Rings 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter; Outside Lock Rings 232 1 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 1305 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1435UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty GMC G25 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 G35 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 1306 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1436UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty GMC K15 continued Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 1307 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1437UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty GMC K35 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 P15 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1308 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1438UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty GMC P35 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 International Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 1309 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1439UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 CJ7 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 1310 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1440UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Mark V Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Versailles Rear Shaft All Joints 218 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade 260 3 1311 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1441UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda B1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Cosmo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 GLC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 385 2 RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Grand Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1312 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1442UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Mercury Marquis continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monarch Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Zephyr Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 250 2 Nissan 200SX Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 280Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 510 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 810 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Stake Type 349 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 1313 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1443UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Oldsmobile 98 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Calais Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Plymouth Arrow Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Caravelle Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1314 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1444UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Plymouth Caravelle continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 218 (1,2,3) Wagon Standard Grade; Sealed Unit 399 3 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 1315 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1445UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Plymouth PB300 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Sapporo Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; Grease Fitting in Bearing Cap 398 2 Rear Shaft All Joints 101 (1,2) 2.6L; Standard Grade; Sealed Unit 399 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1316 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1446UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Volare Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1317 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1447UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Pontiac Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Phoenix Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Sunbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 3 Rolls-Royce Camargue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 1318 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1448UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Rolls-Royce Silver Wraith II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Subaru Brat Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Cressida Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1319 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1449UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1978 Position Application Attributes Application Notes Part NumberQty Volvo 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 262 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1977 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 1320 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1450UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1321 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1451UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Buick Century continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Skylark Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 1322 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1452UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Seville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Checker Marathon Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1323 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1453UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1454UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Transmission to Axle 6.6L; 270 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1325 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1455UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Transmission to Axle 6.6L; 270 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 1326 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1456UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 K5 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 LUV Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1327 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1457UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet Monte Carlo continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P20 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P30 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1328 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1458UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 LeBaron Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1329 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1459UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Chrysler New Yorker continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge Aspen Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1330 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1460UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 CB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 1331 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1461UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge CB300 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 D100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Panel Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1332 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1462UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge D100 Panel continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D150 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D200 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 1333 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1463UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge D200 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Diplomat Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1334 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1464UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge Diplomat continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ramcharger Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1335 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1465UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Royal Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W150 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 1336 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1466UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge W150 continued Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W300 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 1337 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1467UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Dodge W300 continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Sealed Unit 315 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft Front and Center Joints 225 (6,7) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft Front and Center Joints 225 (6,7) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft Front and Center Joints 225 (6,7) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 131 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 1338 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1468UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford Courier Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 1339 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1469UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline Club Wagon continued Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 1340 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1470UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon continued Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-250 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 1341 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1471UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 F-100 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-150 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 3 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Front Shaft All Joints 106 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 106 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 1342 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1472UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 275 2 Front Shaft Front Joint 232 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 232 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 232 (5,7) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 1 1343 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1473UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 1 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 232 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 377 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case; 3.220" Outside Lock-Up 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 208 (7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 232 (9,10,11) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 2 Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 1344 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1474UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 260 3 Granada Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 1345 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1475UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford LTD continued Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD II Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang II Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranchero Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 1346 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1476UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 GMC C15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1347 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1477UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty GMC G15 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 G35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1348 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1478UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 1349 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1479UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty GMC K25 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 1 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 232 3 P15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P25 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1350 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1480UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty GMC P25 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 International Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1481UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Jaguar XJ6 continued Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 CJ7 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1482UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 1353 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1483UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Jeep Wagoneer continued Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark V Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Versailles Rear Shaft All Joints 218 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade 260 3 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Cosmo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 GLC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 385 2 Mizer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Rotary Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 1354 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1484UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Grand Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monarch Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 1355 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1485UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Mercury Monarch continued Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Nissan 280Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 710 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 810 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1356 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1486UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Supreme continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Plymouth Arrow Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 1357 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1487UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Plymouth PB100 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 1358 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1488UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Volare Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Astre Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1359 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1489UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Pontiac Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Phoenix Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1360 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1490UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Pontiac Sunbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 3 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Camargue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Wraith II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Toyota Celica Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Corolla Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1491UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1977 Position Application Attributes Application Notes Part NumberQty Triumph TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1976 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 1362 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1492UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 1363 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1493UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Avanti II continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Skylark Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 1364 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1494UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Seville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Checker Marathon Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1365 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1495UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Transmission to Axle 6.6L; 270 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Chevette Rear Shaft All Joints 101 (1,2) Incl. 4 Outside and 2 Inside Lock Rings; Standard Grade; Grease Fitting in Cross 368 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1496UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Transmission to Axle 6.6L; 270 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1367 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1497UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Transmission to Axle 6.6L; 270 1 Impala Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 1368 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1498UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 LUV Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Laguna Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1369 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1499UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P20 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P30 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1370 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1500UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1371 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1501UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Chrysler Newport continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge Aspen Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1372 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1502UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge B200 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 CB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1373 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1503UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge Charger continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D100 Panel Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1374 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1504UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge D100 Panel continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 1375 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1505UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge D300 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ramcharger Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 1376 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1506UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Royal Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 1377 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1507UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge W100 continued Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft All Joints 225 (3,4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1378 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1508UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Dodge W200 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W300 Front Shaft All Joints 225 (3,4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Center Joint 225 (7) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft Center Joint 225 (7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft Center Joint 225 (7) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft Center Joint 225 (7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft Center Joint 225 (7) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft Front Joint 225 (6) Standard Grade; Sealed Unit 315 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Front Joint 225 (6) Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 1 1379 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1509UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 131 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Courier Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 1380 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1510UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline continued Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 1381 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1511UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 1382 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1512UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Elite Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 1383 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1513UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-150 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 106 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 3 Front Shaft All Joints 225 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Front Shaft All Joints 106 (3,4,5) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Front Shaft All Joints 106 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 106 (3) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 1 Front Shaft Front Joint 225 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 106 (3) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Front Shaft Front Joint 106 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 2 Piece Rear Driveshaft 379 2 Front Shaft Rear and Center Joint 106 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross; 1 Piece Rear Driveshaft 379 2 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Sealed Unit; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 106 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1 Piece Rear Driveshaft 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 106 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 1 1384 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1514UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 1 Rear Shaft All Joints 106 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 106 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 275 2 Front Shaft Front Joint 232 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 232 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 232 (5,7) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 1 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 232 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 377 1 1385 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1515UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 377 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case; 3.220" Outside Lock-Up 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 2 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 2 Rear Shaft All Joints 232 (9,10,11) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 208 (7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 2 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 2 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 2 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 1386 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1516UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1.063" Bearing Cap Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1.063" Bearing Cap Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 260 3 Gran Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Granada Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 1387 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1517UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford Granada continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang II Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 P-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 1388 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1518UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Ford Pinto continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranchero Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1389 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1519UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty GMC C15 Suburban continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1390 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1520UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty GMC G25 continued Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063 & 1.125" Bearing Cap Diameters 355 1 G35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 1391 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1521UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty GMC K15 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 1392 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1522UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty GMC P15 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1393 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1523UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty International Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJS Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1524UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 CJ7 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 1395 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1525UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Jeep J10 continued Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark IV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1600 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Cosmo Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Mizer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 1396 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1526UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Mazda RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Rotary Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 6.6L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.6L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.6L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.6L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Grand Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1397 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1527UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Mercury Marquis continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monarch Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Nissan 280Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 610 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 710 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1528UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Oldsmobile 98 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Tiara Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Plymouth Arrow Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1399 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1529UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Plymouth Duster continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 1400 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1530UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Plymouth PB200 continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 1401 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1531UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Volare Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1402 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1532UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Plymouth Volare continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Astre Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1403 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1533UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Pontiac LeMans continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Sunbird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Camargue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 1404 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1534UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Toyota Mark II Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Volvo 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 262 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1535UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1976 Position Application Attributes Application Notes Part NumberQty Volvo 264 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 265 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1975 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 2.439" Outside Lock-Up 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 240 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 2.439" Outside Lock-Up 437 2 1406 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1536UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty American Motors Hornet continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 240 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 2.439" Outside Lock-Up 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 240 2 Pacer Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 2.439" Outside Lock-Up 437 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 437G 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 2.439" Outside Lock-Up 240 2 Austin Marina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Apollo Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 1407 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1537UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Buick Electra continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Skyhawk Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Skylark Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 DeVille Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 1408 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1538UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille continued Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Checker Marathon Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 C10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1409 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1539UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1540UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Transmission to Axle 6.6L; 270 1 Impala Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1541UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 K10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1412 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1542UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap 380 2 LUV Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Laguna Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monza Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1413 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1543UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P20 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P30 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft 0.969" Bearing Cap Diameter 861 1 Steering Shaft 0.938" Bearing Cap Diameter 338 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Transmission to Axle 5.7L; 270 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1414 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1544UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chrysler Cordoba Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Imperial Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1415 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1545UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Chrysler Town & Country continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge B100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 B200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 CB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 1416 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1546UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge CB300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1417 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1547UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge D100 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1418 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1548UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge D300 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ramcharger Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 1419 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1549UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge Ramcharger continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Royal Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1420 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1550UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge W100 continued Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W200 Front Shaft All Joints 225 (3,4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 1421 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1551UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Dodge W300 Front Shaft All Joints 225 (3,4,5) Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter; 3500 lb. Front Axle 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; 1.188" Bearing Cap Diameter; Grease Fitting in Bearing Cap; 3500 lb. Front Axle 377 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Cross; 1.375" Bearing Cap Diameter; 4500 lb. Front Axle 374 1 Rear Shaft Center Joint 225 (7) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft Center Joint 225 (7) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft Center Joint 225 (7) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft Center Joint 225 (7) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft Center Joint 225 (7) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft Front Joint 225 (6) Standard Grade; Sealed Unit 315 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Front Joint 225 (6) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Front Joint 225 (6) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Front Joint 225 (6) Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft Rear Joint 225 (8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft Rear Joint 225 (8) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 Rear Shaft Rear Joint 225 (8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 1 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 131 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1422 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1552UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Courier Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) 5.0L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) 5.0L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 1423 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1553UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline continued Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-100 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) 5.0L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) 5.0L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 1424 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1554UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon continued Rear Shaft All Joints 101 (1,2) 138.0in / 350.5mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 1 Rear Shaft Front Joint 101 (1) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 1 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 2 Rear Shaft Front and Center Joints 102 (1,2) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 2 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft430 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 255 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 1425 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1555UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. Inside and Outside Lock Rings 433 1 Elite Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 1426 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1556UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-150 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 275 2 Front Shaft Front Joint 232 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 232 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 232 (5,7) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 1 Front Wheels All Joints 232 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 1 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 371 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 371 1 Front Wheels All Joints 232 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 377 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 377 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case; 3.220" Outside Lock-Up 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 2 1427 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1557UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 208 (7,8) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 354 2 Rear Shaft All Joints 232 (9,10,11) 4WD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 354 3 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 260 3 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 260 2 Rear Shaft All Joints 232 (9,10,11) 4WD Standard Grade; Grease Fitting in Cross; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade; 1 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 2 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 232 (9,10,11) 4WD Grease Fitting in Cross; Performance Grade; 2 Piece Rear Driveshaft; 3.211 & 3.618" Outside Lock-Up 275 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 1 1428 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1558UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford F-350 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1.063" Bearing Cap Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1.063" Bearing Cap Diameter 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 354 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up; 1.063" Bearing Cap Diameter 260 3 Gran Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Granada Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1429 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1559UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford LTD continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang II Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 P-350 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 102 (1,2,3) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 354 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 260 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1430 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1560UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Ford Ranchero continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 1431 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1561UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty GMC C15 Suburban continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 1.188" Bearing Cap Diameter; Coated for Aluminum Driveshaft 331C 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G35 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1432 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1562UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty GMC G35 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 380 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 1433 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1563UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty GMC K25 continued Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P25 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1434 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1564UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty GMC P25 continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P35 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 International 200 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 1 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 1 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Travelall Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 1435 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1565UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty International Travelall continued Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 CJ6 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1566UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Jeep CJ6 continued Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 1437 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1567UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Jeep J20 continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark IV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1600 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Rotary Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Mercury Bobcat Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 1438 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1568UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Mercury Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 6.6L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.6L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.6L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.6L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Grand Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monarch Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1439 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1569UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Mercury Monarch continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Nissan 260Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 280Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 610 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 710 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Oldsmobile 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1440 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1570UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1441 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1571UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Plymouth Fury continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 PB100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 PB200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 1442 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1572UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Plymouth PB300 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1443 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1573UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 218 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 218 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 218 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Astre Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 1444 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1574UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Pontiac Bonneville continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Grandville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1445 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1575UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Rolls-Royce Camargue Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Toyota Celica Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Corolla Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Mark II Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR7 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1576UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1975 Position Application Attributes Application Notes Part NumberQty Volvo 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 242 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 244 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 245 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 2" Drive Shaft Tube Diameter 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 2" Drive Shaft Tube Diameter 280 3 Rear Shaft Front and Center Joints 102 (1,2) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 341 2 Rear Shaft Rear Joint 102 (3) Standard Grade; Grease Fitting in Cross; 1.75" Drive Shaft Tube Diameter 344 1 1974 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1447 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1577UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Austin Marina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Apollo Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 1448 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1578UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Cadillac Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Taxicab Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 280 1 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 1449 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1579UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 280 2 C10 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C20 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1450 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1580UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1581UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G30 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1452 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1582UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1453 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1583UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Laguna Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Luv Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 1454 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1584UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet Nova continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P20 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1455 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1585UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge B100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1456 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1586UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge B100 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 B300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 CB300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1457 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1587UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge Challenger continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D200 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 1458 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1588UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 D300 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1459 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1589UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Sealed Unit; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 4 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 317 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 245 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 119 (1,2,3,4) Performance Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 246 4 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 248 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1460 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1590UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge M300 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Van Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1461 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1591UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Ramcharger Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 1462 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1592UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Dodge W100 Pickup continued Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 304 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 1463 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1593UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Ford Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Courier Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1464 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1594UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Ford E-100 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-200 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 1465 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1595UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 Gran Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1466 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1596UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Ford LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang II Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 1467 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1597UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1468 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1598UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1469 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1599UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15/G1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G35/G3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 280 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 1470 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1600UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Pickup continued Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 1471 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1601UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1472 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1602UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1473 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1603UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty International 100 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 200 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 1 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1604UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Cherokee Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Sealed Unit 315 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 225 (8) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 225 (8) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 225 (8) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 J10 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 J20 Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 369 3 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 280 3 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 209 (5,6,7) 4WD; Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) 4WD; Automatic Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) 4WD; Manual Standard Grade; Sealed Unit 315 3 1475 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1605UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Jeep Wagoneer continued Rear Shaft All Joints 209 (5,6,7) 4WD; Manual Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 209 (5,6,7) 4WD; Manual Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 209 (5,6,7) 4WD; Manual Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD; Manual Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Bearing Cap 317 2 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark IV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Mazda 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1600 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 RX-2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 1476 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1606UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Mazda RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 386 3 Rotary Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1477 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1607UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Mercury Montego continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 260Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 610 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 710 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1608UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1479 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1609UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Plymouth Fury I continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1480 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1610UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Plymouth PB100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 1 PB300 Van Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 1 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1481 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1611UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Plymouth Road Runner continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Trailduster Front Shaft Front Joint 225 (3) 4WD Standard Grade; Sealed Unit 315 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 315G 1 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 245 1 Front Shaft Front Joint 225 (3) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Outside Lock Rings; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 3 1482 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1612UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Plymouth Trailduster continued Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Catalina Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 1 1483 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1613UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Pontiac Grandville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 3500S Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1614UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Rover 3500S continued Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Toyota Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 389 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 389 3 Mark II Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1615UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1974 Position Application Attributes Application Notes Part NumberQty Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1973 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Austin Marina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Apollo Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Centurion Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Century Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1486 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1616UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Regal Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 1487 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1617UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood continued Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 270 2 Taxicab Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 270 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 C10 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 1488 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1618UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C10 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C20 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1489 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1619UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet C30 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Chevelle Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1620UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1491 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1621UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 1492 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1622UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Laguna Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Luv Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Malibu Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 1493 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1623UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 260 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1494 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1624UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Chrysler New Yorker continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge B100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 1495 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1625UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge B300 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 CB300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1496 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1626UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge Coronet continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D200 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 1497 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1627UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Sealed Unit; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1498 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1628UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge M300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 317 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 245 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 119 (1,2,3,4) Performance Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 246 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 248 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1499 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1629UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge P200 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Van Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1500 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1630UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Dodge W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 304 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 1501 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1631UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Courier Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 1502 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1632UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Ford Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 E-200 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 1503 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1633UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.211 & 3.618" Outside Lock-Up 353 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.211 & 3.618" Outside Lock-Up 275 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 1504 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1634UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Ford Gran Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1505 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1635UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Ford P-100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 1506 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1636UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1507 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1637UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1508 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1638UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty GMC C35/C3500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15/G1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G35/G3500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 1509 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1639UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Suburban continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1510 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1640UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 1511 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1641UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 International 1010 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 1512 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1642UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty International 1110 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1210 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1310 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 1 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XJ12 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 1513 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1643UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Jaguar XJ12 continued Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-2500 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1644UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Jeep J-2600 continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 1515 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1645UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark IV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mazda 618 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1600 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 RX-2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 1516 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1646UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1517 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1647UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Morris Minor Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 1200 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 240Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 610 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 620 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 B110 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1648UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Omega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Cricket Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1519 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1649UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Plymouth Fury I continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1520 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1650UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Plymouth Road Runner continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1521 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1651UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Am Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 1 Grandville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 1522 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1652UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Pontiac Parisienne continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 3500S Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1653UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Rover 3500S continued Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Toyota Carina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Mark II Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1654UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1973 Position Application Attributes Application Notes Part NumberQty Toyota Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Stag Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1972 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1655UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Avanti II continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Centurion Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 1526 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1656UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Cadillac Commercial Chassis continued Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 270 2 Taxicab Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 270 2 Chevrolet Bel Air Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Biscayne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 1527 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1657UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Brookwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C10 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1528 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1658UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1659UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G30 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1530 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1660UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 1531 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1661UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 Pickup continued Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Kingswood Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Luv Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft341 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft341 2 Monte Carlo Rear Shaft All Joints 101 (1,2) 5.7L; Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 6.6L; Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 1532 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1662UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Townsman Rear Shaft All Joints Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Inside Lock Rings235 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 260 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 1533 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1663UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Chrysler New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge B100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 1534 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1664UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge B200 Van continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B300 Van Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1535 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1665UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge Coronet continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D200 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1536 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1666UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge D300 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Sealed Unit; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315 4 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1537 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1667UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge M300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 317 4 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 245 4 Rear Shaft All Joints 119 (1,2,3,4) Performance Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 246 4 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 4 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 248 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 119 (1,2,3,4) Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 4 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1538 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1668UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge P200 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 1539 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1669UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 1540 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1670UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Dodge W100 Pickup continued Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft304 3 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft304 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 1541 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1671UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford Country Sedan continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Courier Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 1542 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1672UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford Custom 500 continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-200 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 377 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 1543 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1673UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 1544 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1674UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 Gran Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1545 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1675UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 P-100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 1546 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1676UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 129 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 354 4 Rear Shaft All Joints 129 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 260 4 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 265 1 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1547 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1677UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Ford Torino continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C15/C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1548 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1678UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15/G1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G35/G3500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Front Shaft Rear and Center Joint 225 (4,5) 4WD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 1549 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1679UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 371 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 371 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 377 2 1550 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1680UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1551 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1681UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P25/P2500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Automatic; AT218 Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic; AT218 Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) Automatic; THM350 Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Automatic; THM350 Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Automatic; THM350 Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) Automatic; THM350 Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross 355 1 1552 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1682UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty GMC Sprint continued Rear Shaft Rear Joint 101 (2) Automatic; THM400 Performance Grade; Grease Fitting in Bearing Cap 290 1 International 1010 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 1110 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1210 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1310 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 1 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 M1100 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 1553 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1683UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty International M1200 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 3 Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XJ6 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 1554 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1684UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Jeep Commando Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-2500 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 1555 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1685UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Jeep Wagoneer continued Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark IV Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 1556 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1686UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mazda 1200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft397 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft397 2 616 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 618 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 808 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 B1600 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 384 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 384 2 R100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1557 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1687UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Mercury Marquis continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 1200 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 240Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 521 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 620 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 391 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 391 2 B110 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Oldsmobile 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 1558 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1688UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Oldsmobile 98 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1559 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1689UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Plymouth Cricket Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1560 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1690UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Plymouth Fury II continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Gran Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1561 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1691UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Plymouth Satellite continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Catalina Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1562 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1692UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Pontiac GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 1 Grandville Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1693UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Rover 2000 continued Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 3500S Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Toyota Carina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Celica Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1694UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Toyota Corolla Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 1 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Mark II Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Stag Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1695UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1972 Position Application Attributes Application Notes Part NumberQty Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1971 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Matador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Centurion Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1566 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1696UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Buick Estate Wagon continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 1567 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1697UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Taxicab Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Biscayne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Brookwood Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 C10 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1568 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1698UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C20 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1569 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1699UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet C30 Pickup continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 260 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1570 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1700UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 Van continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G30 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1571 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1701UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1572 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1702UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 Pickup continued Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Kingswood Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 Monte Carlo Rear Shaft All Joints 101 (1,2) 5.7L; Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 6.6L; Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) 7.4L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) 7.4L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1573 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1703UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P20 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Townsman Rear Shaft All Joints Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross; Inside Lock Rings235 1 Vega Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chrysler 300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 248 2 Imperial Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 260 4 1574 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1704UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge B100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 1575 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1705UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge B200 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 B300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Colt Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 398 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 1576 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1706UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge Coronet continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D200 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 1577 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1707UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 1578 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1708UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge M300 continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 119 (1,2,3,4) Performance Grade; Grease Fitting in Bearing Cap; 4 Joint Driveshaft; 1.078" Bearing Cap Diameter 246 4 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; 1.127" Bearing Cap Diameter 248 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1579 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1709UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 P300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1580 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1710UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 1581 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1711UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Dodge W100 Pickup continued Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1582 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1712UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1583 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1713UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford Custom continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 E-200 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 1584 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1714UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 1585 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1715UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 1586 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1716UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford P-100 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Pinto Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1587 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1717UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1588 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1718UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 1589 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1719UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC C35/C3500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15/G1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G35/G3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1590 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1720UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1591 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1721UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1592 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1722UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Sprint Rear Shaft All Joints 101 (1,2) Automatic; AT218 Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic; AT218 Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) Automatic; THM350 Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Automatic; THM350 Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 1 1593 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1723UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty GMC Sprint continued Rear Shaft Rear Joint 101 (2) Automatic; THM350 Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) Automatic; THM350 Performance Grade; Grease Fitting in Bearing Cap 290 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross 355 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Performance Grade; Grease Fitting in Bearing Cap 290 1 International 1010 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 1110 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1210 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1310 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 1 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 M1100 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 1594 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1724UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty International M1100 continued Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 M1200 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 3 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 MA1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Scout Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Scout II Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XJ Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1725UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-2500 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1726UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Jeep J-4500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Jeepster Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 1597 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1727UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Jeep Wagoneer continued Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark III Rear Shaft Front Two Joints 203 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Two Joints 203 (1,2) Grease Fitting in Cross; Performance Grade 260 1 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mazda 1200 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft397 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft397 3 616 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 R100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 RX-2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 397 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1728UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Cyclone Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1599 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1729UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Mercury Montego continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 1200 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 240Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 521 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 B110 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 98 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Custom Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1730UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Cricket Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 1601 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1731UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Plymouth Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1602 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1732UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Plymouth Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 GTX Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1603 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1733UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Plymouth Scamp Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1604 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1734UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Pontiac Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Safari Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 1 Grandville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Ventura Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rolls-Royce Corniche Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1735UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Rover 2000 continued Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 3500S Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Toyota Carina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Celica Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Corolla Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 101 (1,2) 1.2L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1736UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1971 Position Application Attributes Application Notes Part NumberQty Toyota Corolla continued Rear Shaft All Joints 102 (1,2,3) 1.2L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 2 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 394 3 Rear Shaft All Joints 102 (1,2,3) 1.6L; Standard Grade; 3 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) 1.6L; Standard Grade; 2 Joint Driveshaft; Outside Lock Rings; Grease Fitting in Bearing Cap 395 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 1 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Stag Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1737UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Gremlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Hornet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rebel Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Estate Wagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 1608 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1738UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Buick Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Wildcat Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 1609 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1739UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Checker Marathon continued Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Taxicab Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Biscayne Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Brookwood Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. THM400 Trans. 369 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. THM400 Trans. 280 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 C10 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1610 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1740UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C20 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 1611 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1741UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 270 2 Rear Shaft All Joints 230 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 230 (1,2) Automatic Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Estate Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G30 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1742UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1613 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1743UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 1614 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1744UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet K30 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Kingswood Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P20 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 1615 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1745UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 Chrysler 300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 248 2 Imperial Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft 260 4 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 248 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1616 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1746UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Chrysler Newport continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge A100 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 A108 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Challenger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1617 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1747UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge Charger continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D200 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 1618 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1748UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D300 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 1619 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1749UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge M300 continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1620 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1750UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge P200 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.078" Bearing Cap Diameter 315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 1621 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1751UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 1622 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1752UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Dodge W100 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit 315 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit 315 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 315 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1623 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1753UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford Bronco Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Cross 429 1 Front Shaft Front Joint 106 (3) Grease Fitting in Cross; Performance Grade 250 1 Front Shaft Rear and Center Joint 106 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Front and Center Joints 106 (6,7) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Rear Shaft Rear Joint 106 (8) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Rear Joint 106 (8) Grease Fitting in Cross; Performance Grade 250 1 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 1624 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1754UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford Custom continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom 500 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-200 Econoline Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; Part Time Transfer Case 369 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; Part Time Transfer Case 280 3 1625 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1755UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross; Full Time Transfer Case 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade; Full Time Transfer Case 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Full Time Transfer Case; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 102 (1,2,3) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 1626 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1756UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 Fairlane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Falcon Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1627 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1757UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford Maverick Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Mustang Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 P-100 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 1 1628 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1758UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford P-350 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 1629 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1759UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Ford Torino continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 C15/C1500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 1630 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1760UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 G15/G1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G35/G3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Jimmy Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) 4WD Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 1 1631 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1761UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 1632 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1762UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Pickup continued Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 K35/K3500 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 1633 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1763UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty GMC K35/K3500 Pickup continued Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 P25/P2500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Diameter 231 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.188" Bearing Cap Diameter 232 2 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 1634 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1764UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty GMC P35/P3500 Van continued Rear Shaft All Joints Standard Grade; Grease Fitting in Cross 331 3 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.969" Bearing Cap Diameter 861 1 Steering Shaft Standard Grade; Grease Fitting in Center of Cross; 0.938" Bearing Cap Diameter 338 1 International 1000D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 1100D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 1635 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1765UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty International 1200D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1300D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft429 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft429 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 250 2 M1100 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 M1200 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 102 (1,2,3) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 3 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 1636 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1766UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty International MA1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Scout Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XJ Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1767UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Jeep Commando Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-2500 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-3500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-3600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-3700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 1638 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1768UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Jeep J-4500 continued Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-4800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Jeepster Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Sealed Unit; Inside Lock Rings 315 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) RWD Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 1639 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1769UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Range Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade 260 4 Mark III Rear Shaft Front Two Joints 203 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Two Joints 203 (1,2) Grease Fitting in Cross; Performance Grade 260 1 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mazda 1200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft397 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft397 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1770UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Mercury Cougar Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.8L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Cyclone Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1641 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1771UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Mercury Montego continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 240Z Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 521 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 B110 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 392 2 Oldsmobile 442 Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 265 1 98 Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Cutlass Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 4.1L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1772UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass continued Rear Shaft All Joints 101 (1,2) 4.1L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Cutlass Supreme Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1643 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1773UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Plymouth Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Duster Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1644 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1774UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Plymouth Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 GTX Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1645 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1775UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Plymouth Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; 1.078" Bearing Cap Diameter315 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Executive Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1646 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1776UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Pontiac Grand Prix continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 3500S Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 231 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1777UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Rover 3500S continued Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 331 4 Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross; 3 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2 Joint Rear Driveshaft; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 2 Joint Rear Driveshaft 232 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up; 3 Joint Rear Driveshaft 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Toyota Corolla Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 395 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 395 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 1 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1778UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1970 Position Application Attributes Application Notes Part NumberQty Triumph Stag Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 2 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1969 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Berlina Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 Spider Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rambler Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rebel Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1779UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Buick LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Special Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Wildcat Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 1650 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1780UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Cadillac Fleetwood continued Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Taxicab Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. THM400 Trans. 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. THM400 Trans. 280 2 Biscayne Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. THM400 Trans. 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. THM400 Trans. 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Blazer Front Shaft Front Joint 225 (3) 4WD Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) 4WD Grease Fitting in Cross; Performance Grade 280 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 1 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 101 (1) RWD; 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Front Joint 101 (1) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 1651 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1781UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft Rear Joint 101 (2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Brookwood Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. THM400 Trans. 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. THM400 Trans. 280 2 C10 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1652 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1782UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1653 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1783UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Transmission to Axle 6.5L; 270 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft Front Joint 101 (1) THM400 Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 1 Rear Shaft Front Joint 101 (1) THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 1 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Corvair Rear Half Shafts All Joints 222 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Half Shafts All Joints 222 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 270 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1784UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 230 (1,2) Automatic Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Estate Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Exc. THM400 Trans. 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Exc. THM400 Trans. 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1655 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1785UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1786UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Kingswood Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Nova Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Van Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1787UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P20 Van Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Chrysler 300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1658 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1788UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Chrysler 300 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Imperial Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge A108 Van Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Automatic Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Manual Grease Fitting in Cross; Performance Grade 245 1 1659 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1789UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Dodge A108 Van continued Rear Shaft Rear Joint 101 (2) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D200 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 1660 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1790UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D300 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1661 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1791UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Dodge Monaco continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P200 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1662 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1792UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 1663 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1793UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Dodge W200 Pickup continued Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Bronco Front Shaft Center Joint 106 (4) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 106 (5) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Center Joint 106 (7) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) Standard Grade; Grease Fitting in Bearing Cap 497 2 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 1664 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1794UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford Country Sedan continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 E-100 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1665 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1795UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford E-200 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Rear Shaft Center and Rear Joint 102 (2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Rear Shaft Front Joint 102 (1) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft330 1 Rear Shaft Front Joint 102 (1) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 295A 1 F-100 Front Shaft All Joints 128 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 120 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 2 Front Shaft All Joints 128 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 120 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 2 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 2 Front Wheels All Joints 120 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 2 Front Wheels All Joints 128 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 365 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 365 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 378 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 378 2 Rear Shaft All Joints 128 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 128 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 1666 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1796UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 1667 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1797UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 Fairlane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Falcon Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1668 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1798UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford LTD continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Mustang Rear Shaft All Joints 101 (1,2) 3.3L; 3-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.8L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 3.3L; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 3.3L; Automatic Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; Automatic Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P-350 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1669 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1799UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1670 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1800UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1671 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1801UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Suburban continued Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 280 3 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 1672 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1802UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Suburban continued Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 280 3 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 4.1L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 4.1L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4.8L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 4.8L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 5.0L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 5.0L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 5.7L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 5.7L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 6.5L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 102 (1) 6.5L; Automatic Grease Fitting in Cross; Performance Grade 260 1 G15/G1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1673 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1803UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1804UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K35/K3500 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1805UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 International 1000D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 1676 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1806UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty International 1000D continued Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1100D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1200D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1300D Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 1677 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1807UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty International 1300D continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 M1100 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 M1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 M1400 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 423 2 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 MA1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Scout Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 429 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 250 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1808UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Gladiator Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Front Shaft Center Joint 225 (4) Standard Grade; Inside Lock Rings; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 209 (3) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 497 1 Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 497 1 Front Shaft Rear Joint 225 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 505 1 Front Shaft Rear Joint 209 (4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 505 1 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 1679 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1809UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Jeep J-2500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 1680 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1810UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Jeep J-3500 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 J-3600 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 J-3700 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 1681 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1811UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Jeep J-3700 continued Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Jeepster Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Grease Fitting in Center of Cross 361 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft Center Joint 225 (4) 5.7L; Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 225 (3) 5.7L; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft505 1 Front Shaft Front Joint 209 (3) 5.7L; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft505 1 Front Shaft Rear Joint 225 (5) 5.7L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 209 (4) 5.7L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 1682 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1812UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Jeep Wagoneer continued Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 315G 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 317 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Performance Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 246 3 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 1 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Mark III Rear Shaft Front Two Joints 203 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Two Joints 203 (1,2) Grease Fitting in Cross; Performance Grade 260 1 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG 1300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 1683 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1813UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty MG MGC continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) 2.8L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 2.8L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 3.3L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 4.1L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 4.1L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 2.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 2.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 3.3L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.1L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 4.1L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 1684 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1814UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Mercury Cougar Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.8L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Cyclone Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.8L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 5.8L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.8L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 5.8L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 1685 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1815UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Mercury Marquis continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 521 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 Oldsmobile 442 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 6.6L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1816UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Oldsmobile 442 continued Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 98 Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Cutlass Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 4.1L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 4.1L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 6.6L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1687 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1817UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 1688 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1818UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Plymouth Fury II continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 GTX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1689 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1819UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Plymouth Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Executive Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1690 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1820UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Pontiac Tempest continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 3500S Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Toyota Corolla Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 395 2 Corona Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 1 Hi-Lux Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 390 3 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1821UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1969 Position Application Attributes Application Notes Part NumberQty Toyota Land Cruiser continued Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 390 3 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR250 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 164 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1968 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Giulia Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors AMX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 American Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Javelin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Rebel Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1822UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Special Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Wildcat Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cadillac Calais Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1823UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Fleetwood Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Biscayne Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1694 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1824UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 1695 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1825UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Transmission to Axle 270 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 1696 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1826UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Suburban continued Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Transmission to Axle 6.5L; 270 1 Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevy II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvair Rear Half Shafts All Joints 222 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Half Shafts All Joints 222 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 270 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1827UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 230 (1,2) Automatic Grease Fitting in Cross; Performance Grade 260 2 Rear Shaft All Joints 230 (1,2) Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Manual Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1698 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1828UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1829UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K30 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P10 Van Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1830UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P20 Van Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 Chrysler 300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Imperial Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 1701 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1831UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Chrysler New Yorker Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Newport Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Town & Country Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Dodge A108 Van Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Automatic Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 Charger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1702 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1832UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Dodge Charger continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Coronet Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 D100 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D200 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D300 Pickup Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 1703 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1833UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Dodge D300 Pickup continued Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 M300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Monaco Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 P100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 1704 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1834UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Dodge P100 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 P300 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 P300 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 1705 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1835UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Dodge P300 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Polara Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 W100 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 1706 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1836UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Dodge W200 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W300 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Anglia Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Bronco Front Shaft Center Joint 106 (4) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 106 (5) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Center Joint 106 (7) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 1707 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1837UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford Bronco continued Rear Shaft Front and Rear Joints 106 (6,8) Standard Grade; Grease Fitting in Bearing Cap 497 2 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1708 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1838UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford F-100 Front Shaft All Joints 120 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 2 Front Shaft All Joints 128 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 120 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 2 Front Shaft All Joints 128 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 2 Front Wheels All Joints 120 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 2 Front Wheels All Joints 128 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 365 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 365 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 378 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 378 2 Rear Shaft All Joints 128 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 128 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 1709 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1839UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 102 (1,2,3) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up 354 3 Rear Shaft All Joints 101 (1,2) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up 354 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.622" Outside Lock-Up 260 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Rear Shaft Front Joint 102 (1) RWD Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 102 (1) RWD Performance Grade; Sealed Unit; 3.622" Outside Lock-Up 345 1 1710 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1840UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford Fairlane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Falcon Rear Shaft All Joints 101 (1,2) 2.8L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft All Joints 101 (1,2) 3.3L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1711 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1841UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford LTD continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Mustang Rear Shaft All Joints 101 (1,2) 3.3L; 3-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 3.3L; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 3.3L; Automatic Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; Automatic Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P-350 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1712 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1842UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Ford Ranch Wagon continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Torino Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1713 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1843UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C15/C1500 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1714 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1844UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Suburban continued Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 354 1 Rear Shaft Front Joint 102 (1) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 280 3 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 280 3 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 1715 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1845UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC C35/C3500 Pickup continued Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 4.1L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 4.1L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4.8L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 4.8L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 5.0L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 5.0L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 5.3L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 5.3L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 5.7L; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 5.7L; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 6.5L; Automatic Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 102 (1) 6.5L; Automatic Grease Fitting in Cross; Performance Grade 260 1 G15/G1500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 1716 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1846UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K35/K3500 Pickup Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1847UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC K35/K3500 Pickup continued Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Front Shaft All Joints 208 (3,5) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 369 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit; 1.188" Bearing Cap Diameter231 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.188" Bearing Cap Diameter 331 1 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.188" Bearing Cap Diameter 232 1 P15/P1500 Van Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1718 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1848UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty GMC P15/P1500 Van continued Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 International 1000C Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1100C Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 1719 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1849UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty International 1100C continued Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1200C Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1300C Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross 374 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 M1100 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 102 (1,2,3) 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 3 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross 429 3 M1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 1720 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1850UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty International M1200 continued Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 MA1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Scout Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 429 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 250 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ5A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1851UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Jeep CJ5A continued Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Gladiator Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 3 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 3 Front Shaft Center Joint 225 (4) Standard Grade; Inside Lock Rings; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 225 (3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 497 1 Front Shaft Front Joint 209 (3) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; Inside Lock Rings 497 1 Front Shaft Rear Joint 209 (4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 505 1 Front Shaft Rear Joint 225 (5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 505 1 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 1722 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1852UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Jeep J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3500 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 1723 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1853UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Jeep J-3500 continued Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 J-3600 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 1724 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1854UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Jeep J-3700 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 2 Front Shaft All Joints 225 (3,4,5) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Shaft All Joints 209 (3,4) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit; 2 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit; 3 Joint Front Driveshaft 365 2 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 369 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 369 2 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 280 2 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 380 2 1725 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1855UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Jeep J-3800 continued Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 380 3 Jeepster Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Grease Fitting in Center of Cross 361 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft Center Joint 225 (4) 5.3L; 4WD Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Center Joint 225 (4) 5.7L; Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 225 (3) 5.3L; 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft505 1 Front Shaft Front Joint 209 (3) 5.3L; 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft505 1 Front Shaft Front Joint 225 (3) 5.7L; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft505 1 Front Shaft Front Joint 209 (3) 5.7L; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft505 1 Front Shaft Rear Joint 209 (4) 5.3L; 4WD Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 225 (5) 5.3L; 4WD Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 209 (4) 5.7L; Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 225 (5) 5.7L; Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 497 1 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 378 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Front Driveshaft 315G 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross; 2 Joint Front Driveshaft 315G 3 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 317 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 317 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade; 3 Joint Front Driveshaft 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade; 2 Joint Front Driveshaft 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Performance Grade; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft 246 3 Rear Shaft All Joints 225 (6,7,8) 4WD Performance Grade; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft 246 3 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 1 1726 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1856UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Mark III Rear Shaft Front Two Joints 203 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Two Joints 203 (1,2) Grease Fitting in Cross; Performance Grade 260 1 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG 1300 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGC Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Magnette Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) 2.8L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 2.8L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 3.3L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1857UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Mercury Comet continued Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 2.8L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 2.8L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 3.3L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 3.3L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Cougar Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Cyclone Rear Shaft Front Joint 101 (1) 5.0L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 5.0L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 5.0L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 5.0L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 1728 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1858UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Mercury Cyclone continued Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montclair Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montego Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1729 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1859UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Mercury Park Lane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 510 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 393 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 2 520 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 521 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 Oldsmobile 442 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 6.6L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 98 Rear Shaft All Joints 270 2 Rear Shaft Front Joint 101 (1) 7.5L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.5L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 7.5L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.5L; Grease Fitting in Cross; Performance Grade 265 1 Cutlass Rear Shaft All Joints 270 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1860UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass continued Rear Shaft All Joints 101 (1,2) 4.1L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 4.1L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 6.6L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delmont 88 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) 5.7L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 5.7L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) 6.6L; Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) 6.6L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 1731 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1861UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury I Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Fury II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 1732 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1862UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Plymouth Fury III Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 GTX Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Road Runner Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1733 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1863UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Plymouth Valiant continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Executive Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 1734 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1864UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Pontiac Parisienne continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Rover 2000 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit; 3.624" Outside Lock-Up 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 3.624" Outside Lock-Up 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross; 2.937" Outside Lock-Up 344 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade; 3.624" Outside Lock-Up 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Toyota Corolla Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 395 2 Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Center of Cross 387 3 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Center of Cross 285 1 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Stout Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 389 2 Triumph GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1865UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1968 Position Application Attributes Application Notes Part NumberQty Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR250 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 145 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1967 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Giulia Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 American Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 498 1 Rear Shaft Rear Joint 101 (1) Standard Grade; Grease Fitting in Cross; (4)1.000" Bearing Cap Diameter 515 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; (2)1.000" Bearing Caps & (2)1.125" Bearing Caps 498 1 Marlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rebel Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1866UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Buick Electra continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Gran Sport Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Special Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 4 Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1867UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Buick Sportwagon continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Wildcat Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Cadillac Calais Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 5 Joint Driveshaft 534G 5 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; 5 Joint Driveshaft; Inside Lock Rings 235 5 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevrolet Bel Air Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1868UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet Bel Air continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Biscayne Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Panel Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 1739 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1869UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Panel continued Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C10 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C10 Suburban Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 1740 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1870UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C20 Panel Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 3-Speed Manual or Automatic Transmission 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 3-Speed Manual or Automatic Transmission 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; w/ 4-Speed Manual Transmission 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 4-Speed Manual Transmission 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 4-Speed Manual Transmission 232 2 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 280 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 1741 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1871UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Caprice Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Chevy II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvair Rear Half Shafts All Joints 222 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Half Shafts All Joints 222 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1872UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K10 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K20 Panel Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1873UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Panel continued Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K20 Suburban Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1874UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 Malibu Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P20 Series Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1875UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 Series continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Chrysler 300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Imperial Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 New Yorker Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Newport Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Dodge A108 Van Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Automatic Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Manual Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Manual Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Manual Performance Grade; Grease Fitting in Bearing Cap 246 1 1746 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1876UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Dodge Charger Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Coronet Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 D100 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D200 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 D300 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 1747 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1877UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Dodge D300 Series continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Monaco Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 P100 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 P200 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 1748 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1878UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Dodge P200 Van continued Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Polara Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 W100 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1749 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1879UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Dodge W200 Series continued Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 W300 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1750 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1880UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford Anglia Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Bronco Front Shaft Center Joint 106 (4) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 106 (5) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Center Joint 106 (7) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) Standard Grade; Grease Fitting in Bearing Cap 497 2 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 1751 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1881UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford Custom continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 514G 2 F-100 Front Shaft All Joints 120 (3,4) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 369 2 Front Shaft All Joints 128 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 369 3 Front Shaft All Joints 128 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 280 3 Front Shaft All Joints 120 (3,4) 4WD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 280 2 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 1 Piece Rear Driveshaft 231 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings; 2 Piece Rear Driveshaft 231 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 2 Piece Rear Driveshaft 331 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings; 1 Piece Rear Driveshaft 331 2 Front Wheels All Joints 128 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 2 Piece Rear Driveshaft 232 2 Front Wheels All Joints 120 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings; 1 Piece Rear Driveshaft 232 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 2 Piece Rear Driveshaft 365 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings; 1 Piece Rear Driveshaft 365 2 Front Wheels All Joints 128 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 2 Piece Rear Driveshaft 378 2 Front Wheels All Joints 120 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings; 1 Piece Rear Driveshaft 378 2 Rear Shaft All Joints 128 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 128 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 1752 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1882UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) RWD Standard Grade; Grease Fitting in Cross; 1.063" Bearing Cap Diameter 353 2 Rear Shaft Center and Rear Joint 102 (2,3) RWD Grease Fitting in Cross; Performance Grade; 1.063" Bearing Cap Diameter 275 2 Rear Shaft Front Joint 102 (1) RWD Standard Grade; Grease Fitting in Cross; 3.220" Outside Lock-Up 369 1 Rear Shaft Front Joint 102 (1) RWD Grease Fitting in Cross; Performance Grade; 3.220" Outside Lock-Up 280 1 Fairlane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1753 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1883UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford Falcon Rear Shaft All Joints 101 (1,2) 2.8L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft All Joints 101 (1,2) 3.3L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 Galaxie Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Mustang Rear Shaft All Joints 101 (1,2) 3.3L; 3-Speed; Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 3.3L; Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross 429 1 1754 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1884UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Front Joint 101 (1) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 7.0L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Rear Shaft Rear Joint 101 (2) 7.0L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 7.0L; Grease Fitting in Cross; Performance Grade 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P-350 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 1755 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1885UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 GMC C15/C1500 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 1756 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1886UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Pickup continued Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; Performance Grade 280 3 C25/C2500 Suburban Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 3-Speed Manual or Automatic Transmission 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 3-Speed Manual or Automatic Transmission 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; w/ 4-Speed Manual Transmission 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 4-Speed Manual Transmission 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 4-Speed Manual Transmission 232 2 C35/C3500 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 G15/G1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G25/G2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) Standard Grade; Grease Fitting in Cross 369 1 Front Shaft Front Joint 225 (3) Grease Fitting in Cross; Performance Grade 280 1 1757 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1887UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Suburban continued Front Shaft Rear and Center Joint 225 (4,5) Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Wheels All Joints 225 (1,2) Standard Grade; Sealed Unit 365 1 Front Wheels All Joints 225 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 1 Rear Shaft All Joints 225 (6,7,8) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 225 (6,7,8) Grease Fitting in Cross; Performance Grade 280 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 K25/K2500 Suburban Front Wheels All Joints 208 (7,8) Standard Grade; Sealed Unit 231 1 Front Wheels All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Front Wheels All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 Intermediate Shaft Front Joint Standard Grade; Grease Fitting in Cross; w/ 4-Speed Manual Transmission 331 1 Intermediate Shaft Front Joint Grease Fitting in Cross; Performance Grade; w/ 4-Speed Manual Transmission 232 1 Intermediate Shaft Front and Rear Joints Standard Grade; Grease Fitting in Cross; w/ 3-Speed Manual or Automatic Transmission 369 2 Intermediate Shaft Front and Rear Joints Grease Fitting in Cross; Performance Grade; w/ 3-Speed Manual or Automatic Transmission 280 2 Intermediate Shaft Rear Joint Standard Grade; Grease Fitting in Cross; w/ 4-Speed Manual Transmission 369 1 Intermediate Shaft Rear Joint Grease Fitting in Cross; Performance Grade; w/ 4-Speed Manual Transmission 280 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 3-Speed Manual or Automatic Transmission 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 3-Speed Manual or Automatic Transmission 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; w/ 4-Speed Manual Transmission 231 2 1758 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1888UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; w/ 4-Speed Manual Transmission 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; w/ 4-Speed Manual Transmission 232 2 P15/P1500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 P25/P2500 Van Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 101 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P35/P3500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 232 3 International 1000B Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1100B Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 1759 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1889UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty International 1100B continued Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1200B Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1300B Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 M1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 M1400 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 423 2 M700 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 MA1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 5-Speed; Manual Standard Grade; Grease Fitting in Cross 423 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 1760 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1890UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty International MA1200 continued Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 Scout Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 429 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 250 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ5A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1891UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Jeep CJ6A continued Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Gladiator Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 1762 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1892UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Jeep J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 1763 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1893UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Jeep J-3800 continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Jeepster Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Grease Fitting in Center of Cross 361 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 1 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG 1100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 1764 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1894UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty MG MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Magnette Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Ghibli Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mercury Brougham Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Caliente Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 1765 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1895UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Mercury Comet continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Cougar Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Front Joint 101 (1) 6.4L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) 6.4L; Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 6.4L; Standard Grade; Grease Fitting in Cross 434 1 Rear Shaft Rear Joint 101 (2) 6.4L; Grease Fitting in Cross; Performance Grade 265 1 Cyclone Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marquis Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1766 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1896UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Mercury Montclair Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Park Lane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 411 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 520 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1767 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1897UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Oldsmobile 442 continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delmont 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 270 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 1768 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1898UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Oldsmobile F85 continued Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 4.5L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 4.5L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 1769 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1899UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Plymouth Fury Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 GTX Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Satellite Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 4.5L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 4.5L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 1770 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1900UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Plymouth Satellite continued Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 VIP Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Executive Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Firebird Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 1771 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1901UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird continued Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 355 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap; Incl. 2 Inside and 2 Outside Lock Rings 290 1 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Corona Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 394 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 394 3 1772 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1902UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1967 Position Application Attributes Application Notes Part NumberQty Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Stout Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 389 2 Triumph 2000 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 GT6 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR250 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 142 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 144 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1966 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Giulia Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 515 1 American Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 498 1 Rear Shaft Rear Joint 101 (1) Standard Grade; Grease Fitting in Cross; (4)1.000" Bearing Cap Diameter 515 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; (2)1.000" Bearing Caps & (2)1.125" Bearing Caps 498 1 Classic Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Bearing Cap 514G 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1903UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty American Motors Marlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Gran Sport Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 LeSabre Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 2 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 2 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Special Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 4 Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1904UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Buick Special continued Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Sportwagon Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Wildcat Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Cadillac Calais Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 5 Joint Driveshaft 534G 5 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; 5 Joint Driveshaft; Inside Lock Rings 235 5 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1905UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Checker Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevrolet Bel Air Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Biscayne Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 C10 Panel Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1776 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1906UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Panel continued Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C10 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 1777 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1907UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 C30 Panel Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 Caprice Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 1778 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1908UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice continued Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevy II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvair Rear Half Shafts All Joints 222 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Half Shafts All Joints 222 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings 369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings 534G 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1909UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 K10 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Sealed Unit; HD Transmission 231 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission331 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 232 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; Standard Duty Transmission 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; Standard Duty Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission369 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 280 2 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1910UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 Malibu Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P20 Series Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Series Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1911UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Chrysler 300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Imperial Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 New Yorker Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Newport Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Dodge A100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 A100 Truck Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Charger Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 1782 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1912UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Dodge Charger continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Coronet Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 D100 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 D200 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 D300 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 1783 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1913UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Dodge D300 Series continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Dart Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Monaco Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 P100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Polara Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 1784 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1914UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Dodge W100 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Take Off To Winch 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1785 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1915UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Dodge W200 Series continued Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 W300 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Fiat 124 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 Ford Anglia Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Bronco Front Shaft Center Joint 106 (4) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Front Shaft Front Joint 106 (3) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Shaft Rear Joint 106 (5) Standard Grade; Grease Fitting in Bearing Cap 497 1 Front Wheels All Joints 106 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 106 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft Center Joint 106 (7) Standard Grade; Grease Fitting in Cross & Bearing Cap 513 1 Rear Shaft Front and Rear Joints 106 (6,8) Standard Grade; Grease Fitting in Bearing Cap 497 2 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1786 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1916UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Ford Country Sedan continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 514G 2 F-100 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 128 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 1787 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1917UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Ford F-100 continued Rear Shaft All Joints 128 (6,7,8) 4WD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 F-350 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Fairlane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 1788 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1918UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Ford Fairlane continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Falcon Rear Shaft All Joints 101 (1,2) 2.8L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft All Joints 101 (1,2) 3.3L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 Galaxie Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1789 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1919UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Ford Mustang Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P-350 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Ranch Wagon Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 1790 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1920UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Ford Ranchero continued Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 GMC 1000 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 G1000 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 I1500 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 I2500 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 K1000 Front Wheels All Joints Standard Grade; Grease Fitting in Cross 331 2 Front Wheels All Joints Standard Grade; Sealed Unit 365 2 K15/K1500 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 1791 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1921UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty GMC K15/K1500 Pickup continued Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Sealed Unit; HD Transmission 231 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission331 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 232 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; Standard Duty Transmission 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; Standard Duty Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission369 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 280 2 PB1000 Series Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1922UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty GMC PB15 Series Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 PB25 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 PB2500 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 PB3500 Van Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 1793 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1923UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty GMC PB3500 Van continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 International 1000A Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1100A Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1200A Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 1300A Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 429 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 250 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 429 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 429 2 1794 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1924UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty International 1300A continued Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 M1200 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 3-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; 4-Speed; Manual Grease Fitting in Cross; Performance Grade 250 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD; Automatic Grease Fitting in Cross; Performance Grade 250 2 M1400 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 423 2 M700 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Scout Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 429 3 Front Shaft All Joints 225 (3,4,5) 4WD Grease Fitting in Cross; Performance Grade 250 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 429 3 Rear Shaft All Joints 225 (6,7,8) 4WD Grease Fitting in Cross; Performance Grade 250 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 429 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 250 2 Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ3 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1925UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 continued Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ5A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6A Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Commando Front Shaft All Joints 209 (3,4) 2.2L; Standard Grade; Flush Type Grease Fitting in Cross 379 2 Front Shaft All Joints 209 (3,4) 3.7L; Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) 3.7L; Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Gladiator Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 1796 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1926UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Jeep J-100 continued Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 1797 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1927UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Jeep J-3500 continued Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Front Shaft All Joints 209 (3,4) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Inside Lock Rings; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Cross 315G 3 Rear Shaft All Joints 209 (5,6,7) 4WD Standard Grade; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 209 (5,6,7) 4WD Grease Fitting in Cross; Performance Grade 245 3 Rear Shaft All Joints 209 (5,6,7) 4WD Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) RWD Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) RWD Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) RWD Performance Grade; Grease Fitting in Bearing Cap 246 1 1798 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1928UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG 1100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Magnette Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Maserati Mexico Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Mercury Caliente Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1799 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1929UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Mercury Comet Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Cyclone Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Montclair Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 1800 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1930UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Mercury Monterey continued Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Park Lane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Oxford Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 411 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 520 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 1801 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1931UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 F85 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Jetstar 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 1802 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1932UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Oldsmobile Vista Cruiser continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 4.5L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 4.5L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Fury Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 1803 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1933UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Plymouth Fury continued Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Satellite Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 3.7L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 3.7L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 3.7L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 4.5L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 4.5L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 4.5L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 5.2L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 5.2L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 5.2L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) 6.3L; Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) 6.3L; Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) 6.3L; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 101 (1,2) 7.0L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.0L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.0L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Rear Shaft All Joints 101 (1,2) 7.2L; Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) 7.2L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings316 2 Rear Shaft All Joints 101 (1,2) 7.2L; Grease Fitting in Cross; Performance Grade; Inside Lock Rings 248 2 Valiant Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 1804 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1934UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Plymouth Valiant continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 1.127" Bearing Cap Diameter 316 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; 1.127" Bearing Cap Diameter 248 2 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 1805 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1935UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1966 Position Application Attributes Application Notes Part NumberQty Rolls-Royce Silver Shadow Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1965 Position Application Attributes Application Notes Part NumberQty Alfa Romeo Giulia Rear Shaft Rear Joint 101 (2) Standard Grade; Sealed Unit 413 1 American Motors Ambassador Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 515 1 American Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross 498 1 Rear Shaft Rear Joint 101 (1) Standard Grade; Grease Fitting in Cross; (4)1.000" Bearing Cap Diameter 515 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; (2)1.000" Bearing Caps & (2)1.125" Bearing Caps 498 1 Classic Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Bearing Cap 514G 1 Marlin Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Avanti II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1936UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Gran Sport Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeSabre Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft 534G 3 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft 534G 3 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; Inside Lock Rings 235 3 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Riviera Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Skylark Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Special Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Sportwagon Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Wildcat Rear Shaft All Joints 119 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 4 Rear Shaft All Joints 119 (1,2,3,4) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 4 Rear Shaft Two Center Joints 119 (2,3) Standard Grade; Sealed Unit; 4 Joint Driveshaft 492 1 Cadillac Calais Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 5 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1937UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Cadillac Calais continued Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 5 Commercial Chassis Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 3 DeVille Rear Shaft All Joints 200 (1,2,3,4,5) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 5 Joint Driveshaft 534G 5 Rear Shaft All Joints 203 (1,2,3,4) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 4 Joint Driveshaft 534G 4 Rear Shaft All Joints 203 (1,2,3,4) Grease Fitting in Cross; Performance Grade; 4 Joint Driveshaft; Inside Lock Rings 235 4 Rear Shaft All Joints 200 (1,2,3,4,5) Grease Fitting in Cross; Performance Grade; 5 Joint Driveshaft; Inside Lock Rings 235 5 Fleetwood Rear Shaft All Joints 215 (1,2,3,4,5,6) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 6 Joint Driveshaft 534G 6 Rear Shaft All Joints 218 (1,2,3) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings 534G 3 Rear Shaft All Joints 215 (1,2,3,4,5,6) Grease Fitting in Cross; Performance Grade; 6 Joint Driveshaft; Inside Lock Rings 235 6 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 3 Checker Aerobus Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Marathon Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevrolet Bel Air Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Biscayne Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 C10 Panel Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 1808 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1938UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Panel continued Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C10 Pickup Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; Powerglide Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; Powerglide Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic; THM350 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic; THM350 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1809 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1939UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Pickup continued Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Center and Rear Joint 102 (2,3) Automatic; THM400 Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic Grease Fitting in Cross; Performance Grade 232 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Standard Grade; Sealed Unit 231 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 C30 Panel Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 1810 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1940UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet C30 Panel continued Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 Chevelle Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Chevy II Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvair Rear Half Shafts All Joints 222 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Half Shafts All Joints 222 (1,2) Grease Fitting in Cross; Performance Grade 280 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Sealed Unit 231 4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 331 4 Rear Half Shafts All Joints 230 (3,4,5,6) Grease Fitting in Cross; Performance Grade 232 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 230 (1,2) Grease Fitting in Cross; Performance Grade 280 2 El Camino Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft Front Joint 101 (1) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 1 G10 Van Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Impala Rear Shaft All Joints 218 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1941UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala continued Rear Shaft All Joints 218 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 K10 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Sealed Unit; HD Transmission 231 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission331 1 Intermediate Shaft Front Joint 208 (4) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 232 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; Standard Duty Transmission 369 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; Standard Duty Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; HD Transmission369 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade; HD Transmission 280 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 280 2 K20 Pickup Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 280 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 1 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 1 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 1 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Sealed Unit 231 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1942UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 232 2 Malibu Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P10 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 P20 Series Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Sealed Unit 231 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross 331 3 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual Grease Fitting in Cross; Performance Grade 232 3 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Sealed Unit 231 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft Center and Rear Joint 102 (2,3) Automatic Grease Fitting in Cross; Performance Grade 232 2 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) 3-Speed; Manual Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) Automatic Standard Grade; Grease Fitting in Cross 369 1 Rear Shaft Front Joint 102 (1) Automatic Grease Fitting in Cross; Performance Grade 280 1 P30 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1943UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Chrysler 300 Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Inside Lock Rings315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 246 2 Imperial Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 New Yorker Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Newport Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Dodge 880 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 A100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 A100 Truck Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 1814 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1944UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Dodge A100 Truck continued Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Coronet Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 D100 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 D200 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 D300 Series Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.078" Bearing Cap Diameter 315G 3 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 3 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 2 1815 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1945UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Dodge D300 Series continued Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 1.078" Bearing Cap Diameter 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.230" Bearing Cap Diameter 304 3 Dart Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Monaco Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 P100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 P200 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft315G 3 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap 317 3 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 245 2 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 245 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Performance Grade; Grease Fitting in Bearing Cap 246 3 Polara Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 W100 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap 246 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 1816 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1946UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Dodge W100 Series continued Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap 246 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap 246 2 W200 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Front Shaft All Joints 208 (3,5) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Front Shaft All Joints 208 (3,5) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.078" Bearing Cap Diameter 315G 2 1817 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1947UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Dodge W200 Series continued Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 317 2 Rear Shaft All Joints 208 (7,8) Grease Fitting in Cross; Performance Grade; 1.078" Bearing Cap Diameter 245 2 Rear Shaft All Joints 208 (7,8) Performance Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Diameter 246 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 1.230" Bearing Cap Diameter 304 2 W300 Series Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Front Shaft All Joints 208 (3,5) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Intermediate Shaft Front and Rear Joints 208 (4,6) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 338 1 Power Take Off To Winch Standard Grade; Grease Fitting in Bearing Cap 1502 1 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Cross; 3" O.D. Yoke 304 2 Rear Shaft All Joints 208 (7,8) Standard Grade; Grease Fitting in Center of Cross; 2" O.D. Yoke 305 2 Ford Anglia Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Cortina Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Country Sedan Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Country Squire Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Custom Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 1818 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1948UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Ford Custom continued Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Econoline Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 280 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 514G 2 F-100 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 F-250 Front Shaft All Joints 208 (3,5) 4WD Standard Grade; Grease Fitting in Cross 353 2 Front Shaft All Joints 208 (3,5) 4WD Grease Fitting in Cross; Performance Grade 275 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Front Wheels All Joints 208 (1,2) 4WD Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Sealed Unit; Inside Lock Rings 365 2 Front Wheels All Joints 208 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap; Inside Lock Rings 378 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Standard Grade; Grease Fitting in Cross 369 2 1819 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1949UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft All Joints 208 (7,8) 4WD Standard Grade; Grease Fitting in Cross 353 2 Rear Shaft All Joints 208 (7,8) 4WD Grease Fitting in Cross; Performance Grade 275 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 3.220" Outside Lock-Up 369 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 3.220" Outside Lock-Up 369 2 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade; 3.220" Outside Lock-Up 280 2 F-350 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 2 Rear Shaft All Joints 102 (1,2,3) RWD Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 3 Rear Shaft All Joints 102 (1,2,3) RWD Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 3 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 2 Fairlane Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Falcon Rear Shaft All Joints 101 (1,2) 2.8L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft All Joints 101 (1,2) 3.3L; Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) 4.3L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 4.3L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Front Joint 101 (1) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 255 1 Rear Shaft Rear Joint 101 (2) 4.3L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 4.3L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) 4.3L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) 4.7L; Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 1820 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1950UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Ford Falcon continued Rear Shaft Rear Joint 101 (2) 4.7L; Standard Grade; Grease Fitting in Cross; Inside Lock Rings498 1 Galaxie Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Galaxie 500 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 LTD Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Mustang Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 1821 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1951UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 P-100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 280 2 P-350 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Ranch Wagon Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Ranchero Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up; Incl. Inside and Outside Lock Rings 433 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1822 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1952UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 GMC 1000 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1500 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 G1000 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 PB1000 Series Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 1823 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1953UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty GMC PB1500 Series Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Automatic Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Automatic Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 102 (1,2,3) Automatic Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 101 (1,2) Automatic Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 PB2500 Series Rear Shaft All Joints 102 (1,2,3) Standard Grade; 3 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 101 (1,2) Standard Grade; 2 Joint Driveshaft; Sealed Unit 231 1 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft331 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft331 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 232 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 232 1 Suburban Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft369 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade 280 1 Rear Shaft All Joints 102 (1,2,3) Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade 280 1 International AM120 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 AM130 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 M1400 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 423 2 1824 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1954UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty International M700 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 M800 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD Grease Fitting in Cross; Performance Grade 280 2 Scout Front Shaft All Joints 225 (3,4,5) 4WD Standard Grade; Grease Fitting in Cross 505 3 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 225 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 225 (6,7,8) 4WD Standard Grade; Grease Fitting in Cross 505 3 Rear Shaft All Joints 101 (1,2) RWD Standard Grade; Grease Fitting in Cross 505 2 Jaguar XKE Rear Half Shafts All Joints 219 (4,5,6,7) Standard Grade; Grease Fitting in Cross 330 4 Rear Half Shafts All Joints 219 (4,5,6,7) Grease Fitting in Cross; Performance Grade 295A 4 Rear Shaft All Joints 219 (1,2,3) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 219 (1,2,3) Grease Fitting in Cross; Performance Grade 280 3 Jeep CJ3 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ5 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 CJ6 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Gladiator Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1955UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Jeep Gladiator continued Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 J-100 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-200 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-210 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-220 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-230 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 1826 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1956UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Jeep J-230 continued Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-2800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-300 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-310 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 1827 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1957UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Jeep J-310 continued Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-320 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-330 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3500 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3600 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3700 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 1828 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1958UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Jeep J-3700 continued Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 J-3800 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Bearing Cap 380 2 Front Wheels All Joints 209 (1,2) Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Bearing Cap 380 3 Wagoneer Front Shaft All Joints 209 (3,4) 4WD Standard Grade; Grease Fitting in Center of Cross 361 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Sealed Unit 365 2 Front Wheels All Joints 209 (1,2) 4WD Standard Grade; Grease Fitting in Bearing Cap 378 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Standard Grade; Grease Fitting in Cross 369 2 Rear Shaft All Joints 101 (1,2) RWD; Manual Grease Fitting in Cross; Performance Grade 280 2 Rear Shaft Front Joint 209 (5) 4WD Standard Grade; Grease Fitting in Cross 515 1 Rear Shaft Front Joint 101 (1) RWD; Automatic Standard Grade; Grease Fitting in Cross 515 1 Rear Shaft Rear Joint 209 (7) 4WD Standard Grade; Grease Fitting in Cross 505 1 Rear Shaft Rear Joint 101 (2) RWD; Automatic Standard Grade; Grease Fitting in Cross 505 1 Land Rover Land Rover Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Cross 369 2 Front Shaft All Joints 209 (3,4) Grease Fitting in Cross; Performance Grade 280 2 Power Take Off To Winch Standard Grade; Grease Fitting in Cross 369 1 Power Take Off To Winch Grease Fitting in Cross; Performance Grade 280 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Cross 369 3 Rear Shaft All Joints 209 (5,6,7) Grease Fitting in Cross; Performance Grade 280 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross 354 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 260 2 Lotus Elan Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MG 1100 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 MGB Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Magnette Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Midget Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 1829 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1959UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Mercury Caliente Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Automatic Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Automatic Grease Fitting in Cross; Performance Grade 255 1 Colony Park Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Comet Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Automatic Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Automatic Grease Fitting in Cross; Performance Grade 255 1 Cyclone Rear Shaft All Joints 101 (1,2) Manual Standard Grade; Grease Fitting in Bearing Cap 514G 2 Rear Shaft Front Joint 101 (1) Automatic Standard Grade; Grease Fitting in Cross 429 1 Rear Shaft Front Joint 101 (1) Automatic Grease Fitting in Cross; Performance Grade 250 1 Rear Shaft Rear Joint 101 (2) Automatic Standard Grade; Grease Fitting in Cross 430 1 Rear Shaft Rear Joint 101 (2) Automatic Grease Fitting in Cross; Performance Grade 255 1 Marauder Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 1830 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1960UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Mercury Montclair Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Monterey Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Park Lane Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 260 1 Rear Shaft Front Joint 101 (1) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 429 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 250 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.217" Outside Lock-Up 430 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.217" Outside Lock-Up 255 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; 3.622" Outside Lock-Up 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; 3.622" Outside Lock-Up 265 1 Morris Minor Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 1831 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1961UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Morris Oxford Rear Shaft All Joints Grease Fitting in Bearing Cap 341BL 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 340 2 Nissan 410 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 411 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 520 Pickup Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 391 3 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 98 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Rear Shaft Front Joint 101 (1) Incl. Inside Lock Rings; Standard Grade; Grease Fitting in Cross; Outside Lock Rings 354 1 Rear Shaft Front Joint 101 (1) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 260 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross; Incl. 2 Inside and 2 Outside Lock Rings 434 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade; Incl. 2 Inside and 2 Outside Lock Rings 265 1 Cutlass Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Delta 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 1832 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1962UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Oldsmobile F85 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Jetstar 88 Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Jetstar I Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Starfire Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit; Outside Lock Rings 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross; Outside Lock Rings 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Outside Lock Rings 232 2 Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross; Inside Lock Rings 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings; Inside Lock Rings 235 2 Plymouth Barracuda Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 2 1833 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1963UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1835 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1964UNIVERSAL JOINTS Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Plymouth Barracuda continued Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 2 Belvedere Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Fury Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Satellite Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft All Joints 101 (1,2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Valiant Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Cross 315G 1 Rear Shaft Rear Joint 101 (2) Standard Grade; Grease Fitting in Bearing Cap 317 1 Rear Shaft Rear Joint 101 (2) Grease Fitting in Cross; Performance Grade 245 1 Rear Shaft Rear Joint 101 (2) Performance Grade; Grease Fitting in Bearing Cap 246 1 Pontiac Bonneville Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Catalina Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 GTO Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Grand Prix Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 LeMans Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Parisienne Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 1834 Precision Driveline Universal Joints 1965 Position Application Attributes Application Notes Part NumberQty Pontiac Star Chief Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Tempest Rear Shaft All Joints 101 (1,2) Incl. 4 Outside Lock Rings; Standard Grade; Grease Fitting in Cross 534G 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade; Inside Lock Rings 235 2 Rolls-Royce Phantom Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Silver Cloud Rear Shaft All Joints 101 (1,2) Standard Grade; Sealed Unit 231 2 Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 331 2 Rear Shaft All Joints 101 (1,2) Grease Fitting in Cross; Performance Grade 232 2 Sunbeam Alpine Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 341 2 Tiger Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Toyota Crown Rear Shaft All Joints 101 (1,2) Standard Grade; Grease Fitting in Bearing Cap 394 2 Land Cruiser Front Shaft All Joints 209 (3,4) Standard Grade; Grease Fitting in Center of Cross 396 2 Power Take Off To Winch Standard Grade; Grease Fitting in Center of Cross 396 1 Rear Shaft All Joints 209 (5,6,7) Standard Grade; Grease Fitting in Center of Cross 396 3 Triumph Spitfire Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 341 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 341 2 TR4 Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 TR4A Rear Half Shafts All Joints 230 (3,4,5,6) Standard Grade; Grease Fitting in Cross 344 4 Rear Shaft All Joints 230 (1,2) Standard Grade; Grease Fitting in Cross 344 2 Volvo 122 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 1800 Rear Shaft All Joints 102 (1,2,3) Standard Grade; Grease Fitting in Cross 341 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1965UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2013 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Center Joint 225 (7) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 2012 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 2011 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Ford F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 1836 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1966UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2011 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 2010 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1837 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1967UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2010 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 1838 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1968UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2010 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Mazda B4000 Front Shaft Front Joint 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 2009 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 1839 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1969UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2009 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade continued Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 1840 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1970UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe continued Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1841 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1971UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2009 Position Application Attributes Application Notes Part NumberQty GMC Savana 2500 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Saab 9-7x Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 1842 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1972UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2009 Position Application Attributes Application Notes Part NumberQty Saab 9-7x continued Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 2008 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1843 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1973UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 1844 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1974UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2008 Position Application Attributes Application Notes Part NumberQty GMC Envoy continued Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 1845 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1975UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2008 Position Application Attributes Application Notes Part NumberQty Isuzu Ascender continued Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 i-290 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 i-370 Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Saab 9-7x Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 2007 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 1846 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1976UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 continued Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 Classic Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Classic Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Classic Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Classic Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 1847 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1977UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 1848 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1978UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2007 Position Application Attributes Application Notes Part NumberQty GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) AWD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Classic Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 1849 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1979UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2007 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 Classic continued Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 HD Classic Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Classic Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Classic Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 1850 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1980UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2007 Position Application Attributes Application Notes Part NumberQty Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 i-290 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 i-370 Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Mercury Mariner Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Saab 9-7x Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 2006 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Chevrolet Avalanche 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 2500 Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 1851 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1981UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 SSR Rear Shaft Rear Joint 101 (2) 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 1852 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1982UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Trailblazer EXT Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Ram 1500 Rear Shaft Rear Joint 102 (3) RWD; Laramie 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; Laramie 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; SLT 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; SLT 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; ST 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; ST 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; Sport 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; Sport 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) SRT-10 Hardware 0.75 Inch Bolt Length 331-10 1 Ford Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 1853 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1983UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2006 Position Application Attributes Application Notes Part NumberQty Ford F-550 Super Duty continued Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD Inside Lock Rings 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 1854 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1984UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2006 Position Application Attributes Application Notes Part NumberQty GMC Sierra 2500 HD continued Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 i-280 Rear Shaft Rear Joint 101 (2) 530-10 1 Rear Shaft Rear Joint 102 (3) 530-10 1 i-350 Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Jeep TJ Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 225 (3) 65th Anniversary Edition1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Unlimited 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X 65 Aniversario 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 1855 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1985UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2006 Position Application Attributes Application Notes Part NumberQty Mazda Tribute Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Mercury Mariner Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Saab 9-7x Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 2005 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 2500 Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 1856 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1986UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 continued Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 SSR Rear Shaft Rear Joint 101 (2) 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 1857 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1987UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Ram 1500 Rear Shaft Rear Joint 101 (2) RWD; Laramie 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; Laramie 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; SLT 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; SLT 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD; ST 2 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; ST 3 Joint Driveshaft; 1.063" Bearing Cap Diameter; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) SRT-10 Hardware 0.75 Inch Bolt Length 331-10 1 Ford Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up; 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-350 Super Duty Rear Shaft Center Joint 106 (7) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Front Joint 106 (6,7) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 Rear Shaft Front Joint 225 (6) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 1858 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1988UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2005 Position Application Attributes Application Notes Part NumberQty GMC Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 1859 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1989UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2005 Position Application Attributes Application Notes Part NumberQty GMC Yukon continued Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep TJ Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Unlimited 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Unlimited Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 4WD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Tribute Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Mercury Mariner Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 223 (3) AWD 1/4-28 Bolts 437-10 1 Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Saab 9-7x Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 2004 Position Application Attributes Application Notes Part NumberQty Buick Rainier Front Shaft Front Joint 109 (1) AWD 5/16-24 Bolts 360-10 1 1860 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1990UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2004 Position Application Attributes Application Notes Part NumberQty Buick Rainier continued Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 2500 Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Colorado Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 SSR Rear Shaft Rear Joint 101 (2) 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 1861 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1991UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Ram 1500 Rear Shaft Rear Joint 101 (2) RWD; ST 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD; ST 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) SRT-10 Hardware 0.75 Inch Bolt Length 331-10 1 Ford Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 1862 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1992UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2004 Position Application Attributes Application Notes Part NumberQty Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up; 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1863 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1993UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2004 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 1864 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1994UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2004 Position Application Attributes Application Notes Part NumberQty Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 TJ Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sahara 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sahara 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Unlimited 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Tribute Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Oldsmobile Bravada Rear Shaft Rear Joint 101 (2) RWD 530-10 1 2003 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Escalade ESV Front Shaft Front Joint 109 (1) AWD 530-10 1 Escalade EXT Front Shaft Front Joint 109 (1) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 1865 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1995UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Express 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 SSR Rear Shaft Rear Joint 101 (2) 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft 530-10 1 1866 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1996UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 continued Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford E-550 Super Duty Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up; 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1867 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1997UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2003 Position Application Attributes Application Notes Part NumberQty Ford F-350 Super Duty continued Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Savana 1500 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1868 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1998UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2003 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Isuzu Ascender Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) 4.0L; AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 Liberty Rear Shaft Rear Joint 109 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 TJ Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 1869 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 1999UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2003 Position Application Attributes Application Notes Part NumberQty Jeep TJ continued Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sahara 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 225 (3) Rubicon 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) SE 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sahara 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) Sport 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) X AT 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Rubicon 1/4-28 Bolts 437-10 1 Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Tribute Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Oldsmobile Bravada Rear Shaft Rear Joint 101 (2) RWD 530-10 1 2002 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Avalanche 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Avalanche 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 1870 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2000UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 G30 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings; 1.063" & 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings; 1.063" & 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings; 1.063" & 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 1871 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2001UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) RWD 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Trailblazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Ram 2500 Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up; 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1872 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2002UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2002 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Envoy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Front Shaft Front Joint 112 (1) AWD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) AWD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 1873 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2003UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2002 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 HD continued Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) 4.0L; AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case; 1/4-28 Bolts 437-10 1 Liberty Rear Shaft Rear Joint 109 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 TJ Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wrangler Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 1874 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2004UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2002 Position Application Attributes Application Notes Part NumberQty Mazda B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Tribute Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Oldsmobile Bravada Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 G30 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 1875 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2005UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) RWD 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 316-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 316-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 316-10 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 1876 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2006UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Ram 3500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Escape Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 1877 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2007UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2001 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Sierra 1500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 HD Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 3500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 1878 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2008UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2001 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 TJ Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wrangler Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Tribute Rear Shaft Rear Joint 223 (3) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Oldsmobile Bravada Front Shaft Front Joint 5/16-24 Bolts 360-10 1 Pontiac Firebird Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 2000 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 1879 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2009UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1880 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2010UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Suburban 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Suburban 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft All Joints 109 (3,4) 4WD 316-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 316-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 316-10 3 Durango Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 Ram 2500 Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Ram 3500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 F-250 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1881 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2011UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2000 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC C2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 1882 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2012UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2000 Position Application Attributes Application Notes Part NumberQty GMC Sierra 1500 continued Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 1500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Yukon XL 2500 Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Isuzu Hombre Rear Shaft Rear Joint 101 (2) 530-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 Rear Shaft Rear Joint 102 (3) 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 TJ Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wrangler Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 1883 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2013UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 2000 Position Application Attributes Application Notes Part NumberQty Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Oldsmobile Bravada Front Shaft Front Joint 5/16-24 Bolts 360-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 1999 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 1884 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2014UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Front Shaft Front Joint 112 (1) 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Silverado 1500 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Front Joint 112 (3) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Front Joint 112 (3) 4WD Inside Lock Rings 530-10 1 Rear Shaft Front Joint 112 (3) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1885 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2015UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Silverado 2500 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge Dakota Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Durango Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 Ram 2500 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Ram 3500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Econoline Super Duty Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-250 Super Duty Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Super Duty Rear Shaft All Joints 106 (6,7,8) 4WD 1 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 2 Piece Rear Driveshaft; Hardware 0.75 Inch Bolt Length331-10 3 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1886 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2016UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1999 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 X 2 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 4 X 2 3 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 225 (8) 4 X 4 351-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft 351-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 351-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 109 (1) 5.0L; 530-10 1 Front Shaft Front Joint 109 (1) 5.7L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 1887 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2017UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1999 Position Application Attributes Application Notes Part NumberQty GMC K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 1500 Front Shaft Front Joint 112 (1) 4WD Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Inside & Outside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside & Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Sierra 2500 Front Shaft Front Joint 112 (1) 4WD 530-10 1 Rear Shaft Rear Joint 112 (5) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) RWD Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Isuzu Hombre Rear Shaft Rear Joint 101 (2) 530-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 Rear Shaft Rear Joint 102 (3) 530-10 1 1888 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2018UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1999 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 TJ Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wrangler Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 1889 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2019UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Rear Shaft Rear Joint 101 (2) 318-10 1 1890 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2020UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1998 Position Application Attributes Application Notes Part NumberQty Dodge B3500 Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Durango Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 Ram 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Ram 3500 Rear Shaft Rear Joint 102 (3) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Econoline Super Duty Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1891 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2021UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1998 Position Application Attributes Application Notes Part NumberQty GMC C3500HD continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Sonoma Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Isuzu Hombre Rear Shaft Rear Joint 101 (2) 530-10 1 Rear Shaft Rear Joint 102 (3) 530-10 1 1892 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2022UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1998 Position Application Attributes Application Notes Part NumberQty Isuzu Hombre continued Rear Shaft Rear Joint 109 (4) 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 Mazda B3000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 1893 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2023UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Express 1500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 Express 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 1894 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2024UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1997 Position Application Attributes Application Notes Part NumberQty Dodge B3500 Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 Ram 2500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford Econoline Super Duty Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Explorer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 F-100 Ranger Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 1895 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2025UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1997 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1896 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2026UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1997 Position Application Attributes Application Notes Part NumberQty GMC Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Honda Passport Rear Shaft Rear Joint 112 (5) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Isuzu Hombre Rear Shaft Rear Joint 109 (4) 530-10 1 Rear Shaft Rear Joint 101 (2) 530-10 1 Rear Shaft Rear Joint 102 (3) 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 Mazda B2300 Rear Shaft Rear Joint 101 (2) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) 1/4-28 Bolts 437-10 1 B3000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Mercury Mountaineer Front Shaft Front Joint 109 (1) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 109 (1) AWD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 1897 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2027UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1996 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C35 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Express 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Express 3500 Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 G30 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 1898 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2028UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Front Joint 109 (3) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Silverado Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B3500 Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 1899 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2029UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 316-10 2 Ram 3500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Van Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Ford E-350 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Econoline Super Duty Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-100 Ranger Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 1900 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2030UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1996 Position Application Attributes Application Notes Part NumberQty GMC C1500 Suburban continued Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Savana 2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Savana 3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1901 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2031UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1996 Position Application Attributes Application Notes Part NumberQty GMC Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Honda Passport Rear Shaft Rear Joint 112 (5) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Isuzu Hombre Rear Shaft Rear Joint 101 (2) 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) AWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) AWD 1/4-28 Bolts 437-10 1 Mazda B2300 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 B3000 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1902 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2032UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1995 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C35 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 1903 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2033UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Front Joint 109 (3) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Silverado Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Tahoe Front Shaft Front Joint 109 (1) 4WD; DIESEL 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 1904 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2034UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1995 Position Application Attributes Application Notes Part NumberQty Dodge B3500 Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 316-10 2 Ram 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ford E-350 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1905 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2035UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1995 Position Application Attributes Application Notes Part NumberQty GMC C3500 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) AWD Standard Suspension; 1.125" Bearing Cap Diameter 530-10 1 Rear Shaft Rear Joint 109 (4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Sonoma Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 2 Joint Driveshaft 530-10 1 1906 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2036UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1995 Position Application Attributes Application Notes Part NumberQty GMC Sonoma continued Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD; DIESEL 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Honda Passport Rear Shaft Rear Joint 112 (5) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Mazda B2300 Front Shaft Front Joint 233 (3) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 B3000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1994 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 1907 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2037UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 4WD; DIESEL 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 102 (3) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K1500 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1908 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2038UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B250 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 316-10 2 B350 Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Ram 2500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ram 3500 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ford E-350 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1909 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2039UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1994 Position Application Attributes Application Notes Part NumberQty Ford F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F59 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1910 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2040UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1994 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 K1500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Sonoma Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD; DIESEL 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Honda Passport Rear Shaft Rear Joint 112 (5) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 1911 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2041UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1994 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Mazda B2300 Rear Shaft Rear Joint 102 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) 1/4-28 Bolts 437-10 1 B3000 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 B4000 Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 1/4-28 Bolts 437-10 1 Navajo Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1993 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1912 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2042UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Aluminum Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 1913 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2043UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 Ford E-350 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1914 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2044UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1993 Position Application Attributes Application Notes Part NumberQty Ford F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F59 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1915 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2045UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1993 Position Application Attributes Application Notes Part NumberQty GMC G3500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 K1500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Sonoma Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Typhoon Rear Shaft Rear Joint 109 (4) 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 1916 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2046UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1993 Position Application Attributes Application Notes Part NumberQty Jeep Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Mazda Navajo Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Aluminum Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Aluminum Driveshaft 530-10 1 1992 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 1917 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2047UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 109 (1) 6.5L; 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 1918 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2048UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1992 Position Application Attributes Application Notes Part NumberQty Dodge D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 Ford Explorer Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F59 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 1919 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2049UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1992 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Suburban Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Suburban Rear Shaft Rear Joint 101 (2) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 530-10 1 K1500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 109 (4) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 112 (1) 6.5L; 530-10 1 1920 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2050UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1992 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Suburban Front Shaft Front Joint 109 (1) 530-10 1 Rear Shaft Rear Joint 109 (4) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Sonoma Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Typhoon Rear Shaft Rear Joint 109 (4) 530-10 1 Yukon Front Shaft Front Joint 109 (1) 4WD 530-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 1991 Position Application Attributes Application Notes Part NumberQty Buick Commercial Chassis Rear Shaft Rear Joint 101 (2) 530-10 1 Roadmaster Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 1921 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2051UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 1922 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2052UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 continued Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 102 (1,3) Inside Lock Rings 530-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 V1500 Suburban Front Shaft Center Joint 225 (4) 2 Joint Driveshaft 530-10 1 Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 225 (3) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 V3500 Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 1923 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2053UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet V3500 continued Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 Ford Explorer Front Shaft Front Joint 205 (4) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 1924 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2054UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty Ford F59 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500HD Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 1925 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2055UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) Hardware 1.50 Inch Bolt Length; Incl. 2 Inside and 2 Outside Lock Rings 492-10 1 K2500 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 102 (1,3) Inside Lock Rings 530-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Jimmy Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Sonoma Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Syclone Rear Shaft Rear Joint 109 (4) 530-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 1926 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2056UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1991 Position Application Attributes Application Notes Part NumberQty Jeep Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Mazda Navajo Rear Shaft Rear Joint 205 (9) 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 1990 Position Application Attributes Application Notes Part NumberQty Buick LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 101 (2) 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 1927 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2057UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1928 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2058UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet R3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 V1500 Suburban Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Front Shaft Center Joint 225 (4) 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings 530-10 1 V3500 Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 1929 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2059UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1990 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 Ford F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F59 Rear Shaft Rear Joint 129 (4) 4 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 205 (9) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 233 (7) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 101 (2) RWD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1930 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2060UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1990 Position Application Attributes Application Notes Part NumberQty GMC G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft 530-10 1 K2500 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Drum Rear Brakes 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Front Shaft Front Joint 109 (1) AWD 530-10 1 Rear Shaft Front Joint 109 (3) AWD 530-10 1 1931 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2061UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1990 Position Application Attributes Application Notes Part NumberQty GMC Safari continued Rear Shaft Rear Joint 109 (4) AWD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD Hardware 0.75 Inch Bolt Length 331-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 1989 Position Application Attributes Application Notes Part NumberQty Buick LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 101 (2) 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1932 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2062UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 1933 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2063UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 P20 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 V1500 Suburban Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Front Shaft Center Joint 225 (4) 2 Joint Driveshaft 530-10 1 Front Shaft Front Joint 225 (3) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 V3500 Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 1934 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2064UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty Dodge D100 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 Ford Aerostar Rear Shaft Rear Joint 101 (2) 530-10 1 Bronco II Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F53 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 F59 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 1935 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2065UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft 530-10 1 K2500 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 1936 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2066UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty GMC P3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings; 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 1937 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2067UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1989 Position Application Attributes Application Notes Part NumberQty Pontiac Safari Rear Shaft Rear Joint 101 (2) 530-10 1 1988 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Buick LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 101 (2) 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 2 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 1938 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2068UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K1500 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Inside Lock Rings; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Inside Lock Rings; 3 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; Outside Lock Rings; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; Outside Lock Rings; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P20 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 R10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R20 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S10 Front Shaft Front Joint 112 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 1939 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2069UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 continued Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD Press-On Slip Yoke Seal; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 V10 Suburban Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) Manual 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 V30 Front Shaft Center Joint 225 (4) 3 Joint Driveshaft 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 316-10 3 1940 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2070UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1988 Position Application Attributes Application Notes Part NumberQty Ford Aerostar Rear Shaft Rear Joint 101 (2) 530-10 1 Bronco II Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 112 (1) Manual 2 Joint Driveshaft 530-10 1 K2500 Front Shaft Front Joint 112 (1) Manual 3 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Front Shaft Front Joint 120 (3) Manual 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 530-10 1 Rear Shaft Rear Joint 120 (6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 1941 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2071UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1988 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft Rear Joint 130 (7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 112 (5) 3 Joint Rear Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 K3500 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Front Shaft Front Joint 112 (1) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Front Shaft Front Joint 112 (1) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal; 5/16-24 Bolts360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 1942 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2072UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1988 Position Application Attributes Application Notes Part NumberQty Jeep J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Oldsmobile Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Aluminum Driveshaft 530-10 1 Safari Rear Shaft Rear Joint 101 (2) 530-10 1 1987 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Buick Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Brougham Rear Shaft Rear Joint 101 (2) 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 1943 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2073UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P20 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 R10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 R20 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 V10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 V20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 V30 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Rear Shaft Rear Joint 112 (5) 2 Joint Front Driveshaft; Hardware 1.50 Inch Bolt Length492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 1944 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2074UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1987 Position Application Attributes Application Notes Part NumberQty Dodge B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dakota Front Shaft Front Joint 109 (1) 4WD 318-10 1 Rear Shaft Rear Joint 109 (4) 4WD 318-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 Ford Aerostar Rear Shaft Rear Joint 101 (2) 530-10 1 Bronco II Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 F-250 Rear Shaft Rear Joint 207 (9) 4WD Hardware 0.75 Inch Bolt Length; Incl. 2 Inside and 2 Outside Lock Rings 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length; Incl. 2 Inside and 2 Outside Lock Rings 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length; Incl. 2 Inside and 2 Outside Lock Rings 331-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Hardware 0.75 Inch Bolt Length 331-10 1 GMC Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1945 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2075UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1987 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 P2500 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R1500 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 R2500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 R2500 Suburban Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Front Shaft Front Joint 112 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 1946 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2076UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1987 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Wrangler Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Oldsmobile Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Safari Rear Shaft Rear Joint 101 (2) 530-10 1 1986 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Buick Electra Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 200 (4,5) 5 Joint Driveshaft 530-10 1 1947 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2077UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 C10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 1948 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2078UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P20 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 Ford Aerostar Rear Shaft Rear Joint 101 (2) 530-10 1 Bronco II Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 1949 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2079UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1986 Position Application Attributes Application Notes Part NumberQty GMC C1500 continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Front Shaft Front Joint 112 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 1950 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2080UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1986 Position Application Attributes Application Notes Part NumberQty GMC S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep CJ7 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Comanche Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 530-10 1 1985 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 1951 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2081UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1985 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 200 (4,5) 5 Joint Driveshaft 530-10 1 Chevrolet Astro Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 1952 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2082UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 0.75 Inch Bolt Length 331-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P20 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 1953 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2083UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1985 Position Application Attributes Application Notes Part NumberQty Dodge D250 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 1954 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2084UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1985 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Manual; 125.0in / 317.5mmin. Wheelbase Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 S15 Front Shaft Front Joint 112 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Safari Rear Shaft Rear Joint 101 (2) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep CJ7 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 4WD 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 4WD 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Scrambler Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 1955 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2085UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1985 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Supreme continued Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Delta 88 Rear Shaft Front Joint 101 (1) 530-10 1 Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 530-10 1 1984 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Buick Electra Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac DeVille Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1956 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2086UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Suburban continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 P20 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 1957 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2087UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 1958 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2088UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1984 Position Application Attributes Application Notes Part NumberQty GMC G2500 continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 S15 Front Shaft Front Joint 112 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep CJ7 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Grand Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 1959 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2089UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1984 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Firebird Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Parisienne Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1983 Position Application Attributes Application Notes Part NumberQty American Motors Concord Rear Shaft Rear Joint 101 (2) 1/4-28 Bolts 437-10 1 Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Spirit Rear Shaft Rear Joint 101 (2) 1/4-28 Bolts 437-10 1 Buick Electra Rear Shaft Rear Joint 101 (2) 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 1960 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2090UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1983 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1961 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2091UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Malibu Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 P20 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S10 Blazer Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Mirada Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 1962 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2092UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1983 Position Application Attributes Application Notes Part NumberQty GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 530-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 109 (4) 2 Joint Driveshaft 530-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 1963 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2093UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1983 Position Application Attributes Application Notes Part NumberQty GMC S15 Front Shaft Front Joint 112 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 112 (5) 4WD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 S15 Jimmy Front Shaft Front Joint 109 (1) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 109 (4) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 CJ7 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Scrambler Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Cruiser Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB150 Rear Shaft Rear Joint 101 (2) 318-10 1 PB250 Rear Shaft Rear Joint 101 (2) 318-10 1 1964 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2094UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1983 Position Application Attributes Application Notes Part NumberQty Plymouth PB350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Firebird Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Parisienne Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1982 Position Application Attributes Application Notes Part NumberQty American Motors Concord Rear Shaft Rear Joint 101 (2) 1/4-28 Bolts 437-10 1 Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) 1/4-28 Bolts 437-10 1 Spirit Rear Shaft Front Joint 101 (1) 318-10 1 Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Electra Rear Shaft Rear Joint 101 (2) 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Cadillac DeVille Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Fleetwood Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 530-10 1 1965 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2095UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 1966 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2096UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Malibu Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 P20 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 S10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 530-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Mirada Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 GMC C1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 1967 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2097UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1982 Position Application Attributes Application Notes Part NumberQty GMC Caballero continued Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 4WD 530-10 1 Rear Shaft Rear Joint 101 (2) RWD 530-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 225 (8) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 S15 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 530-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 CJ7 Front Shaft Front Joint 209 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 1968 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2098UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1982 Position Application Attributes Application Notes Part NumberQty Jeep J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Scrambler Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Cruiser Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB150 Rear Shaft Rear Joint 101 (2) 318-10 1 PB250 Rear Shaft Rear Joint 101 (2) 318-10 1 PB350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Firebird Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Parisienne Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1981 Position Application Attributes Application Notes Part NumberQty American Motors Concord Rear Shaft Rear Joint 101 (2) Inside & Outside Lock Rings 318-10 1 1969 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2099UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1981 Position Application Attributes Application Notes Part NumberQty American Motors Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Front Joint 109 (3) Outside Lock Rings; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) Inside & Outside Lock Rings 318-10 1 Spirit Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (2) 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 530-10 1 C10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C20 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 C20 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 1970 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2100UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P20 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) Automatic Hardware 1.50 Inch Bolt Length 492-10 1 Dodge B150 Rear Shaft Rear Joint 101 (2) 318-10 1 B250 Rear Shaft Rear Joint 101 (2) 318-10 1 B350 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D250 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Mirada Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 St. Regis Rear Shaft Rear Joint 101 (2) 318-10 1 1971 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2101UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1981 Position Application Attributes Application Notes Part NumberQty GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C2500 Suburban Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Rear Joint 225 (5) 530-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P2500 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) Automatic Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 CJ7 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 1972 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2102UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1981 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Scrambler Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Oldsmobile 98 Rear Shaft Rear Joint 218 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Front Joint 101 (1) Inside Lock Rings 530-10 1 Rear Shaft Front Joint 101 (1) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB150 Rear Shaft Rear Joint 101 (2) 318-10 1 PB250 Rear Shaft Rear Joint 101 (2) 318-10 1 PB350 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Trailduster Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1973 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2103UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1981 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1980 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft Rear Joint 101 (2) 318-10 1 Concord Rear Shaft Rear Joint 101 (2) Inside & Outside Lock Rings 318-10 1 Eagle Front Shaft Front Joint 109 (1) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 109 (4) Inside & Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 109 (4) Inside & Outside Lock Rings; 1/4-28 Bolts 437-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 Spirit Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (2) 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (2) 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C20 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 1974 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2104UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 P10 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 5/16-24 Bolts 360-10 1 P20 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) Automatic Hardware 1.50 Inch Bolt Length 492-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.126" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 1975 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2105UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1980 Position Application Attributes Application Notes Part NumberQty Dodge D100 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D100 Panel Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Mirada Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 St. Regis Rear Shaft Rear Joint 101 (2) 318-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G2500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 1976 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2106UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1980 Position Application Attributes Application Notes Part NumberQty GMC K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P1500 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 5/16-24 Bolts 360-10 1 P2500 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) Automatic Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 Jeep CJ5 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 CJ7 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft; 1/4-28 Bolts 437-10 1 Cherokee Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Rear Shaft Rear Joint 225 (8) Manual 1/4-28 Bolts 437-10 1 J10 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 J20 Rear Shaft Rear Joint 225 (8) 1/4-28 Bolts 437-10 1 Wagoneer Front Shaft Front Joint 225 (3) 1/4-28 Bolts 437-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 218 (3) Inside Lock Rings 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Front Joint 218 (1) 3 Joint Driveshaft 530-10 1 1977 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2107UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1980 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 continued Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Plymouth Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Trailduster Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Volare Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1979 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft Rear Joint 101 (2) 318-10 1 Concord Rear Shaft Rear Joint 101 (2) Inside & Outside Lock Rings 318-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 Spirit Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 1978 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2108UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1979 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Skylark Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 1979 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2109UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P10 Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P20 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.125" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Panel Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 1980 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2110UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1979 Position Application Attributes Application Notes Part NumberQty Dodge Magnum Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 St. Regis Rear Shaft Rear Joint 101 (2) 318-10 1 GMC C1500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C3500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Caballero Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G1500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G2500 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 G3500 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K1500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K2500 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K3500 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 P1500 Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P2500 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 P3500 Rear Shaft Rear Joint 102 (3) Hardware 0.75 Inch Bolt Length 331-10 1 1981 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2111UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1979 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Wagoneer Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Plymouth PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Trailduster Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Volare Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Phoenix Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 1982 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2112UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1978 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft Rear Joint 101 (2) 318-10 1 Concord Rear Shaft Rear Joint 101 (2) Inside & Outside Lock Rings 318-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 318-10 1 Matador Rear Shaft Rear Joint 101 (2) 318-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Riviera Rear Shaft Rear Joint 101 (2) 530-10 1 Skylark Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 Chevrolet C10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C20 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 1983 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2113UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G30 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.125" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 1984 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2114UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1978 Position Application Attributes Application Notes Part NumberQty Dodge Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Magnum Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 GMC C15 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C15 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C25 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 C35 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G15 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings; 5/16-24 Bolts 360-10 1 G35 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K25 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K35 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Wagoneer Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Calais Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) 530-10 1 1985 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2115UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1978 Position Application Attributes Application Notes Part NumberQty Oldsmobile Delta 88 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Plymouth Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Trailduster Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Volare Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Phoenix Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 1977 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 318-10 1 Hornet Rear Shaft Rear Joint 101 (2) 318-10 1 Matador Rear Shaft Rear Joint 101 (2) 318-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 1986 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2116UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1977 Position Application Attributes Application Notes Part NumberQty Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Riviera Rear Shaft Rear Joint 101 (2) 530-10 1 Skylark Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 Chevrolet C10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C30 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Impala Rear Shaft Rear Joint 101 (2) 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K30 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 1987 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2117UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.125" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Panel Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D150 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Diplomat Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 Royal Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 GMC C15 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C15 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C35 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 1988 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2118UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1977 Position Application Attributes Application Notes Part NumberQty GMC G15 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K25 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 K35 Rear Shaft Rear Joint 225 (8) Hardware 1.50 Inch Bolt Length 492-10 1 Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Wagoneer Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Plymouth Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Trailduster Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Volare Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1989 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2119UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1977 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Phoenix Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 1976 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 318-10 1 Hornet Rear Shaft Rear Joint 101 (2) 318-10 1 Matador Rear Shaft Rear Joint 101 (2) 318-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 Buick Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Skylark Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 Chevrolet C10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C30 Rear Shaft Rear Joint 102 (3) 1.063" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 102 (3) 1.188" Bearing Cap Diameter; Hardware 1.50 Inch Bolt Length 492-10 1 1990 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2120UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft Rear Joint 101 (2) 530-10 1 Chevette Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 El Camino Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Laguna Rear Shaft Rear Joint 101 (2) 530-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 P10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.125" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D100 Panel Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 1991 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2121UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1976 Position Application Attributes Application Notes Part NumberQty Dodge D300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 Royal Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 GMC C15 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C15 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C35 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 G15 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K25 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Tiara Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Starfire Rear Shaft Rear Joint 101 (2) 530-10 1 1992 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2122UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1976 Position Application Attributes Application Notes Part NumberQty Plymouth Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Trailduster Front Shaft Front Joint 225 (3) 4WD 318-10 1 Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Volare Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Firebird Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1975 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 318-10 1 Hornet Rear Shaft Rear Joint 101 (2) 318-10 1 Matador Rear Shaft Rear Joint 101 (2) 318-10 1 Pacer Rear Shaft Rear Joint 101 (2) 318-10 1 1993 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2123UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1975 Position Application Attributes Application Notes Part NumberQty Buick Apollo Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Estate Wagon Rear Shaft Rear Joint 101 (2) 530-10 1 LeSabre Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Skylark Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; 5/16-24 Bolts 360-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 3 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 3 C10 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Caprice Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 G10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 K10 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K20 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Laguna Rear Shaft Rear Joint 101 (2) 530-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 1994 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2124UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 P20 Rear Shaft Rear Joint 102 (3) Hardware 1.50 Inch Bolt Length 492-10 1 Dodge B100 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B200 Rear Shaft Rear Joint 101 (2) 1.125" Bearing Cap Diameter 318-10 1 Rear Shaft Rear Joint 101 (2) 1.078" Bearing Cap Diameter 318-10 1 B300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 Ramcharger Rear Shaft Rear Joint 101 (2) RWD 318-10 1 Royal Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 GMC C15 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 C15 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Hardware 1.50 Inch Bolt Length 492-10 1 G15 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 1995 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2125UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1975 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Front Shaft Front Joint 225 (3) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 4WD 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K25 Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Wagoneer Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Salon Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Supreme Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 PB100 Rear Shaft Rear Joint 101 (2) 318-10 1 PB200 Rear Shaft Rear Joint 101 (2) 318-10 1 PB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Trailduster Front Shaft Front Joint 225 (3) 4WD 318-10 1 Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 218 (3) RWD 3 Joint Driveshaft 318-10 1 1996 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2126UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1975 Position Application Attributes Application Notes Part NumberQty Plymouth Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand LeMans Rear Shaft Rear Joint 101 (2) 318-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 Grandville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 1974 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Gremlin Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Buick Apollo Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 LeSabre Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Blazer Rear Shaft Rear Joint 101 (2) RWD; Automatic 5/16-24 Bolts 360-10 1 Caprice Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 G10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 1997 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2127UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Laguna Rear Shaft Rear Joint 101 (2) 530-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Chrysler New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge B100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B300 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Challenger Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 1998 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2128UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1974 Position Application Attributes Application Notes Part NumberQty Dodge Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 GMC G15/G1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Jimmy Rear Shaft Rear Joint 101 (2) RWD; Automatic 5/16-24 Bolts 360-10 1 K15/K1500 Pickup Rear Shaft Front Joint 225 (6) 5/16-24 Bolts 360-10 1 K15/K1500 Suburban Rear Shaft Front Joint 225 (6) 5/16-24 Bolts 360-10 1 Jeep Cherokee Rear Shaft Rear Joint 225 (8) Manual 318-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 1999 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2129UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1974 Position Application Attributes Application Notes Part NumberQty Plymouth Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Trailduster Front Shaft Front Joint 225 (3) 4WD 318-10 1 Rear Shaft Rear Joint 225 (8) 4WD 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 Grandville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1973 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Gremlin Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Buick Apollo Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Century Rear Shaft Rear Joint 101 (2) 530-10 1 Electra Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 LeSabre Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Regal Rear Shaft Rear Joint 101 (2) 530-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Blazer Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 Caprice Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 2000 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2130UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Laguna Rear Shaft Rear Joint 101 (2) 530-10 1 Malibu Rear Shaft Rear Joint 101 (2) 530-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 530-10 1 Nova Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 316-10 4 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge B100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B300 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 CB300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Challenger Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 2001 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2131UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1973 Position Application Attributes Application Notes Part NumberQty Dodge D200 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 GMC G15/G1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Jimmy Rear Shaft Rear Joint 101 (2) RWD 5/16-24 Bolts 360-10 1 K15/K1500 Pickup Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 K15/K1500 Suburban Rear Shaft Rear Joint 225 (8) 5/16-24 Bolts 360-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Omega Rear Shaft Rear Joint 101 (2) 5/16-24 Bolts 360-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 2002 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2132UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1973 Position Application Attributes Application Notes Part NumberQty Plymouth Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Grand Am Rear Shaft Rear Joint 101 (2) 530-10 1 Grand Prix Rear Shaft Rear Joint 101 (2) 530-10 1 Grandville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 LeMans Rear Shaft Rear Joint 101 (2) 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1972 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Gremlin Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Biscayne Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 2003 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2133UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet Kingswood Rear Shaft Rear Joint 218 (3) 530-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 316-10 4 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge B100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B300 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Challenger Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 P300 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 GMC G15/G1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 5/16-24 Bolts 360-10 1 2004 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2134UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1972 Position Application Attributes Application Notes Part NumberQty GMC G15/G1500 Van continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 5/16-24 Bolts 360-10 1 Oldsmobile 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 F85 Rear Shaft Rear Joint 101 (2) 530-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 Gran Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Grandville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1971 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 2005 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2135UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1971 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Caprice Rear Shaft Rear Joint 101 (2) 530-10 1 Impala Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Kingswood Rear Shaft Rear Joint 218 (3) 530-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 316-10 4 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge B100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 B300 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Challenger Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 2006 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2136UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1971 Position Application Attributes Application Notes Part NumberQty Dodge P200 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 P300 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) 530-10 1 98 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (1) 2 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 530-10 1 Rear Shaft Rear Joint 101 (2) 530-10 1 F85 Rear Shaft Rear Joint 101 (2) 530-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 318-10 1 Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 GTX Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 2007 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2137UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1971 Position Application Attributes Application Notes Part NumberQty Plymouth Scamp Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 Pontiac Bonneville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Catalina Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Grandville Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 Parisienne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 530-10 1 1970 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Gremlin Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 316-10 4 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge A100 Rear Shaft Rear Joint 101 (2) 318-10 1 A108 Van Rear Shaft Rear Joint 101 (2) 318-10 1 Challenger Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 2008 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2138UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1970 Position Application Attributes Application Notes Part NumberQty Dodge Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 P300 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) 530-10 1 Cutlass Rear Shaft Rear Joint 101 (2) 7.5L; 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) 530-10 1 F85 Rear Shaft Rear Joint 101 (2) 530-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) 7.5L; 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 318-10 1 Duster Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 GTX Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 2009 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2139UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1970 Position Application Attributes Application Notes Part NumberQty Plymouth Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 1969 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 316-10 2 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge A108 Van Rear Shaft Rear Joint 101 (2) Manual 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P300 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 P300 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 2010 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2140UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1969 Position Application Attributes Application Notes Part NumberQty Dodge W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) 7.5L; 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) 530-10 1 F85 Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 GTX Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 1968 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 316-10 2 New Yorker Rear Shaft Rear Joint 101 (2) 318-10 1 Newport Rear Shaft Rear Joint 101 (2) 318-10 1 Dodge A108 Van Rear Shaft Rear Joint 101 (2) Manual 318-10 1 Charger Rear Shaft Rear Joint 101 (2) 318-10 1 2011 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2141UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1968 Position Application Attributes Application Notes Part NumberQty Dodge Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D200 Pickup Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D300 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P100 Rear Shaft Rear Joint 101 (2) 318-10 1 P100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 P200 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) 7.5L; 530-10 1 Delmont 88 Rear Shaft Rear Joint 101 (2) 530-10 1 Delta 88 Rear Shaft Rear Joint 101 (2) 530-10 1 F85 Rear Shaft Rear Joint 101 (2) 530-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 318-10 1 Fury Rear Shaft Rear Joint 101 (2) 318-10 1 Fury I Rear Shaft Rear Joint 101 (2) 318-10 1 Fury II Rear Shaft Rear Joint 101 (2) 318-10 1 2012 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2142UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1968 Position Application Attributes Application Notes Part NumberQty Plymouth Fury III Rear Shaft Rear Joint 101 (2) 318-10 1 GTX Rear Shaft Rear Joint 101 (2) 318-10 1 Road Runner Rear Shaft Rear Joint 101 (2) 318-10 1 Satellite Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 1967 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft All Joints 101 (1,2) 5/16-24 Bolts 360-10 2 Rear Shaft All Joints 101 (1,2) 1/4-28 Bolts 437-10 2 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 316-10 2 Dodge A108 Van Rear Shaft Rear Joint 101 (2) Manual 318-10 1 Charger Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 Coronet Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 D100 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 P100 Van Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 P200 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 2013 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2143UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1967 Position Application Attributes Application Notes Part NumberQty Dodge Polara continued Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 F85 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 101 (2) 4.5L; 318-10 1 Rear Shaft Rear Joint 101 (2) 5.2L; 318-10 1 Rear Shaft Rear Joint 101 (2) 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Inside Lock Rings 316-10 1 Fury Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 101 (2) 5.2L; 318-10 1 Rear Shaft Rear Joint 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 7.2L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Inside Lock Rings 316-10 1 GTX Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 Satellite Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 101 (2) 4.5L; 318-10 1 Rear Shaft Rear Joint 101 (2) 5.2L; 318-10 1 Rear Shaft Rear Joint 101 (2) 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 2014 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2144UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1967 Position Application Attributes Application Notes Part NumberQty Plymouth Satellite continued Rear Shaft Rear Joint 101 (2) 7.2L; Inside Lock Rings 316-10 1 VIP Rear Shaft Rear Joint 101 (2) 318-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 1966 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial Rear Shaft All Joints 101 (1,2) 316-10 2 New Yorker Rear Shaft Front Joint 101 (1) 316-10 1 Dodge A100 Rear Shaft Rear Joint 101 (2) 318-10 1 Charger Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 Coronet Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 D100 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Dart Rear Shaft Rear Joint 101 (2) 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 P100 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 316-10 1 W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 2015 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2145UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1966 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 F85 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Barracuda Rear Shaft Rear Joint 101 (2) 318-10 1 Belvedere Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 101 (2) 4.5L; 318-10 1 Rear Shaft Rear Joint 101 (2) 5.2L; 318-10 1 Rear Shaft Rear Joint 101 (2) 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Inside Lock Rings 316-10 1 Fury Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 5.2L; 318-10 1 Rear Shaft Rear Joint 101 (2) 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 7.0L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 7.2L; Inside Lock Rings 316-10 1 Satellite Rear Shaft Rear Joint 101 (2) 3.7L; 318-10 1 Rear Shaft Rear Joint 101 (2) 4.5L; 318-10 1 Rear Shaft Rear Joint 101 (2) 5.2L; 318-10 1 Rear Shaft Rear Joint 101 (2) 6.3L; 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; Inside Lock Rings 316-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Outside Lock Rings 318-10 1 Rear Shaft Rear Joint 101 (2) 7.2L; Inside Lock Rings 316-10 1 Valiant Rear Shaft Rear Joint 101 (2) 318-10 1 1965 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial Rear Shaft All Joints 101 (1,2) 316-10 2 New Yorker Rear Shaft Front Joint 101 (1) 316-10 1 Dodge 880 Rear Shaft Rear Joint 101 (2) 318-10 1 2016 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2146UNIVERSAL JOINTS Precision Driveline U-Joint Strap Kits 1965 Position Application Attributes Application Notes Part NumberQty Dodge A100 Rear Shaft Rear Joint 101 (2) 318-10 1 Coronet Rear Shaft Rear Joint 101 (2) 318-10 1 D100 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 D200 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 D300 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Monaco Rear Shaft Rear Joint 101 (2) 318-10 1 P100 Rear Shaft Rear Joint 101 (2) 318-10 1 P200 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 318-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 318-10 1 Polara Rear Shaft Rear Joint 101 (2) 318-10 1 W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 316-10 2 Oldsmobile 442 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Cutlass Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 F85 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Vista Cruiser Rear Shaft Rear Joint 101 (2) Inside Lock Rings 530-10 1 Rear Shaft Rear Joint 101 (2) Outside Lock Rings; Hardware 1.50 Inch Bolt Length 492-10 1 Plymouth Fury Rear Shaft Rear Joint 101 (2) 318-10 1 2017 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2147UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2016 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 2015 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Ford E-350 Super Duty Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 330-10 1 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Mustang Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 1 Ram 2500 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 3500 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2014 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 2018 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2148UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2014 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 HD continued Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Ford E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Mustang Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 2 GMC Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 2500 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 2019 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2149UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2014 Position Application Attributes Application Notes Part NumberQty Ram 3500 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2013 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Ford E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 2020 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2150UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2013 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 330-10 1 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Mustang Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 2 GMC Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Ram 1500 Rear Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 2500 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 3500 Front Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Front Shaft All Joints 102 (1,2,3) 4WD 3 Joint Driveshaft 330-10 2 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2021 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2151UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2012 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Ford E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 112 (3,4,5) AWD 3.624" Outside Lock-Up 330-10 3 2022 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2152UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2012 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 Rear Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2011 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 2023 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2153UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2011 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 F-150 Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 2024 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2154UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2011 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 112 (3,4,5) AWD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 330-10 1 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints AWD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 330-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 330-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 2025 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2155UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2011 Position Application Attributes Application Notes Part NumberQty Ram 1500 continued Rear Shaft All Joints 101 (1,2) 4WD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 4500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 5500 Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2010 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 2026 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2156UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2010 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 330-10 2 Front Shaft All Joints 112 (1,2) AWD 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 2027 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2157UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2010 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Sierra Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 330-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 330-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 2009 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 2028 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2158UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2009 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Trailblazer Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 112 (1) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 2029 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2159UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2009 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 F-250 Front Shaft All Joints 112 (1,2) 4WD 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 F-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 2030 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2160UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2009 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Envoy Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 109 (3,4) AWD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Lincoln Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 330-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 2031 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2161UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2009 Position Application Attributes Application Notes Part NumberQty Mercury Mariner continued Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints RWD 3 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Saab 9-7x Rear Shaft Rear Joint 109 (4) 330-10 1 2008 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Escalade ESV Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 2032 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2162UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2008 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Tahoe Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Trailblazer Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 2033 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2163UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2008 Position Application Attributes Application Notes Part NumberQty Ford Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 330-10 2 Front Shaft All Joints 112 (1,2) AWD 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) AWD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 F-250 Front Shaft All Joints 112 (1,2) 4WD 330-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 F-350 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Envoy Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 2034 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2164UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2008 Position Application Attributes Application Notes Part NumberQty GMC Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Sierra 1500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Yukon Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 109 (3,4) AWD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Isuzu i-290 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft 329-10 2 i-370 Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Lincoln Mark LT Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Front Shaft All Joints 109 (1,2) AWD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 109 (3,4) AWD Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD Exc. Staked-In U-Joints 330-10 3 Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 2035 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2165UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2008 Position Application Attributes Application Notes Part NumberQty Mazda B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 330-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints RWD 3 Joint Driveshaft 329-10 2 Saab 9-7x Rear Shaft Rear Joint 109 (4) 330-10 1 2007 Position Application Attributes Application Notes Part NumberQty Cadillac Escalade Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Chevrolet Avalanche Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 2036 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2166UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2007 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 Classic Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Silverado 1500 HD Classic Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 1.375" Bearing Cap Diameter; 4.178" Lock-Up 358-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 1.375" Bearing Cap Diameter 358-10 1 Silverado 3500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 358-10 3 Rear Shaft Center and Rear Joint 102 (2,3) RWD 358-10 2 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Suburban 2500 Rear Shaft All Joints 109 (3,4) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 3 Trailblazer Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Ram 1500 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 112 (1) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Front Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) 330-10 2 2037 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2167UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2007 Position Application Attributes Application Notes Part NumberQty Ford E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 F-250 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Super Duty Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 2038 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2168UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2007 Position Application Attributes Application Notes Part NumberQty Ford Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 Classic Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 HD Classic Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Yukon XL 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 109 (3,4) AWD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 3 Isuzu i-290 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft 329-10 2 i-370 Rear Shaft Front Joint 109 (3) 4WD 329-10 1 2039 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2169UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2007 Position Application Attributes Application Notes Part NumberQty Isuzu i-370 continued Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 Lincoln Mark LT Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Navigator Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 330-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 Rear Shaft Front Joint 101 (1) RWD 329-10 1 Avalanche 2500 Rear Shaft All Joints 109 (3,4) 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 2040 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2170UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2006 Position Application Attributes Application Notes Part NumberQty Chevrolet Colorado continued Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 HD Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Suburban 1500 Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 109 (3,4) AWD Outside Lock Rings 330-10 2 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Trailblazer Rear Shaft All Joints 109 (3,4) 4WD Outside Lock Rings 330-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Laramie 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD; SLT 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD; ST 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD; Sport 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; Sport 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; TRX4 1.063" Bearing Cap Diameter; 2 Joint Front Driveshaft 329-10 3 2041 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2171UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2006 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 225 (6,7,8) 4WD; TRX4 1.063" Bearing Cap Diameter; 3 Joint Front Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; SLT 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD; ST 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; ST 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; Sport 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; Sport 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) SRT-10 330-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Aluminum Driveshaft 330-10 2 Rear Shaft All Joints Steel Driveshaft 329-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 2042 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2172UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2006 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Super Duty Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 F-350 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 HD Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Isuzu i-280 Rear Shaft Front Joint 102 (1) 3 Joint Driveshaft 329-10 1 2043 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2173UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2006 Position Application Attributes Application Notes Part NumberQty Isuzu i-280 continued Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft 329-10 2 i-350 Rear Shaft Front Joint 109 (3) 329-10 1 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 TJ Front Shaft Front Joint 225 (3) SE 329-10 1 Front Shaft Front Joint 225 (3) Sport 329-10 1 Rear Shaft All Joints 225 (6,7,8) SE 329-10 3 Rear Shaft All Joints 225 (6,7,8) Sport 329-10 3 Lincoln Mark LT Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD Exc. Staked-In U-Joints 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints Aluminum Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) Steel Driveshaft 329-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 Mitsubishi Raider Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 2044 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2174UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2006 Position Application Attributes Application Notes Part NumberQty Mitsubishi Raider continued Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 2005 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 Rear Shaft Front Joint 101 (1) RWD 329-10 1 Avalanche 2500 Rear Shaft All Joints 109 (3,4) 330-10 2 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Front Shaft All Joints 112 (1,2) AWD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 HD Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 2045 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2175UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2005 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD; Laramie 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; SLT 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD; ST 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD; Laramie 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; Laramie 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; SLT 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; SLT 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; ST 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) SRT-10 330-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Aluminum Driveshaft 330-10 2 Rear Shaft All Joints Steel Driveshaft 329-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 2046 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2176UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2005 Position Application Attributes Application Notes Part NumberQty Ford Explorer Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Front Shaft Front Joint 109 (1) AWD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft Front Joint 106 (3) 4WD 1 Piece Rear Driveshaft 330-10 1 Front Shaft Front Joint 225 (3) 4WD 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 F-550 Super Duty Front Shaft Front Joint 225 (3) 4 X 4 330-10 1 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 2047 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2177UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2005 Position Application Attributes Application Notes Part NumberQty GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 HD Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Jeep Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 TJ Front Shaft Front Joint 225 (3) SE 329-10 1 Front Shaft Front Joint 225 (3) Sport 329-10 1 Rear Shaft All Joints 225 (6,7,8) SE 329-10 3 Rear Shaft All Joints 225 (6,7,8) Sport 329-10 3 Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD Exc. Staked-In U-Joints 330-10 3 Town Car Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 2048 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2178UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2005 Position Application Attributes Application Notes Part NumberQty Mazda B4000 continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints Aluminum Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) Steel Driveshaft 329-10 2 Mariner Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 2 Rear Shaft All Joints 223 (1,2,3) AWD 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Avalanche 1500 Rear Shaft Front Joint 101 (1) RWD 329-10 1 Avalanche 2500 Rear Shaft All Joints 109 (3,4) 330-10 2 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Colorado Rear Shaft Front Joint 109 (3) 4WD 329-10 1 Rear Shaft Front Joint 101 (1) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) RWD 3 Joint Driveshaft 329-10 2 Express 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Front Shaft All Joints 112 (1,2) AWD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 2049 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2179UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2004 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 2500 HD continued Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; ST 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; ST 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) SRT-10 330-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Aluminum Driveshaft 330-10 2 Rear Shaft All Joints Steel Driveshaft 329-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Club Wagon Rear Shaft All Joints 101 (1,2) 3.624" Outside Lock-Up 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 2050 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2180UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2004 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Front Shaft Front Joint 109 (1) AWD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Exc. Staked-In U-Joints 330-10 3 F-150 Heritage Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints RWD 1.188" Bearing Cap Diameter 330-10 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 3 F-350 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 2051 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2181UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2004 Position Application Attributes Application Notes Part NumberQty Ford Mustang Rear Shaft All Joints 101 (1,2) 330-10 2 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Canyon Front Shaft Front Joint 109 (1) 4WD 329-10 1 Savana 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Sierra 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case 329-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case 329-10 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 TJ Front Shaft Front Joint 225 (3) Sahara 329-10 1 Front Shaft Front Joint 225 (3) Sport 329-10 1 Rear Shaft All Joints 225 (6,7,8) Sahara 329-10 3 Rear Shaft All Joints 225 (6,7,8) Sport 329-10 3 2052 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2182UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2004 Position Application Attributes Application Notes Part NumberQty Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints Aluminum Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) Steel Driveshaft 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) AWD 329-10 1 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Avalanche 1500 Rear Shaft Front Joint 101 (1) RWD 329-10 1 Avalanche 2500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Express 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Front Shaft All Joints 112 (1,2) AWD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2053 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2183UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2003 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) AWD Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Durango Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 329-10 2 Viper Rear Shaft All Joints 230 (1,2) 330-10 2 2054 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2184UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2003 Position Application Attributes Application Notes Part NumberQty Ford Crown Victoria Rear Shaft All Joints 101 (1,2) Aluminum Driveshaft 330-10 2 Rear Shaft All Joints Steel Driveshaft 329-10 2 E-150 Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 330-10 2 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Front Shaft Front Joint 109 (1) AWD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints RWD 1.188" Bearing Cap Diameter 330-10 2 F-250 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 2055 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2185UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2003 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 3 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft Front Joint 109 (1) 4WD 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 109 (3,4) AWD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 2 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Sierra 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Sierra 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 2056 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2186UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2003 Position Application Attributes Application Notes Part NumberQty GMC Yukon XL 2500 continued Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 329-10 1 Front Shaft Front Joint 225 (3) 4.0L; AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case 329-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case 329-10 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 TJ Front Shaft Front Joint 225 (3) SE 329-10 1 Front Shaft Front Joint 225 (3) Sahara 329-10 1 Front Shaft Front Joint 225 (3) Sport 329-10 1 Rear Shaft All Joints 225 (6,7,8) SE 329-10 3 Rear Shaft All Joints 225 (6,7,8) Sahara 329-10 3 Rear Shaft All Joints 225 (6,7,8) Sport 329-10 3 Lincoln Aviator Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Rear Shaft All Joints 101 (1,2) 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints Aluminum Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) Steel Driveshaft 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 2057 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2187UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2002 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Avalanche 1500 Rear Shaft Front Joint 101 (1) RWD 329-10 1 Avalanche 2500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 G30 Rear Shaft All Joints 101 (1,2) 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Silverado 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 2058 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2188UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2002 Position Application Attributes Application Notes Part NumberQty Dodge Dakota continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Durango Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ram 1500 Front Shaft Front Joint 112 (1) 4WD 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 329-10 2 Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2189UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2002 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 330-10 2 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 3 Front Shaft Front Joint 225 (3) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Sport Trac Front Shaft Front Joint 109 (1) 4WD 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints RWD 1.188" Bearing Cap Diameter 330-10 2 F-250 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 3 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 2060 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2190UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2002 Position Application Attributes Application Notes Part NumberQty Ford F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Sierra 1500 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 112 (3,4,5) AWD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Sierra 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Sierra 2500 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Sierra 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) 6.0L; RWD 330-10 2 Jeep Grand Cherokee Front Shaft Front Joint 225 (3) 4.0L; 4WD 329-10 1 Front Shaft Front Joint 225 (3) 4.0L; AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4.0L; 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.0L; AWD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; 4WD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4.7L; AWD w/o Selec-Trac Transfer Case 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 2061 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2191UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2002 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft Rear Joint 225 (8) 4.7L; 4WD w/ Selec-Trac Transfer Case 329-10 1 Rear Shaft Rear Joint 225 (8) 4.7L; AWD w/ Selec-Trac Transfer Case 329-10 1 Liberty Rear Shaft All Joints 109 (3,4) 4WD 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Blackwood Rear Shaft All Joints 101 (1,2) 330-10 2 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 2062 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2192UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2001 Position Application Attributes Application Notes Part NumberQty Chevrolet Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 G30 Rear Shaft All Joints 101 (1,2) 330-10 2 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 330-10 1 Silverado 2500 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Silverado 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Silverado 3500 Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) RWD 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Suburban 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Durango Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ram 1500 Front Shaft All Joints 225 (3,4,5) 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 2063 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2193UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2001 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 101 (1,2) 330-10 2 Escape Rear Shaft All Joints 223 (1,2,3) 4WD 329-10 3 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 1.063" Bearing Cap Diameter 329-10 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2194UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2001 Position Application Attributes Application Notes Part NumberQty Ford Expedition continued Rear Shaft All Joints 101 (1,2) RWD 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 1.063" Bearing Cap Diameter 329-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Sport Trac Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints RWD 1.188" Bearing Cap Diameter 330-10 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 3 F-350 Super Duty Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 2065 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2195UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2001 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Sierra 1500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 330-10 3 Sierra 2500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Sierra 2500 HD Rear Shaft All Joints 112 (3,4,5) 4WD 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 1 Sierra 3500 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 6.0L; 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 2066 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2196UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2001 Position Application Attributes Application Notes Part NumberQty Lincoln Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 329-10 2 B2500 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C2500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Inside Lock Rings 329-10 1 2067 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2197UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2000 Position Application Attributes Application Notes Part NumberQty Chevrolet Silverado 1500 continued Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 2500 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Suburban 2500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Dodge Dakota Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Durango Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ram 1500 Front Shaft All Joints 225 (3,4,5) 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; 4.185" Outside Lock-Up 329-10 3 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 2068 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2198UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2000 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Excursion Front Shaft All Joints 225 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 3.624" Outside Lock-Up 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 109 (3,4) 4WD 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 1.063" Bearing Cap Diameter 329-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints RWD 1.188" Bearing Cap Diameter 330-10 2 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2199UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2000 Position Application Attributes Application Notes Part NumberQty Ford F-250 Super Duty continued Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 1.188" Bearing Cap Diameter 330-10 3 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C2500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 2070 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2200UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 2000 Position Application Attributes Application Notes Part NumberQty GMC Savana 3500 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Sierra 2500 Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Yukon XL 2500 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 2071 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2201UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1999 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro continued Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Silverado 1500 Front Shaft All Joints 112 (1,2) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 112 (3,4,5) 4WD Inside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Silverado 2500 Rear Shaft All Joints 112 (3,4,5) 4WD 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Dodge Durango Rear Shaft All Joints 101 (1,2) RWD 329-10 2 2072 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2202UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1999 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Super Duty Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2203UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1999 Position Application Attributes Application Notes Part NumberQty Ford Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Rear Shaft All Joints 106 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 F-250 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-350 Super Duty Front Shaft All Joints 225 (3,4,5) 4WD 2 Piece Rear Driveshaft 330-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 1 Piece Rear Driveshaft 330-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD 3.624" Outside Lock-Up; 1 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.624" Outside Lock-Up; 2 Piece Rear Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 F-450 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 F-550 Super Duty Front Shaft All Joints 225 (3,4,5) 4 X 4 330-10 3 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 2074 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2204UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1999 Position Application Attributes Application Notes Part NumberQty Ford Ranger Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Sierra 2500 Rear Shaft All Joints 112 (3,4,5) 4WD 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3.624" Outside Lock-Up 330-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 2075 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2205UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1999 Position Application Attributes Application Notes Part NumberQty Jeep Grand Cherokee continued Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2076 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2206UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1998 Position Application Attributes Application Notes Part NumberQty Chevrolet C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 2077 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2207UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1998 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft Front Joint 102 (1) RWD 330-10 1 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 F-250 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2078 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2208UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1998 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 2079 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2209UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1998 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Navigator Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 330-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2500 Rear Shaft All Joints 101 (1,2) 329-10 2 B3000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 2080 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2210UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1997 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 2081 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2211UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1997 Position Application Attributes Application Notes Part NumberQty Dodge Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft Front Joint 102 (1) RWD 330-10 1 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 E-250 Econoline Rear Shaft All Joints 101 (1,2) 330-10 2 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 330-10 2 Expedition Front Shaft All Joints 109 (1,2) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Explorer Rear Shaft All Joints 109 (3,4) 4WD 329-10 2 Rear Shaft All Joints 109 (3,4) AWD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 F-150 Front Shaft All Joints 112 (1,2) 4WD 329-10 2 Rear Shaft All Joints 112 (3,4,5) 4WD 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 112 (3,4,5) 4WD 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 2082 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2212UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1997 Position Application Attributes Application Notes Part NumberQty Ford F-250 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 109 (3,4) 4WD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 2083 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2213UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1997 Position Application Attributes Application Notes Part NumberQty GMC C3500HD Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 2 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 TJ Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 3 B3000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 2084 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2214UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1997 Position Application Attributes Application Notes Part NumberQty Mazda B3000 continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 329-10 3 Mercury Cougar Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 Mountaineer Front Shaft Front Joint 109 (1) 4WD 329-10 1 Front Shaft Front Joint 109 (1) AWD 329-10 1 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 Express 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Express 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Express 3500 Rear Shaft All Joints 101 (1,2) 330-10 2 2085 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2215UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1996 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Ram 2500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD Steel Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Steel Driveshaft; 1.063" Bearing Cap Diameter 329-10 3 Ram 3500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 2086 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2216UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1996 Position Application Attributes Application Notes Part NumberQty Dodge Ram 3500 Van continued Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 Rear Shaft Rear Joint 101 (2) 534-10 1 Explorer Rear Shaft All Joints 237 (4,5) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 237 (4,5) AWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.622" Outside Lock-Up 329-10 2 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2217UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1996 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 329-10 2 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 2088 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2218UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1996 Position Application Attributes Application Notes Part NumberQty GMC P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Savana 1500 Rear Shaft All Joints 101 (1,2) 330-10 2 Savana 2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Savana 3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 3 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Front Shaft Front Joint 225 (3) AWD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 225 (6,7,8) AWD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 B3000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 B4000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 329-10 3 Mercury Cougar Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 2089 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2219UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1995 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 5.7L; 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Dodge B1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 B2500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 2090 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2220UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1995 Position Application Attributes Application Notes Part NumberQty Dodge Ram 1500 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 1500 Van Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Crown Victoria Rear Shaft All Joints 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 Rear Shaft Rear Joint 101 (2) 534-10 1 Explorer Rear Shaft All Joints 237 (4,5) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 3.622" Outside Lock-Up 329-10 2 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2221UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1995 Position Application Attributes Application Notes Part NumberQty Ford F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 2092 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2222UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1995 Position Application Attributes Application Notes Part NumberQty GMC C3500HD Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 G3500 Rear Shaft All Joints 101 (1,2) 330-10 2 Jimmy Rear Shaft All Joints 109 (3,4) 4WD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 Rear Shaft All Joints 109 (3,4) AWD 1.188" Bearing Cap Diameter; High Performance Suspension 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) 329-10 2 Mazda B2300 Front Shaft Front Joint 233 (3) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 B3000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 B4000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 329-10 3 2093 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2223UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1995 Position Application Attributes Application Notes Part NumberQty Mercury Cougar Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) 329-10 2 1994 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 2094 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2224UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1994 Position Application Attributes Application Notes Part NumberQty Dodge B150 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 B250 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 2 Ram 1500 Front Shaft Rear and Center Joint 225 (4,5) 4WD 329-10 2 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Ram 2500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 329-10 2 Ram 3500 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Steel Driveshaft 330-10 3 Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Crown Victoria Rear Shaft All Joints 101 (1,2) Exc. Police & Trailer Towing Package 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Explorer Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door 329-10 3 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 2095 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2225UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1994 Position Application Attributes Application Notes Part NumberQty Ford F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 205 (7,8,9) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 2096 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2226UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1994 Position Application Attributes Application Notes Part NumberQty GMC C3500HD Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 G3500 Rear Shaft All Joints 101 (1,2) 330-10 2 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Sonoma Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mazda B2300 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 B3000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 B4000 Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Navajo Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 205 (7,8,9) 3 Joint Driveshaft 329-10 2 2097 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2227UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1994 Position Application Attributes Application Notes Part NumberQty Mercury Cougar Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Camaro Rear Shaft Front Joint 102 (1) 3 Joint Driveshaft; Aluminum Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft; Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 2098 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2228UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1993 Position Application Attributes Application Notes Part NumberQty Chevrolet S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Dodge Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Crown Victoria Rear Shaft All Joints 101 (1,2) Exc. Police & Trailer Towing Package 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Explorer Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door 329-10 3 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2229UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1993 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 205 (7,8,9) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 2100 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2230UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1993 Position Application Attributes Application Notes Part NumberQty GMC Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Sonoma Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Typhoon Front Shaft Rear Joint 109 (2) Press-On Slip Yoke Seal 329-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Grand Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 329-10 3 Lincoln Mark VIII Rear Shaft All Joints 101 (1,2) 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mazda Navajo Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 205 (7,8,9) 3 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Firebird Rear Shaft Front Joint 102 (1) 3 Joint Driveshaft; Aluminum Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft; Aluminum Driveshaft 329-10 1 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 2101 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2231UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1992 Position Application Attributes Application Notes Part NumberQty Chevrolet C1500 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 329-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Camaro Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 K1500 Suburban Front Shaft All Joints 109 (1,2) 329-10 2 Rear Shaft All Joints 109 (3,4) Inside Lock Rings 329-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 1 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Dodge Viper Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 330-10 2 W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Crown Victoria Rear Shaft All Joints 101 (1,2) Exc. Police & Trailer Towing Package 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 2102 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2232UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1992 Position Application Attributes Application Notes Part NumberQty Ford E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 Rear Shaft Rear Joint 101 (2) 534-10 1 Explorer Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door 329-10 3 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 205 (7,8,9) 4WD 3 Joint Driveshaft 329-10 3 2103 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2233UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1992 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 3 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 C3500HD Rear Shaft All Joints 129 (1,2,3,4) 3.624" Outside Lock-Up; 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.624" Outside Lock-Up 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 K2500 Rear Shaft All Joints 112 (3,4,5) 330-10 3 K2500 Suburban Rear Shaft All Joints 109 (3,4) 330-10 2 K3500 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Sonoma Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Typhoon Front Shaft Rear Joint 109 (2) Press-On Slip Yoke Seal 329-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 2104 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2234UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1992 Position Application Attributes Application Notes Part NumberQty Jeep Comanche continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mazda Navajo Front Shaft Front Joint 205 (4) 4WD 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 205 (7,8,9) 3 Joint Driveshaft 329-10 2 Mercury Cougar Rear Shaft All Joints 101 (1,2) XR-7 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Firebird Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 Camaro Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2235UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1991 Position Application Attributes Application Notes Part NumberQty Chevrolet K1500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 K3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 R1500 Suburban Rear Shaft Center Joint 102 (2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 V1500 Suburban Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 3.624" Outside Lock-Up; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3.624" Outside Lock-Up; 3 Joint Front Driveshaft 330-10 1 Dodge W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Country Squire Rear Shaft All Joints 101 (1,2) w/o Towing Package 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 2106 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2236UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1991 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Explorer Rear Shaft All Joints 205 (7,8,9) 4WD; Manual; 4-door 329-10 3 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 2107 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2237UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1991 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 205 (7,8,9) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 3 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 C3500HD Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 K1500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 K3500 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 R1500 Suburban Rear Shaft Center Joint 102 (2) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 3.624" Outside Lock-Up 330-10 1 S15 Jimmy Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 2108 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2238UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1991 Position Application Attributes Application Notes Part NumberQty GMC Sonoma Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 Syclone Front Shaft Rear Joint 109 (2) Press-On Slip Yoke Seal 329-10 1 V1500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 3 Joint Front Driveshaft 330-10 2 Rear Shaft All Joints 120 (5,6) 2 Joint Front Driveshaft 330-10 2 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3.624" Outside Lock-Up 330-10 1 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mazda Navajo Front Shaft Front Joint 205 (4) 329-10 1 Rear Shaft All Joints 205 (7,8,9) 329-10 3 Mercury Colony Park Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Cougar Rear Shaft All Joints 101 (1,2) XR-7 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Firebird Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 2109 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2239UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft All Joints 109 (3,4) 2 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 K1500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 K3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 P30 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 R1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 2110 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2240UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1990 Position Application Attributes Application Notes Part NumberQty Chevrolet V1500 Suburban Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Dodge W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Country Squire Rear Shaft All Joints 101 (1,2) w/o Towing Package 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 2111 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2241UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1990 Position Application Attributes Application Notes Part NumberQty Ford F-250 continued Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Front Shaft Front Joint 205 (4) 4WD 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 233 (3) 4WD 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 205 (7,8,9) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 233 (5,6,7) 4WD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft 329-10 2 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 2112 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2242UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1990 Position Application Attributes Application Notes Part NumberQty GMC Jimmy continued Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 K1500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 K3500 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) Drum Rear Brakes 3 Joint Driveshaft 330-10 1 R1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 S15 Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 S15 Jimmy Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Safari Rear Shaft Rear Joint 109 (4) AWD 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 330-10 1 V1500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 3 Joint Front Driveshaft 330-10 2 Rear Shaft All Joints 120 (5,6) 2 Joint Front Driveshaft 330-10 2 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 2113 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2243UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1990 Position Application Attributes Application Notes Part NumberQty Jeep Comanche continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Cougar Rear Shaft All Joints 101 (1,2) XR-7 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Firebird Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 101 (2) 330-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 Rear Shaft All Joints 109 (3,4) 2 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 2114 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2244UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1989 Position Application Attributes Application Notes Part NumberQty Chevrolet G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 K1500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 K3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 V1500 Suburban Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 2115 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2245UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1989 Position Application Attributes Application Notes Part NumberQty Dodge W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 W350 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Aerostar Rear Shaft Rear Joint 101 (2) 534-10 1 Bronco Front Shaft All Joints 221 (4,5) 4-Speed; Manual 534-10 2 Front Shaft All Joints 221 (4,5) Automatic 534-10 2 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual 534-10 3 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual 534-10 1 Rear Shaft Rear Joint 221 (8) Automatic 534-10 1 Bronco II Front Shaft All Joints 233 (3,4) 4WD 2 Joint Driveshaft 329-10 2 Front Shaft All Joints 205 (4,5,6) 4WD 3 Joint Driveshaft 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 329-10 2 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 329-10 2 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 2116 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2246UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1989 Position Application Attributes Application Notes Part NumberQty Ford F-350 continued Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 534-10 1 Rear Shaft Rear Joint 102 (3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 G1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 K1500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 K3500 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 2117 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2247UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1989 Position Application Attributes Application Notes Part NumberQty GMC P3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 S15 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 S15 Jimmy Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Safari Rear Shaft Rear Joint 101 (2) 330-10 1 V1500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 3 Joint Front Driveshaft 330-10 2 Rear Shaft All Joints 120 (5,6) 2 Joint Front Driveshaft 330-10 2 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 2118 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2248UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1989 Position Application Attributes Application Notes Part NumberQty Mercury Cougar Rear Shaft All Joints 101 (1,2) XR-7 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Firebird Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet Astro Rear Shaft Rear Joint 101 (2) 330-10 1 Blazer Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Rear Driveshaft 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Rear Driveshaft 330-10 2 C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 K1500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 K3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2249UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1988 Position Application Attributes Application Notes Part NumberQty Chevrolet K3500 continued Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R20 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R20 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R30 Rear Shaft All Joints 129 (1,2,3,4) 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 S10 Front Shaft Rear Joint 112 (2) 4WD Press-On Slip Yoke Seal 329-10 1 S10 Blazer Front Shaft Rear Joint 109 (2) 4WD Press-On Slip Yoke Seal 329-10 1 V10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 V20 Suburban Front Shaft All Joints 130 (5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 V30 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Dodge W250 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 3 Ford Aerostar Rear Shaft Rear Joint 101 (2) 534-10 1 Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Rear Shaft All Joints 221 (6,7,8) 5-Speed; Manual 534-10 3 Rear Shaft Rear Joint 221 (8) 4-Speed; Manual 534-10 1 Rear Shaft Rear Joint 221 (8) Automatic 534-10 1 2120 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2250UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1988 Position Application Attributes Application Notes Part NumberQty Ford Bronco II Front Shaft All Joints 205 (4,5,6) 4WD 3 Joint Driveshaft 329-10 2 Front Shaft All Joints 233 (3,4) 4WD 2 Joint Driveshaft 329-10 2 E-150 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft All Joints 101 (1,2) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft Front Joint 101 (1) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Rear Shaft Front Joint 102 (1) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 2121 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2251UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1988 Position Application Attributes Application Notes Part NumberQty Ford Ranger continued Rear Shaft Rear Joint 102 (3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 534-10 1 Rear Shaft Rear Joint 101 (2) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) Manual 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 K1500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 K2500 Front Shaft Front Joint 130 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 130 (6,7) 2 Joint Rear Driveshaft; 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 3 Joint Rear Driveshaft 330-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Rear Driveshaft; 2 Joint Front Driveshaft 330-10 1 K3500 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 R2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 2122 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2252UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1988 Position Application Attributes Application Notes Part NumberQty GMC R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 S15 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 S15 Jimmy Front Shaft Rear Joint 109 (2) 4WD 2 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Front Shaft Rear Joint 112 (2) 4WD 3 Joint Driveshaft; Press-On Slip Yoke Seal 329-10 1 Safari Rear Shaft Rear Joint 101 (2) 330-10 1 V1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 V2500 Suburban Front Shaft All Joints 130 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 120 (5,6) 2 Joint Front Driveshaft 330-10 2 Rear Shaft All Joints 130 (6,7) 3 Joint Front Driveshaft 330-10 2 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 Jeep Cherokee Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD Outside Lock Rings 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 2123 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2253UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1988 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Firebird Rear Shaft Front Joint 101 (1) Aluminum Driveshaft 329-10 1 1987 Position Application Attributes Application Notes Part NumberQty Buick Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Chevrolet Astro Rear Shaft Rear Joint 101 (2) 330-10 1 Blazer Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Rear Driveshaft; Outside Lock Rings 330-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R10 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 1 R10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 R20 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R20 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R30 Rear Shaft All Joints 129 (1,2,3,4) 4 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 V10 Front Shaft Front Joint 225 (3) 329-10 1 2124 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2254UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1987 Position Application Attributes Application Notes Part NumberQty Chevrolet V10 continued Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 V10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 V20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 V20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 V30 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 112 (3,4,5) 2 Joint Front Driveshaft 330-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 330-10 1 Ford Aerostar Rear Shaft Rear Joint 101 (2) 534-10 1 Bronco Front Shaft Front Joint 221 (4) 534-10 1 Rear Shaft Rear Joint 221 (8) 534-10 1 Bronco II Front Shaft All Joints 233 (3,4) 4WD 2 Joint Driveshaft 329-10 2 Front Shaft All Joints 205 (4,5,6) 4WD 3 Joint Driveshaft 329-10 2 E-150 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft Rear Joint 101 (2) 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 534-10 1 E-350 Econoline Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Shaft Rear Joint 207 (6) 4WD 329-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 2125 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2255UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1987 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Mustang Rear Shaft All Joints 101 (1,2) 5.0L; Manual 329-10 2 Ranger Rear Shaft All Joints 101 (1,2) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) Manual 329-10 2 GMC Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 R1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 2126 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2256UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1987 Position Application Attributes Application Notes Part NumberQty GMC R1500 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 R1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 R2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R2500 Suburban Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 R3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Safari Rear Shaft Rear Joint 101 (2) 330-10 1 V1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 V1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 V2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 V2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 V3500 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 Jeep Cherokee Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Colony Park Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 2127 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2257UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1987 Position Application Attributes Application Notes Part NumberQty Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Oldsmobile Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1986 Position Application Attributes Application Notes Part NumberQty Buick Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Chevrolet Astro Rear Shaft Rear Joint 101 (2) 330-10 1 C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 2128 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2258UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1986 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Ford Aerostar Rear Shaft Rear Joint 101 (2) 534-10 1 Bronco Front Shaft Front Joint 221 (4) 534-10 1 Rear Shaft Rear Joint 221 (8) 534-10 1 Bronco II Front Shaft All Joints 205 (4,5,6) 4WD 3 Joint Driveshaft 329-10 2 Front Shaft All Joints 233 (3,4) 4WD 2 Joint Driveshaft 329-10 2 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 2129 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2259UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1986 Position Application Attributes Application Notes Part NumberQty Ford E-350 Econoline continued Rear Shaft Front and Center Joints 102 (1,2) Automatic 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Shaft Rear Joint 207 (6) 4WD 329-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 F-350 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Ranger Rear Shaft All Joints 101 (1,2) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint not Using U-Bolts 329-10 2 Rear Shaft Front Joint 102 (1) RWD; Standard Cab Pickup3 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 Rear Shaft Front Joint 101 (1) RWD; Standard Cab Pickup2 Joint Driveshaft; U-Joint Using U-Bolts 329-10 1 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 2130 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2260UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1986 Position Application Attributes Application Notes Part NumberQty GMC C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Safari Rear Shaft Rear Joint 101 (2) 330-10 1 Jeep CJ7 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 Cherokee Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 2131 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2261UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1986 Position Application Attributes Application Notes Part NumberQty Jeep Cherokee continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Comanche Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Oldsmobile Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1985 Position Application Attributes Application Notes Part NumberQty Buick LeSabre Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Chevrolet Astro Rear Shaft Rear Joint 101 (2) 330-10 1 C10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 2132 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2262UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 2 P20 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 2133 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2263UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1985 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Rear Shaft Rear Joint 221 (8) 534-10 1 Bronco II Front Shaft All Joints 233 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft All Joints 205 (4,5,6) 3 Joint Driveshaft 329-10 2 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft Center Joint 102 (2) Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Shaft Rear Joint 207 (6) 4WD 329-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 2134 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2264UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1985 Position Application Attributes Application Notes Part NumberQty Ford F-350 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings; 2 Joint Front Driveshaft 330-10 3 Front Wheels All Joints 225 (1,2) 4WD Outside Lock Rings; 3 Joint Front Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Ranger Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K2500 Front Shaft Front Joint 225 (3) 329-10 1 2135 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2265UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1985 Position Application Attributes Application Notes Part NumberQty GMC K2500 continued Rear Shaft All Joints 225 (6,7,8) 330-10 3 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Manual; 125.0in / 317.5mmin. Wheelbase 330-10 3 Rear Shaft Front Joint 102 (1) Automatic; 133.0in / 337.8mmin. Wheelbase 330-10 1 Rear Shaft Front and Rear Joints 102 (1,3) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Safari Rear Shaft Rear Joint 101 (2) 330-10 1 Jeep CJ7 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 Cherokee Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Scrambler Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 225 (6) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Front Joint 209 (5) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 329-10 1 Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 2136 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2266UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1985 Position Application Attributes Application Notes Part NumberQty Oldsmobile Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Salon Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1984 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 LeSabre Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cadillac DeVille Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 2 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Caprice Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2137 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2267UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1984 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Impala Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 P20 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Rear Shaft Rear Joint 221 (8) 534-10 1 Bronco II Front Shaft All Joints 221 (4,5) 329-10 2 E-150 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 2138 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2268UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1984 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Center Joint 102 (2) Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 E-350 Econoline Club Wagon Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Center Joint 102 (2) Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) Automatic 3 Joint Driveshaft 329-10 2 Rear Shaft Rear Joint 102 (3) Automatic 3 Joint Driveshaft 534-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Ranger Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 2139 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2269UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1984 Position Application Attributes Application Notes Part NumberQty GMC Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 109 (1) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 109 (3,4) 2 Joint Driveshaft 330-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Driveshaft 330-10 3 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 Jeep CJ7 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 Cherokee Rear Shaft All Joints 225 (6,7,8) 329-10 3 Grand Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 2140 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2270UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1984 Position Application Attributes Application Notes Part NumberQty Jeep J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Scrambler Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 225 (6) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Front Joint 209 (5) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 329-10 1 Wagoneer Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Oldsmobile Cutlass Calais Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 Bonneville Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Firebird Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Grand Prix Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Parisienne Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1983 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 LeSabre Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 2141 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2271UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1983 Position Application Attributes Application Notes Part NumberQty Cadillac DeVille Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 2 Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Caprice Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Impala Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K20 Front Shaft Front Joint 225 (3) 329-10 1 2142 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2272UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1983 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 continued Rear Shaft All Joints 225 (6,7,8) 330-10 3 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 2 Malibu Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 P20 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Rear Shaft Rear Joint 221 (8) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-150 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 F-100 Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 2143 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2273UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1983 Position Application Attributes Application Notes Part NumberQty Ford F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Ranger Rear Shaft All Joints 101 (1,2) RWD 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2144 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2274UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1983 Position Application Attributes Application Notes Part NumberQty GMC G2500 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 Jeep CJ5 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 CJ7 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 Cherokee Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Scrambler Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 2145 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2275UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1983 Position Application Attributes Application Notes Part NumberQty Jeep Scrambler continued Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 209 (5) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Front Joint 225 (6) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 329-10 1 Wagoneer Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Mark VI Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Oldsmobile Cutlass Calais Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 Bonneville Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Firebird Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Grand Prix Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Parisienne Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1982 Position Application Attributes Application Notes Part NumberQty Buick Electra Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 LeSabre Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Regal Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cadillac DeVille Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 2 2146 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2276UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Camaro Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Caprice Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Impala Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 2147 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2277UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1982 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban continued Rear Shaft All Joints 225 (6,7,8) 330-10 3 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 2 Malibu Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Monte Carlo Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 P20 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Ford Bronco Front Shaft All Joints 221 (4,5) 534-10 2 Front Shaft Front Joint 221 (4) U-Joint Using U-Bolts 534-10 1 Rear Shaft Rear Joint 221 (8) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 F-100 Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 F-150 Front Shaft Front Joint 207 (4) 4WD 534-10 1 2148 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2278UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1982 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 F-350 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft All Joints 207 (7,8,9) 4WD 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 207 (9) 4WD Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 GMC C1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 2149 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2279UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1982 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Driveshaft 330-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 330-10 2 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) Outside Lock Rings 330-10 1 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 330-10 3 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 330-10 2 P3500 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 Jeep CJ5 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 CJ7 Front Shaft All Joints 209 (3,4) 329-10 2 Rear Shaft All Joints 209 (5,6,7) 329-10 3 Cherokee Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 2150 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2280UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1982 Position Application Attributes Application Notes Part NumberQty Jeep J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Scrambler Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 225 (6) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Front Joint 209 (5) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 329-10 1 Wagoneer Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Mark VI Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Oldsmobile Cutlass Calais Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Cruiser Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 Bonneville Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Firebird Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Grand Prix Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Parisienne Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 2151 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2281UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings 330-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Manual 330-10 4 Rear Shaft All Joints 230 (1,2) Manual 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2282UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1981 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 P20 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual 330-10 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic 330-10 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Ford Bronco Front Shaft Front Joint 221 (4) To Serial # GJ0000 534-10 1 Front Shaft Rear Joint 221 (5) From Serial #GJ0001 534-10 1 Rear Shaft Rear Joint 221 (8) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 2153 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2283UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1981 Position Application Attributes Application Notes Part NumberQty Ford F-100 Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534-10 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Outside Lock Rings 329-10 2 Front Shaft Front Joint 207 (4) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Inside Lock Rings 534-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 330-10 3 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 2154 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2284UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1981 Position Application Attributes Application Notes Part NumberQty GMC G1500 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Jimmy Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual 330-10 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic 330-10 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 Jeep CJ5 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 329-10 3 CJ7 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 2 2155 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2285UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1981 Position Application Attributes Application Notes Part NumberQty Jeep CJ7 continued Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Rear Shaft All Joints 209 (5,6,7) 2 Joint Front Driveshaft 329-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 329-10 3 Cherokee Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Scrambler Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 209 (5) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Front Joint 225 (6) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 3.220" Outside Lock-Up; 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3.220" Outside Lock-Up; 3 Joint Front Driveshaft 329-10 1 Wagoneer Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Lincoln Mark VI Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Town Car Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Pontiac Acadian Rear Shaft Rear Joint 101 (2) 329-10 1 T1000 Rear Shaft Rear Joint 101 (2) 329-10 1 1980 Position Application Attributes Application Notes Part NumberQty Buick Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 2156 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2286UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 Suburban continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C20 Suburban Rear Shaft All Joints 101 (1,2) 330-10 2 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) Manual 330-10 4 Rear Shaft All Joints 101 (1,2) Manual 329-10 2 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 2157 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2287UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1980 Position Application Attributes Application Notes Part NumberQty Chevrolet Monza Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 329-10 2 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 330-10 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual 330-10 2 Rear Shaft Front and Center Joints 102 (1,2) Automatic 330-10 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Ford Bronco Front Shaft Front Joint 221 (4) To Serial # GJ0000 534-10 1 Front Shaft Rear Joint 221 (5) From Serial #GJ0001 534-10 1 Rear Shaft Rear Joint 221 (8) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 2158 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2288UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1980 Position Application Attributes Application Notes Part NumberQty Ford F-100 Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534-10 1 F-150 Front Shaft All Joints 207 (4,6) 4WD Outside Lock Rings 329-10 2 Front Shaft Front Joint 207 (4) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft All Joints 207 (7,8,9) 4WD Outside Lock Rings 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 207 (9) 4WD Inside Lock Rings 534-10 1 Rear Shaft Rear Joint 207 (9) 4WD Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 534-10 1 F-250 Front Shaft Front Joint 207 (4) 4WD 534-10 1 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 F-350 Front Wheels All Joints 207 (1,2,3) 4WD Outside Lock Rings 330-10 3 Rear Shaft Rear Joint 207 (9) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 534-10 1 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 330-10 3 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 2159 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2289UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1980 Position Application Attributes Application Notes Part NumberQty GMC G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Jimmy Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft 329-10 2 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P1500 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) Automatic; THM350 329-10 2 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 330-10 1 Rear Shaft Front Joint 101 (1) Automatic; THM400 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 329-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Manual 330-10 2 2160 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2290UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1980 Position Application Attributes Application Notes Part NumberQty GMC P2500 continued Rear Shaft Front and Center Joints 102 (1,2) Automatic 330-10 2 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 International Scout II Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Jeep CJ7 Front Shaft All Joints 209 (3,4) 2 Joint Driveshaft 329-10 2 Front Shaft All Joints 225 (3,4,5) 3 Joint Driveshaft 329-10 2 Rear Shaft All Joints 209 (5,6,7) 2 Joint Front Driveshaft 329-10 2 Rear Shaft All Joints 225 (6,7,8) 3 Joint Front Driveshaft 329-10 3 Cherokee Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) Automatic 329-10 3 J10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 J20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 Wagoneer Front Shaft All Joints 225 (3,4,5) 329-10 3 Rear Shaft All Joints 225 (6,7,8) Automatic 329-10 3 Lincoln Continental Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mark VI Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Mercury Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 Pontiac Sunbird Rear Shaft Rear Joint 101 (2) 329-10 1 2161 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2291UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty Buick Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Skylark Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet C10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 330-10 3 C30 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 2162 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2292UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Monza Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Ford Bronco Front Shaft Front Joint 106 (3) 534-10 1 Rear Shaft Rear Joint 106 (8) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 E-250 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 2163 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2293UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-250 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 534-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 F-100 Rear Shaft Center Joint 102 (2) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Inside Lock Rings; Injected Plastic Retainers 534-10 1 F-150 Front Shaft All Joints 225 (3,4,5) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 329-10 3 Front Shaft All Joints 106 (3,4,5) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 106 (6,7,8) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 2 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 106 (8) 4WD 1 Piece Rear Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings 534-10 1 Rear Shaft Rear Joint 106 (8) 4WD Inside Lock Rings; 1 Piece Rear Driveshaft 534-10 1 Rear Shaft Rear Joint 225 (8) 4WD Inside Lock Rings; 2 Piece Rear Driveshaft 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Inside Lock Rings 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Inside Lock Rings 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; Incl. 2 Inside and 2 Outside Lock Rings534-10 1 F-250 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Front Wheels All Joints 225 (1,2) 4WD Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 F-350 Front Shaft Front Joint 225 (3) 4WD 534-10 1 Front Wheels All Joints 225 (1,2) 4WD Outside Lock Rings 330-10 1 Rear Shaft Rear Joint 225 (8) 4WD 534-10 1 Rear Shaft Rear Joint 102 (3) RWD 534-10 1 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 LTD II Rear Shaft Rear Joint 101 (2) 534-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 2164 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2294UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 C2500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 C3500 Rear Shaft All Joints 102 (1,2,3) 330-10 3 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G1500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G2500 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G3500 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 2165 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2295UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty GMC Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 K1500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K2500 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K2500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K3500 Front Shaft Front Joint 225 (3) 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 P1500 Rear Shaft All Joints 101 (1,2) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 1.063" Bearing Cap Diameter 329-10 1 P2500 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 P3500 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 330-10 1 International Scout II Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 CJ7 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 2166 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2296UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1979 Position Application Attributes Application Notes Part NumberQty Jeep J10 Rear Shaft Rear Joint 225 (8) 329-10 1 J20 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 Lincoln Mark V Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Mercury Bobcat Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Grand Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Marquis Rear Shaft All Joints 101 (1,2) w/ Towing Package 329-10 2 Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 Pontiac Sunbird Rear Shaft Rear Joint 101 (2) 329-10 1 1978 Position Application Attributes Application Notes Part NumberQty American Motors AMX Rear Shaft Rear Joint 101 (2) 329-10 1 Concord Rear Shaft Rear Joint 101 (2) Inside & Outside Lock Rings 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Matador Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Pacer Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Buick Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Skylark Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 2167 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2297UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet C10 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 330-10 3 C30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 G30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2298UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty Chevrolet K5 Blazer continued Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Monza Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Ford Bronco Front Shaft Front Joint 106 (3) 329-10 1 Rear Shaft Rear Joint 106 (8) 329-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 2169 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2299UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty Ford E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 F-150 Front Shaft All Joints 106 (3,4,5) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 F-250 Front Shaft Front Joint 212 (3) 4WD 2 Joint Driveshaft; Full Time Transfer Case 329-10 1 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft; Full Time Transfer Case 329-10 1 Front Wheels All Joints 225 (1,2) 4WD Outside Lock Rings; 3 Joint Front Driveshaft 330-10 1 Front Wheels All Joints 212 (1,2) 4WD Outside Lock Rings; 2 Joint Front Driveshaft 330-10 1 Intermediate Shaft Front and Rear Joints 212 (4,7) 4WD Part Time Transfer Case; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 212 (8,9) 4WD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 3.220" Outside Lock-Up 329-10 2 F-350 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 3 Fairmont Rear Shaft Rear Joint 101 (2) 534-10 1 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 LTD II Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang II Rear Shaft Rear Joint 101 (2) 534-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 2170 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2300UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty GMC C15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 C15 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C25 Rear Shaft All Joints 102 (1,2,3) 330-10 3 C25 Suburban Rear Shaft All Joints 102 (1,2,3) 330-10 3 C35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Caballero Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter; Outside Lock Rings 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Outside Lock Rings; 1.063" Bearing Cap Diameter 329-10 1 G25 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 G35 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 K15 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K15 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K25 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K35 Front Shaft Front Joint 225 (3) 329-10 1 P15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 2171 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2301UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty GMC P15 continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 International Scout II Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 CJ7 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 J10 Rear Shaft Rear Joint 225 (8) 329-10 1 J20 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 Lincoln Mark V Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Versailles Rear Shaft All Joints 218 (1,2,3) 329-10 3 Mercury Bobcat Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Grand Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 2172 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2302UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1978 Position Application Attributes Application Notes Part NumberQty Mercury Grand Marquis continued Rear Shaft Rear Joint 101 (2) 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 Pontiac Sunbird Rear Shaft Rear Joint 101 (2) 329-10 1 1977 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Matador Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Pacer Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Buick Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Skylark Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 2173 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2303UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 G10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 G20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 G30 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K30 Front Shaft Front Joint 225 (3) 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Monza Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 2174 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2304UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty Chevrolet P30 continued Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-350 Econoline Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 E-350 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 F-100 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 F-150 Front Shaft All Joints 225 (3,4,5) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Front Shaft All Joints 106 (3,4,5) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 3 2175 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2305UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 F-250 Front Shaft Front Joint 232 (3) 4WD Full Time Transfer Case 329-10 1 Front Wheels All Joints 225 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 1 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Part Time Transfer Case; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 232 (9,10,11) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 208 (7,8) 4WD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 3 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 LTD II Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang II Rear Shaft Rear Joint 101 (2) 534-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 2176 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2306UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty GMC C25 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 G15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G25 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 G35 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 K15 Rear Shaft Rear Joint 225 (8) 329-10 1 K15 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K25 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K35 Front Shaft Front Joint 225 (3) 329-10 1 P15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 2177 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2307UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty GMC Sprint Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 International Scout II Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 CJ7 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 J10 Rear Shaft Rear Joint 225 (8) 329-10 1 J20 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mark V Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Versailles Rear Shaft All Joints 218 (1,2,3) 329-10 3 Mercury Bobcat Rear Shaft Rear Joint 101 (2) 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Grand Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 2178 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2308UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1977 Position Application Attributes Application Notes Part NumberQty Mercury Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 Pontiac Astre Rear Shaft Rear Joint 101 (2) 329-10 1 Sunbird Rear Shaft Rear Joint 101 (2) 329-10 1 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1976 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Matador Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Pacer Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Buick Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Skylark Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet C10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2309UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 G30 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Monza Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P30 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 2180 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2310UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-250 Econoline Club Wagon Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Elite Rear Shaft Rear Joint 101 (2) 534-10 1 F-100 Rear Shaft All Joints 225 (6,7,8) 4WD 3.622" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 F-150 Front Shaft All Joints 106 (3,4,5) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 3 Front Shaft All Joints 225 (3,4,5) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Front Shaft Front Joint 106 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 4WD 3 Joint Driveshaft; 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 3.622" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 106 (6,7,8) 4WD 3.622" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 2181 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2311UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty Ford F-150 continued Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 F-250 Front Shaft Front Joint 232 (3) 4WD Full Time Transfer Case 329-10 1 Front Wheels All Joints 232 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 1 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Part Time Transfer Case; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 208 (7,8) 4WD 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 2 Rear Shaft All Joints 232 (9,10,11) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 3 Gran Torino Rear Shaft Rear Joint 101 (2) 534-10 1 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang II Rear Shaft Rear Joint 101 (2) 534-10 1 P-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 C25 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 2182 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2312UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty GMC C35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 G15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 G25 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 G35 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 K15 Rear Shaft Rear Joint 225 (8) 329-10 1 K15 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K25 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 P15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Sprint Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 International Scout II Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 2183 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2313UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty Jeep CJ5 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 CJ7 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 J10 Rear Shaft Rear Joint 225 (8) 329-10 1 J20 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mercury Bobcat Rear Shaft Rear Joint 101 (2) 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; 329-10 1 Rear Shaft Front Joint 101 (1) 6.6L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.6L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.5L; 534-10 1 Grand Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 2184 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2314UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1976 Position Application Attributes Application Notes Part NumberQty Pontiac Astre Rear Shaft Rear Joint 101 (2) 329-10 1 Sunbird Rear Shaft Rear Joint 101 (2) 329-10 1 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1975 Position Application Attributes Application Notes Part NumberQty American Motors Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 2.439" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Matador Rear Shaft Rear Joint 101 (2) Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 101 (2) 2.439" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Pacer Rear Shaft Rear Joint 101 (2) 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 2.439" Outside Lock-Up 329-10 1 Buick Apollo Rear Shaft All Joints 101 (1,2) 329-10 2 Skyhawk Rear Shaft Rear Joint 101 (2) 329-10 1 Skylark Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 C10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C20 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 2185 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2315UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet Caprice Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G20 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G30 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Impala Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K10 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K5 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Monza Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P20 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2316UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 continued Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 P30 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-100 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-150 Econoline Club Wagon Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 124.0in / 315.0mmin. Wheelbase 2 Joint Driveshaft; 2.350" Inside Lock-Up & 3.217" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 102 (3) 5.8L; Automatic 3 Joint Driveshaft 329-10 1 E-250 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-250 Econoline Club Wagon Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 E-350 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Elite Rear Shaft Rear Joint 101 (2) 534-10 1 F-100 Rear Shaft All Joints 225 (6,7,8) 4WD 3.622" Outside Lock-Up 329-10 3 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 534-10 1 2187 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2317UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty Ford F-150 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 3.622" Outside Lock-Up 329-10 1 F-250 Front Shaft Front Joint 232 (3) 4WD Full Time Transfer Case 329-10 1 Front Wheels All Joints 232 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 1 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD Part Time Transfer Case; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 232 (9,10,11) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 225 (6,7,8) 4WD 3.220" Outside Lock-Up; 2 Piece Rear Driveshaft 329-10 3 Rear Shaft All Joints 208 (7,8) 4WD 3.220" Outside Lock-Up; 1 Piece Rear Driveshaft 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft; 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.622" Outside Lock-Up 330-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft; 3.217 & 3.622" Outside Lock-Up 330-10 1 F-350 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 3 Gran Torino Rear Shaft Rear Joint 101 (2) 534-10 1 Granada Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang II Rear Shaft Rear Joint 101 (2) 534-10 1 P-350 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 C15 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 2188 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2318UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty GMC C15 Suburban continued Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 C25 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C25 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 1.188" Bearing Cap Diameter 330-10 1 G15 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G25 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 G35 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 K15 Rear Shaft Rear Joint 225 (8) 329-10 1 K15 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25 Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 K25 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 225 (6,7,8) 1.063" Bearing Cap Diameter 329-10 1 P15 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25 Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 P35 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 1.188" Bearing Cap Diameter 330-10 1 2189 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2319UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty GMC Sprint Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 International Scout II Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 CJ6 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 J10 Rear Shaft Rear Joint 225 (8) 329-10 1 J20 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mercury Bobcat Rear Shaft Rear Joint 101 (2) 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; 329-10 1 Rear Shaft Front Joint 101 (1) 6.6L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.6L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.5L; 534-10 1 Grand Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 2190 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2320UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1975 Position Application Attributes Application Notes Part NumberQty Mercury Monarch Rear Shaft Rear Joint 101 (2) 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile Starfire Rear Shaft Rear Joint 101 (2) 329-10 1 Pontiac Astre Rear Shaft Rear Joint 101 (2) 329-10 1 Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1974 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Matador Rear Shaft Rear Joint 101 (2) 329-10 1 Buick Apollo Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 C10 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 2191 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2321UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Caprice Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G30 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2322UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1974 Position Application Attributes Application Notes Part NumberQty Chevrolet P20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-200 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Gran Torino Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang II Rear Shaft Rear Joint 101 (2) 534-10 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 2193 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2323UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1974 Position Application Attributes Application Notes Part NumberQty Ford Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) 330-10 1 G35/G3500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Jimmy Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft All Joints 225 (6,7,8) 4WD 329-10 3 Rear Shaft All Joints 101 (1,2) RWD; Automatic 329-10 2 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 2194 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2324UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1974 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 P15/P1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Sprint Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Cherokee Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) Manual 329-10 1 J10 Rear Shaft Rear Joint 225 (8) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD; Automatic 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD; Manual 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 2195 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2325UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1974 Position Application Attributes Application Notes Part NumberQty Mercury Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Safari Rear Shaft All Joints 101 (1,2) 329-10 1 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1973 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Matador Rear Shaft Rear Joint 101 (2) 329-10 1 Buick Apollo Rear Shaft All Joints 101 (1,2) 329-10 2 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 C10 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 2196 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2326UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet C30 Pickup continued Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Caprice Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G30 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 Nova Rear Shaft All Joints 101 (1,2) 329-10 2 P10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 2197 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2327UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1973 Position Application Attributes Application Notes Part NumberQty Chevrolet P10 Van continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 329-10 4 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-200 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Gran Torino Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 2198 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2328UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1973 Position Application Attributes Application Notes Part NumberQty Ford P-350 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) 330-10 1 G35/G3500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 2199 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2329UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1973 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Suburban continued Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 P15/P1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Sprint Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 International 1310 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2200 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2330UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1973 Position Application Attributes Application Notes Part NumberQty Jeep J-4500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Rear Joint 101 (2) 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Safari Rear Shaft All Joints 101 (1,2) 329-10 1 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1972 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 2201 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2331UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty American Motors Matador Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 C10 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Caprice Rear Shaft Rear Joint 101 (2) 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G30 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 2202 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2332UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K20 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 K20 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Kingswood Rear Shaft Rear Joint 218 (3) 329-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 5.7L; 329-10 1 Rear Shaft Rear Joint 101 (2) 6.6L; 329-10 1 Nova Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 329-10 4 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-200 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 2203 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2333UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty Ford E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-100 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Gran Torino Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 129 (1,2,3,4) 4 Joint Driveshaft 329-10 4 Rear Shaft Front Joint 101 (1) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 534-10 1 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 2204 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2334UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) 330-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G35/G3500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Jimmy Rear Shaft Rear Joint 101 (2) RWD 329-10 1 K15/K1500 Pickup Rear Shaft Rear Joint 225 (8) 329-10 1 K15/K1500 Suburban Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 P15/P1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 2205 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2335UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty GMC P25/P2500 Van continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Sprint Rear Shaft All Joints 101 (1,2) Automatic; AT218 329-10 2 Rear Shaft All Joints 101 (1,2) Manual 329-10 2 International 1310 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 329-10 1 M1100 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 5-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 2206 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2336UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1972 Position Application Attributes Application Notes Part NumberQty Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mark IV Rear Shaft Rear Joint 101 (2) 534-10 1 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; 329-10 1 Rear Shaft Rear Joint 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Safari Rear Shaft All Joints 101 (1,2) 329-10 1 Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1971 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Matador Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 2207 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2337UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet Blazer continued Rear Shaft Rear Joint 101 (2) RWD 329-10 1 C10 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Caprice Rear Shaft Rear Joint 101 (2) 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G30 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 218 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K20 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 2208 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2338UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty Chevrolet K20 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 Kingswood Rear Shaft Rear Joint 218 (3) 329-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 5.7L; 329-10 1 Rear Shaft Rear Joint 101 (2) 6.6L; 329-10 1 Nova Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Vega Rear Shaft Rear Joint 101 (2) 329-10 1 Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 329-10 4 Dodge W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 2209 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2339UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty Ford E-200 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-100 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P-350 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Pinto Rear Shaft Rear Joint 101 (2) 534-10 1 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 2210 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2340UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Suburban Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) 330-10 1 G15/G1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G35/G3500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Jimmy Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 2211 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2341UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty GMC K35/K3500 Pickup continued Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 P15/P1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Sprint Rear Shaft All Joints 101 (1,2) Automatic; AT218 329-10 2 Rear Shaft All Joints 101 (1,2) Manual 329-10 2 International 1310 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 329-10 1 M1100 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 5-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Scout Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2212 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2342UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty Jeep J-4500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Jeepster Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mark III Rear Shaft Front Two Joints 203 (1,2) 329-10 1 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 5.8L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 Grand Safari Rear Shaft All Joints 101 (1,2) 329-10 1 2213 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2343UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1971 Position Application Attributes Application Notes Part NumberQty Pontiac Ventura Rear Shaft Rear Joint 101 (2) 329-10 1 1970 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Gremlin Rear Shaft Rear Joint 101 (2) 329-10 1 Hornet Rear Shaft Rear Joint 101 (2) 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Rebel Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Brookwood Rear Shaft All Joints 101 (1,2) 3 Joint Driveshaft 329-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Exc. THM400 Trans. 329-10 2 C10 Pickup Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C20 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) 1.063" Bearing Cap Diameter 329-10 1 Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Caprice Rear Shaft Rear Joint 101 (2) 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) Manual 329-10 2 2214 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2344UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G30 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K20 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K20 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 Kingswood Rear Shaft Rear Joint 101 (2) 329-10 1 Monte Carlo Rear Shaft Rear Joint 101 (2) 329-10 1 Nova Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 2215 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2345UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial Rear Shaft All Joints 203 (1,2,3,4) 4 Joint Driveshaft 329-10 4 Dodge W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 E-200 Econoline Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-100 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 Falcon Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Maverick Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 2216 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2346UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty Ford P-350 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 3 Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 2 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 1.188" Bearing Cap Diameter 330-10 1 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) 330-10 1 G15/G1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G35/G3500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Jimmy Rear Shaft Rear Joint 225 (8) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 2217 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2347UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty GMC K25/K2500 Pickup continued Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 208 (3,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 K35/K3500 Pickup Front Shaft All Joints 208 (3,5) 1.188" Bearing Cap Diameter 330-10 1 Front Shaft All Joints 225 (3,4,5) 1.063" Bearing Cap Diameter 329-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.188" Bearing Cap Diameter 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft All Joints 208 (7,8) 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft All Joints 208 (7,8) 1.063" Bearing Cap Diameter 329-10 1 P15/P1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.188" Bearing Cap Diameter 330-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; 1.063" Bearing Cap Diameter 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 International 1000D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1100D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Rear Shaft Rear Joint 102 (3) RWD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 329-10 1 1200D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1300D Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 329-10 1 M1100 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 2218 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2348UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty International M1100 continued Rear Shaft Rear Joint 102 (3) 5-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Scout Rear Shaft Rear Joint 101 (2) RWD 329-10 1 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-4800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2219 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2349UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1970 Position Application Attributes Application Notes Part NumberQty Jeep Jeepster Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Lincoln Continental Rear Shaft All Joints 203 (1,2,3,4) 329-10 4 Mark III Rear Shaft Front Two Joints 203 (1,2) 329-10 1 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 Rear Shaft Rear Joint 101 (2) 5.0L; 534-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Oldsmobile 442 Rear Shaft Front Joint 101 (1) 329-10 1 98 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Cutlass Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Vista Cruiser Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 1969 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2350UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty American Motors Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Rambler Rear Shaft Rear Joint 101 (2) 329-10 1 Rebel Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Exc. THM400 Trans. 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Exc. THM400 Trans. 329-10 1 Blazer Front Shaft Front Joint 225 (3) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD; 4-Speed; Manual 329-10 1 Brookwood Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft; Exc. THM400 Trans. 329-10 2 Rear Shaft All Joints 218 (1,2,3) 3 Joint Driveshaft 329-10 3 C10 Pickup Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Automatic 330-10 3 Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Camaro Rear Shaft All Joints 101 (1,2) 329-10 2 Chevelle Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 Corvair Rear Half Shafts All Joints 222 (1,2) 329-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) Manual 329-10 2 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2351UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty Chevrolet G20 Van continued Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Exc. THM400 Trans. 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K20 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K20 Suburban Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 Nova Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 329-10 2 Dodge W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Front Shaft Front Joint 106 (3) 329-10 1 Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2352UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty Ford Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 E-100 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 E-200 Econoline Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 E-300 Econoline Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 329-10 2 Rear Shaft Center and Rear Joint 102 (2,3) 3 Joint Driveshaft 329-10 2 F-100 Front Wheels All Joints 128 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 2 Front Wheels All Joints 120 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 2 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 Falcon Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 P-100 Rear Shaft All Joints 101 (1,2) 329-10 2 P-350 Rear Shaft All Joints 101 (1,2) 329-10 2 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 2223 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2353UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty GMC C15/C1500 Pickup continued Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) Manual 330-10 1 G15/G1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 P15/P1500 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 2224 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2354UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty International 1000D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1100D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1200D Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 M1100 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 5-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Gladiator Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 J-3600 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 J-3700 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 2225 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2355UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty Jeep J-3700 continued Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 J-3800 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Jeepster Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Lincoln Continental Rear Shaft All Joints 101 (1,2) 329-10 2 Mark III Rear Shaft Front Two Joints 203 (1,2) 329-10 1 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 Rear Shaft Rear Joint 101 (2) 5.0L; 534-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 5.0L; 534-10 1 Rear Shaft Rear Joint 101 (2) 5.8L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Oldsmobile 442 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 98 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 2226 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2356UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1969 Position Application Attributes Application Notes Part NumberQty Pontiac Firebird Rear Shaft All Joints 101 (1,2) 329-10 2 1968 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 American Rear Shaft Rear Joint 101 (2) Automatic 329-10 1 Javelin Rear Shaft Rear Joint 101 (2) 329-10 1 Rebel Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 C10 Pickup Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Automatic 330-10 3 Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Camaro Rear Shaft Rear Joint 101 (2) 329-10 1 Caprice Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Chevy II Rear Shaft Rear Joint 101 (2) 329-10 1 Corvair Rear Half Shafts All Joints 222 (1,2) 329-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) Manual 329-10 2 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2357UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty Chevrolet G10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K20 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K20 Suburban Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 P10 Van Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 P20 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 P30 Van Rear Shaft Rear Joint 102 (3) 330-10 1 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 329-10 2 Dodge W100 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Pickup Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Front Shaft Front Joint 106 (3) 329-10 1 Rear Shaft Rear Joint 106 (8) 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2358UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty Ford Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 F-100 Front Wheels All Joints 128 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 2 Front Wheels All Joints 120 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 2 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Center and Rear Joint 102 (2,3) 1.188" Bearing Cap Diameter 330-10 2 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 P-100 Rear Shaft All Joints 101 (1,2) 329-10 2 P-350 Rear Shaft All Joints 101 (1,2) 329-10 2 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Torino Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C15/C1500 Suburban Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 2229 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2359UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty GMC C25/C2500 Suburban Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) Manual 330-10 1 G15/G1500 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K15/K1500 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K25/K2500 Suburban Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 P15/P1500 Van Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 P35/P3500 Van Rear Shaft Rear Joint 102 (3) 330-10 1 International 1000C Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1100C Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 1200C Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 M1100 Rear Shaft Rear Joint 102 (3) 3-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 Rear Shaft Rear Joint 102 (3) 5-Speed; Manual 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2360UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty International M1100 continued Rear Shaft Rear Joint 102 (3) Automatic 329-10 1 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ5A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Gladiator Front Shaft Front Joint 209 (3) 2 Joint Driveshaft; Inside Lock Rings 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft; Inside Lock Rings 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3500 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 J-3600 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 J-3700 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 2231 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2361UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty Jeep J-3700 continued Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 2 Joint Driveshaft 329-10 1 Front Shaft Front Joint 225 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 209 (7) 2 Joint Front Driveshaft 329-10 1 Rear Shaft Rear Joint 225 (8) 3 Joint Front Driveshaft 329-10 1 Jeepster Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Lincoln Continental Rear Shaft All Joints 101 (1,2) 329-10 2 Mark III Rear Shaft Front Two Joints 203 (1,2) 329-10 1 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 Rear Shaft Rear Joint 101 (2) 4.7L; 534-10 1 Rear Shaft Rear Joint 101 (2) 5.0L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 5.0L; 534-10 1 Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montclair Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montego Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Park Lane Rear Shaft Rear Joint 101 (2) 534-10 1 2232 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2362UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1968 Position Application Attributes Application Notes Part NumberQty Oldsmobile 442 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 98 Rear Shaft Front Joint 101 (1) 7.5L; 329-10 1 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 329-10 1 1967 Position Application Attributes Application Notes Part NumberQty American Motors Ambassador Rear Shaft Rear Joint 101 (2) 329-10 1 Rebel Rear Shaft Rear Joint 101 (2) 329-10 1 Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 C10 Pickup Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C10 Suburban Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C20 Suburban Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 329-10 2 Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft All Joints 101 (1,2) Automatic 329-10 2 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic 330-10 2 Rear Shaft Front Joint 102 (1) Automatic 329-10 1 Camaro Rear Shaft Rear Joint 101 (2) 329-10 1 Caprice Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Chevy II Rear Shaft Rear Joint 101 (2) 329-10 1 Corvair Rear Half Shafts All Joints 222 (1,2) 329-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2363UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty Chevrolet El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G20 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 K10 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K10 Suburban Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft All Joints 225 (6,7,8) 329-10 3 K20 Panel Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K20 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 K20 Suburban Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 Malibu Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 P20 Series Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2364UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty Chrysler Imperial Rear Shaft All Joints 101 (1,2) 329-10 2 New Yorker Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Newport Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Dodge Charger Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Coronet Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Monaco Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Polara Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Front Shaft Front Joint 106 (3) 329-10 1 Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 Econoline Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 F-100 Front Wheels All Joints 128 (1,2) 4WD Outside Lock Rings; 2 Piece Rear Driveshaft 330-10 2 Front Wheels All Joints 120 (1,2) 4WD Outside Lock Rings; 1 Piece Rear Driveshaft 330-10 2 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 Galaxie Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Front Joint 101 (1) 7.0L; 329-10 1 2235 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2365UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty Ford Mustang continued Rear Shaft Rear Joint 101 (2) 6.4L; 534-10 1 Rear Shaft Rear Joint 101 (2) 7.0L; 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 329-10 2 P-350 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 Rear Shaft Rear Joint 101 (2) 534-10 1 GMC C15/C1500 Pickup Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C25/C2500 Pickup Rear Shaft All Joints 102 (1,2,3) 4-Speed; Manual 330-10 3 C35/C3500 Pickup Rear Shaft Rear Joint 102 (3) Manual 330-10 1 G15/G1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G25/G2500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 225 (3) 329-10 1 Rear Shaft Rear Joint 225 (8) 329-10 1 K25/K2500 Pickup Front Shaft All Joints 208 (3,5) 329-10 2 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Intermediate Shaft Front and Rear Joints 208 (4,6) 3-Speed; Manual 329-10 2 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 P15/P1500 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 P25/P2500 Van Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2366UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty International M700 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Jeep CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ5A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Commando Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Gladiator Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2237 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2367UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty Jeep Jeepster Front Shaft Front Joint 209 (3) 2.2L; 329-10 1 Front Shaft Front Joint 209 (3) 3.7L; 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Lincoln Continental Rear Shaft All Joints 101 (1,2) 329-10 2 Mercury Brougham Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Caliente Rear Shaft Rear Joint 101 (2) 534-10 1 Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cougar Rear Shaft Front Joint 101 (1) 6.4L; 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Marquis Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montclair Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Park Lane Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Supreme Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 F85 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Plymouth Belvedere Rear Shaft All Joints 101 (1,2) 7.0L; Outside Lock Rings 329-10 2 2238 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2368UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1967 Position Application Attributes Application Notes Part NumberQty Plymouth Belvedere continued Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 Fury Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 GTX Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Satellite Rear Shaft All Joints 101 (1,2) 7.0L; Outside Lock Rings 329-10 2 Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 Pontiac Firebird Rear Shaft Rear Joint 101 (2) Incl. 2 Inside and 2 Outside Lock Rings 329-10 1 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 C10 Pickup Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic 329-10 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic 330-10 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic 3 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual 330-10 1 C30 Panel Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic 330-10 2 Rear Shaft Front Joint 102 (1) Automatic 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic 330-10 2 Rear Shaft Front Joint 102 (1) Automatic 329-10 1 Caprice Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Chevy II Rear Shaft Rear Joint 101 (2) 329-10 1 Corvair Rear Half Shafts All Joints 222 (1,2) 329-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2369UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1966 Position Application Attributes Application Notes Part NumberQty Chevrolet Corvette continued Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft; Outside Lock Rings 329-10 1 K10 Pickup Front Shaft Front Joint 208 (3) 329-10 1 K20 Pickup Front Shaft Front Joint 208 (3) 329-10 1 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 Malibu Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 329-10 2 New Yorker Rear Shaft Front Joint 101 (1) 329-10 1 Newport Rear Shaft Front Joint 101 (1) 329-10 1 Dodge Charger Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Coronet Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Monaco Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 Polara Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Bronco Front Shaft Front Joint 106 (3) 329-10 1 Rear Shaft Rear Joint 106 (8) 329-10 1 Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2370UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1966 Position Application Attributes Application Notes Part NumberQty Ford Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 Econoline Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 3 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 F-350 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 Galaxie Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 329-10 2 P-350 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ranch Wagon Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC G1000 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 K15/K1500 Pickup Front Shaft Front Joint 208 (3) 329-10 1 Intermediate Shaft Rear Joint 208 (6) 3-Speed; Manual HD Transmission 329-10 1 Intermediate Shaft Rear Joint 208 (6) 4-Speed; Manual 329-10 1 PB1000 Series Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) Automatic 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) Automatic 2 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2371UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1966 Position Application Attributes Application Notes Part NumberQty GMC PB1000 Series continued Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 PB15 Series Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 PB25 Series Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Suburban Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 International M700 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Jeep CJ3 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ5A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6A Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Gladiator Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2242 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2372UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1966 Position Application Attributes Application Notes Part NumberQty Jeep J-3500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Front Shaft Front Joint 209 (3) 4WD 329-10 1 Lincoln Continental Rear Shaft All Joints 101 (1,2) 329-10 2 Mercury Caliente Rear Shaft Rear Joint 101 (2) 534-10 1 Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Comet Rear Shaft Rear Joint 101 (2) 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Montclair Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Park Lane Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 F85 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Vista Cruiser Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 Plymouth Belvedere Rear Shaft All Joints 101 (1,2) 7.0L; Outside Lock Rings 329-10 2 Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 2243 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2373UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1966 Position Application Attributes Application Notes Part NumberQty Plymouth Fury Rear Shaft All Joints 101 (1,2) 7.0L; Outside Lock Rings 329-10 2 Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 Satellite Rear Shaft All Joints 101 (1,2) 7.0L; Outside Lock Rings 329-10 2 Rear Shaft All Joints 101 (1,2) 7.2L; Outside Lock Rings 329-10 2 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet Bel Air Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Biscayne Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 C10 Pickup Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) Automatic; THM400 2 Joint Driveshaft 329-10 1 C20 Pickup Rear Shaft All Joints 101 (1,2) 4-Speed; Manual 330-10 2 Rear Shaft Front Joint 101 (1) 2-Speed; Automatic 329-10 1 Rear Shaft Front Joint 101 (1) 3-Speed; Manual 329-10 1 Rear Shaft Front and Center Joints 102 (1,2) 3-Speed; Automatic 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2-Speed; Automatic 330-10 1 Rear Shaft Rear Joint 102 (3) 3-Speed; Automatic 3 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 101 (2) 3-Speed; Manual 330-10 1 C30 Panel Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic 330-10 2 Rear Shaft Front Joint 102 (1) Automatic 329-10 1 C30 Pickup Rear Shaft All Joints 102 (1,2,3) Manual 330-10 3 Rear Shaft Center and Rear Joint 102 (2,3) Automatic 330-10 2 Rear Shaft Front Joint 102 (1) Automatic 329-10 1 Chevelle Rear Shaft Rear Joint 101 (2) 329-10 1 Chevy II Rear Shaft Rear Joint 101 (2) 329-10 1 Corvair Rear Half Shafts All Joints 222 (1,2) 329-10 2 Corvette Rear Half Shafts All Joints 230 (3,4,5,6) 330-10 4 Rear Shaft All Joints 230 (1,2) 329-10 2 El Camino Rear Shaft Rear Joint 101 (2) Outside Lock Rings 329-10 1 G10 Van Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Impala Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2374UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1965 Position Application Attributes Application Notes Part NumberQty Chevrolet K10 Pickup Front Shaft Front Joint 208 (3) 329-10 1 K20 Pickup Front Shaft Front Joint 208 (3) 329-10 1 Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 1 Intermediate Shaft Front Joint 208 (4) 4-Speed; Manual 330-10 1 Rear Shaft All Joints 208 (7,8) 330-10 2 Malibu Rear Shaft Rear Joint 101 (2) 329-10 1 P10 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Chrysler Imperial Rear Shaft All Joints 101 (1,2) 329-10 2 New Yorker Rear Shaft Front Joint 101 (1) 329-10 1 Newport Rear Shaft Front Joint 101 (1) 329-10 1 Dodge W100 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 W200 Series Front Wheels All Joints 208 (1,2) Outside Lock Rings 330-10 2 Ford Country Sedan Rear Shaft Rear Joint 101 (2) 534-10 1 Country Squire Rear Shaft Rear Joint 101 (2) 534-10 1 Custom Rear Shaft Rear Joint 101 (2) 534-10 1 Econoline Rear Shaft All Joints 101 (1,2) Outside Lock Rings 329-10 2 F-100 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 F-250 Front Wheels All Joints 208 (1,2) 4WD Outside Lock Rings 330-10 2 Intermediate Shaft Front and Rear Joints 208 (4,6) 4WD 329-10 2 Rear Shaft All Joints 101 (1,2) RWD 2 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 2 Rear Shaft All Joints 102 (1,2,3) RWD 3 Joint Driveshaft; 3.220" Outside Lock-Up 329-10 3 F-350 Rear Shaft Rear Joint 101 (2) RWD 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) RWD 3 Joint Driveshaft 329-10 1 Fairlane Rear Shaft Rear Joint 101 (2) 534-10 1 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2375UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1965 Position Application Attributes Application Notes Part NumberQty Ford Galaxie Rear Shaft Rear Joint 101 (2) 534-10 1 LTD Rear Shaft Rear Joint 101 (2) 534-10 1 Mustang Rear Shaft Rear Joint 101 (2) 534-10 1 P-100 Rear Shaft All Joints 101 (1,2) 329-10 2 P-350 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Ranch Wagon Rear Shaft Rear Joint 101 (2) 3.622" Outside Lock-Up 534-10 1 Ranchero Rear Shaft Rear Joint 101 (2) 534-10 1 Thunderbird Rear Shaft All Joints 101 (1,2) 329-10 2 GMC 1000 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 1500 Series Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 G1000 Series Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 PB1000 Series Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 PB1500 Series Rear Shaft All Joints 102 (1,2,3) 3-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) 3-Speed; Manual 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 101 (1,2) Automatic 2 Joint Driveshaft 329-10 1 Rear Shaft All Joints 102 (1,2,3) Automatic 3 Joint Driveshaft 329-10 1 Rear Shaft Front Joint 102 (1) 4-Speed; Manual 3 Joint Driveshaft 330-10 1 Rear Shaft Front Joint 101 (1) 4-Speed; Manual 2 Joint Driveshaft 330-10 1 Rear Shaft Rear Joint 102 (3) 4-Speed; Manual 3 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 101 (2) 4-Speed; Manual 2 Joint Driveshaft 329-10 1 PB2500 Series Rear Shaft All Joints 101 (1,2) 2 Joint Driveshaft 330-10 1 Rear Shaft All Joints 102 (1,2,3) 3 Joint Driveshaft 330-10 1 Suburban Rear Shaft Rear Joint 101 (2) 2 Joint Driveshaft 329-10 1 Rear Shaft Rear Joint 102 (3) 3 Joint Driveshaft 329-10 1 International AM120 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 AM130 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 2246 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2376UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1965 Position Application Attributes Application Notes Part NumberQty International M700 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 M800 Rear Shaft All Joints 101 (1,2) RWD 329-10 2 Jeep CJ3 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ5 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 CJ6 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Gladiator Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-100 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-200 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-210 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-220 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-230 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-2800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-300 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-310 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 2247 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2377UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1965 Position Application Attributes Application Notes Part NumberQty Jeep J-320 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-330 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3500 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3600 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3700 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 J-3800 Front Shaft Front Joint 209 (3) 329-10 1 Rear Shaft Rear Joint 209 (7) 329-10 1 Wagoneer Rear Shaft Rear Joint 209 (7) 4WD 329-10 1 Rear Shaft Rear Joint 101 (2) RWD; Automatic 329-10 1 Lincoln Continental Rear Shaft All Joints 101 (1,2) 329-10 2 Mercury Colony Park Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Comet Rear Shaft Rear Joint 101 (2) Automatic 534-10 1 Cyclone Rear Shaft Rear Joint 101 (2) Automatic 534-10 1 Marauder Rear Shaft Rear Joint 101 (2) 534-10 1 Montclair Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Monterey Rear Shaft Front Joint 101 (1) 3.622" Outside Lock-Up 329-10 1 Rear Shaft Rear Joint 101 (2) 534-10 1 Park Lane Rear Shaft Rear Joint 101 (2) 534-10 1 Oldsmobile 442 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 98 Rear Shaft Front Joint 101 (1) Outside Lock Rings 329-10 1 Cutlass Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 F85 Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 2248 ALUMINUM COATED U-JOINTS AVAILABLE SEE PAGE v 2378UNIVERSAL JOINTS Precision Driveline U-Joint Bolt Kits 1965 Position Application Attributes Application Notes Part NumberQty Oldsmobile Vista Cruiser Rear Shaft All Joints 101 (1,2) Outside Lock Rings 330-10 2 2249 2022 UNIVERSAL JOINT CATALOG 2022 UNIVERSAL JOINT CATALOG





Copyright A1 Auto Parts.

Payments listed can only be used for products in your cart.
These payments can not be used to pay for services at our physical store.
Our store location Accepts
  • Cash
  • Debit or Credit Card
    We do not accept American Express
    (Only when the card it self is physicaly present and the person who was issued the card is using it and showing proper identification)
  • Check
    (Only when the account is drawn on a bank located in Nolan County Texas USA and the owner of the account is present with proper id and physically lives in Nolan county Texas USA)
    •  Pay with PayPal, PayPal Credit or any major credit card